Kenmore Range 362.74624300 (36274624300, 362 74624300) Parts
Genuine Ge part
By: Ge
Part Number: WB01K10002
Phillips head mounting screw for range control knobs and switches. Replaces lost, stripped, or damaged screws. 8-32 thread size for secure installation.
More
Genuine Ge part
By: Ge
Part Number: WB1K5
8-18 x 1/2 inch screw for gas range assembly. Replace when missing, stripped, or corroded during oven repairs or maintenance work.
Do-It-Yourself Stories from Customers like You
Oven not lighting John D. • Orlando , FL • January 16, 2024
We replaced the igniter. To do the job right you need to pull the oven off the wall (this was the 6 burner with griddle dual oven). you need to get to the igniter plug by taking off the entire back.... easier than it sounds... the hardest part is sliding the stove out and back in... I only need a 1/4 in driver for the whole job.... it is easier if you take the oven doors off...
Read more
More
$7.40
- Compare At:
-
$8.36
- You Save:
-
$0.96
Genuine Ge part
By: Ge
Part Number: WB34K10086
Stamped metal shield that protects the oven's lower cavity and insulation from excessive heat. Replace if cracked, rusted, corroded, or damaged.
More
$107.95
- Compare At:
-
$127.38
- You Save:
-
$19.43
Genuine Ge part
By: Ge
Part Number: WB39K20
Secures the lower storage drawer assembly to your range cabinet. Replace this stamped metal bracket if cracked, bent, or missing to restore alignment.
More
Genuine Ge part
By: Ge
Part Number: WB1K63
Replacement mounting screw for electric and gas ranges. Secures internal components and panels. Needed when original screws are stripped, missing, or lost.
More
$36.95
- Compare At:
-
$43.60
- You Save:
-
$6.65
Genuine Ge part
By: Ge
Part Number: WB1K83
Secures the burner valve assembly to your gas range. Replace this mounting screw if worn, missing, or stripped to restore proper valve alignment and support.
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Genuine Ge part
By: Ge
Part Number: WZ4X345D
Mounting screw for range installation and assembly. Replace missing, stripped, or damaged screws to secure panels, brackets, or components properly.
More
Genuine Ge part
By: Ge
Part Number: WB28K10030
Burner orifice spud for gas range conversion between natural gas and LP. Replace broken, missing, or incorrect size orifices when converting fuel type.
Do-It-Yourself Stories from Customers like You
Propane to natural gas conversion on range and dryer Vincent P. • Howell , NJ • October 09, 2014
Confirmed parts needed through online chat with tech and followed video instructions for dryer conversion. Found a video online for range conversion. Replaced orifices for stove top and adjusted oven burner orifices and air shutters and inverted pin in pressure regulator to natural gas position. All went well with no problems, about an hour and a half to gather tools and complete both jobs. Probably could be done faster but I was taking my time.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1K2
Speed nut clip secures your range oven bottom panel. Replace when missing or damaged to prevent panel rattling. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Missing clips Kathy I. • Port Huron , MI • January 11, 2015
Removed bottom tray then pushed clips over ledge
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB1K44
Replacement mounting screw for electric and gas range panels, trim, and brackets. Needed when original fastener is stripped, missing, or damaged.
Do-It-Yourself Stories from Customers like You
Oven lock failed so self cleaning unit would not engage Alice L. • Martinez , CA • September 17, 2018
Replaced old lock and installed replacement lock and now have a happy wife.
Read more
More
$7.00
- Compare At:
-
$8.36
- You Save:
-
$1.36
Genuine Ge part
By: Ge
Part Number: WB1K45
Screw and washer assembly for securing cooktop and internal range components. Replace if missing, rusted, stripped, or damaged during appliance repair.
Do-It-Yourself Stories from Customers like You
I replaced the cooktop in my range. Carol Z. • Bronx , NY • November 02, 2020
My 12 year-old cooktop was rusted through in a couple of key places, but the rest of my range was in terrific shape, so I decided to order a replacement cooktop. The perfect part arrived quickly. When I took a closer look at the few connecting parts I thought I was going to pirate off the old cooktop, I saw some were rusty, particularly the two Guide Slides and one screw. I needed to buy a set of star drivers, too, as a #10 was needed. I put a little WD40 on the parts I had to remove when I...
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB2K36
Secures your range power cord at cabinet entry to prevent wire damage and disconnection. Replace if cord is loose or clamp is cracked. Confirm fit with your model number.
More
$7.00
- Compare At:
-
$8.36
- You Save:
-
$1.36
Genuine Ge part
By: Ge
Part Number: WB2K66
Right-side guide support secures sliding drawer or shelf rails on your range. Replace if cracked, broken, or worn to restore smooth tracking and alignment.
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB32K2
Cushions your range oven door perimeter to prevent metal contact and reduce heat loss. Replace when worn, compressed, or door closes harshly. Confirm fit.
More
$12.95
- Compare At:
-
$40.56
- You Save:
-
$27.61
Genuine Ge part
By: Ge
Part Number: WB39K16
Drawer slide rail for electric and gas ranges. Mounts to the drawer box to enable smooth gliding. Replace if bent, broken, or worn for proper operation.
More
$27.95
- Compare At:
-
$33.54
- You Save:
-
$5.59
Genuine Ge part
By: Ge
Part Number: WB63K10233
Support base for electric and gas ranges. Provides structural support for internal components. Replace if cracked, broken, or missing to restore stability.
More
$23.65
- Compare At:
-
$28.14
- You Save:
-
$4.49