Kenmore Range 362.75375690 (36275375690, 362 75375690) Parts
Genuine Ge part
By: Ge
Part Number: WB1K66
This part has been discontinued and is no longer available.
More
Genuine Ge part
By: Ge
Part Number: WB13K25
The Spark Module is an OEM replacement part for GE gas ranges. It is responsible for generating electric sparks to ignite the gas burners on the cooktop. The spark module produces consecutive sparks when a surface burner knob is turned on, which ignite the gas mixture and allows the burner flame to ignite safely and consistently.
Causes of a bad spark module can include faulty electrodes, worn internal components that hamper sparking, or damage due to moisture intrusion or power surges over time.
Symptoms of a bad spark module include:
- Burners that will not ignite or only intermittently ignite
- Flashback or burning above the burner head
- The smell of gas when turning burners on
This GE replacement part is also compatible with models from Hotpoint, RCA, and certain Kenmore gas ranges.
Do-It-Yourself Stories from Customers like You
GE Gas Cooktop Wouldn't Light Michael S. • Owasso , OK • March 17, 2014
My problem was intermittent spark and then no spark. My first fix was to give my wife one of those long BBQ grill lighters but after about a week she told me to "FIX IT". After researching the problem on the internet I determined it was likely one of three things: IGNITERS (not likely), SWITCHES (possible), or SPARK MODULE (most likely). I ordered the Spark Module on Sunday night and it arrived on Tuesday. I was totally surprised by the speed of delivery. Took about 30 minutes to install and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB10K12
Replacement oven door hinge assembly for ranges. Installs on the door frame to control opening and closing. Replace if broken, cracked, or no longer springs.
Do-It-Yourself Stories from Customers like You
Broken door hinge. Shari W. • Evansville , IN • February 07, 2018
By replacing the hinge.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1K56
This small metal clip secures the surface burner spark electrode to its bracket or burner base, holding the tip at the proper gap for reliable ignition. Replace a missing, bent, or corroded clip to help restore consistent sparking.
- Holds the surface burner spark electrode firmly in position near the burner head
- Maintains correct alignment and gap so the igniter can spark to the burner
- Can help with delayed ignition, intermittent sparking, or a burner that won't light
- Typical signs include a loose/wobbly electrode, visible damage, or a missing clip
What's included: 1 mounting clip Install notes:
- Disconnect power and shut off gas before servicing
- Lift the cooktop or remove burner components to access the electrode; note clip orientation
- Transfer the electrode into the new clip and seat the clip securely in its bracket or base
- Avoid stressing the electrode's ceramic insulator; verify the tip is aimed at the burner rim and test ignition
Do-It-Yourself Stories from Customers like You
Gas burner would not start Eileen L. • Hebron , MD • August 24, 2019
A new electrode and the great schismatics on your website. The only thing that took some time was removing the 2 screws in burner pan. Once removed it was very easy to fix.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB9K5
Do-It-Yourself Stories from Customers like You
Broken oven door spring. Mario P. • Cornwall , NY • April 22, 2023
Simple, replaced with a new one which was delivered sooner than expected. thank you
Read more
More
Genuine Ge part
By: Ge
Part Number: WB2K20
Anti-tip bracket kit installs to the floor behind your range or wall oven to prevent tipping. Replace if missing, damaged, or moving to a new home.
More
Genuine Ge part
By: Ge
Part Number: WB7K5338
Do-It-Yourself Stories from Customers like You
End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019
Somewhat difficult to slide back on because pieces of the old tabs were stuck in the crevace, but once I realized and fished them out the next challenge was finally figuring out part went inside the crevace and part (a tab) went outside on the back of the handle. If you bend over and look up underneath it is easy to see how it goes, but apparently over the years the handle had gotten just out of shape enough that the caps did not readily slide on. Be careful you don't snap a tab or post off. ...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB16K13
Genuine Ge part
By: Ge
Part Number: WB49K2
Do-It-Yourself Stories from Customers like You
Burned on pans Cheryl R. • Piney Creek , NC • October 30, 2015
New pans
Read more
More
Genuine Ge part
By: Ge
Part Number: WB7K5339
This handle cap is a replacement end cover that restores the clean finished look and protects the handle mounting on compatible refrigerators. It keeps the handle edges covered and helps prevent snags and cosmetic damage. What it does:
- Covers and protects the exposed end of a refrigerator door handle for a finished appearance
- Conceals handle mounting hardware and reduces dirt build-up around the handle area
- Helps prevent clothing snags and minimizes wear at the handle end
- Matches light white finish to blend with white appliance trim
What's included:
Install notes:
- Remove original cap by following the appliance manual; some models use hidden clips or a retaining screw
- Keep existing mounting hardware — this cap is a cosmetic cover and typically uses factory fasteners
- Avoid over-tightening clips or screws to prevent cracking the cap
Do-It-Yourself Stories from Customers like You
End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019
Somewhat difficult to slide back on because pieces of the old tabs were stuck in the crevace, but once I realized and fished them out the next challenge was finally figuring out part went inside the crevace and part (a tab) went outside on the back of the handle. If you bend over and look up underneath it is easy to see how it goes, but apparently over the years the handle had gotten just out of shape enough that the caps did not readily slide on. Be careful you don't snap a tab or post off. ...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB10K13
This support rivet securely fastens internal components within your range or oven structure. It provides structural stability for mounting brackets and panels inside the appliance. Replace this rivet if you notice loose parts rattling inside your oven or range components shifting during use.
More
Genuine Ge part
By: Ge
Part Number: WB2K11
Genuine Ge part
By: Ge
Part Number: WB32K5
Do-It-Yourself Stories from Customers like You
Oven would not light David A. • San Jose , CA • December 14, 2017
Control board, new oven light fixture, and receptacle along with the gasket. All I ever ask is get me the correct parts and AppliancePartsPros.com came through. Used them before to fix my gas dryer.
Cheers, David
Read more
More
Genuine Ge part
By: Ge
Part Number: WB2X1082
This retainer secures the oven door hinges in place and is located at the bottom corners of the oven door frame. Replace if the oven door sags, won't stay closed properly, or if the hinges appear loose or misaligned.
Do-It-Yourself Stories from Customers like You
Broken door hinge. Shari W. • Evansville , IN • February 07, 2018
By replacing the hinge.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB01K10004
Color: White. Mounting screw for end caps.
Do-It-Yourself Stories from Customers like You
Needed to replace two screws that were rusted Russell S. • Jefferson , GA • May 22, 2020
Replaced screws, would have liked to replace discolored plastic end plates but not for $35 to $40 dollars per end cap.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB14K5
Pivot pin that connects the oven door hinge to its mounting bracket. Replace if worn, broken, or missing to restore smooth door operation and alignment.
More