Kenmore Range 362.75702001 (36275702001, 362 75702001) Parts
Genuine Ge part
By: Ge
Part Number: WB1K2
Do-It-Yourself Stories from Customers like You
Missing clips Kathy I. • Port Huron , MI • January 11, 2015
Removed bottom tray then pushed clips over ledge
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WB1K45
Do-It-Yourself Stories from Customers like You
I replaced the cooktop in my range. Carol Z. • Bronx , NY • November 02, 2020
My 12 year-old cooktop was rusted through in a couple of key places, but the rest of my range was in terrific shape, so I decided to order a replacement cooktop. The perfect part arrived quickly. When I took a closer look at the few connecting parts I thought I was going to pirate off the old cooktop, I saw some were rusty, particularly the two Guide Slides and one screw. I needed to buy a set of star drivers, too, as a #10 was needed. I put a little WD40 on the parts I had to remove when I...
Read more
More
$9.91
- Compare At:
-
$10.90
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB2K66
Right-side guide support secures sliding drawer or shelf rails on your range. Replace if cracked, broken, or worn to restore smooth tracking and alignment.
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WB32K2
Cushions your range oven door perimeter to prevent metal contact and reduce heat loss. Replace when worn, compressed, or door closes harshly. Confirm fit.
More
$14.95
- Compare At:
-
$40.56
- You Save:
-
$25.61
Genuine Ge part
By: Ge
Part Number: WB39K16
Drawer slide rail for electric and gas ranges. Mounts to the drawer box to enable smooth gliding. Replace if bent, broken, or worn for proper operation.
More
$26.54
- Compare At:
-
$31.85
- You Save:
-
$5.31
Genuine Ge part
By: Ge
Part Number: WB7K266
Right-side white door end cap for range oven doors. Covers outer door edge and provides secure mounting for trim. Replace if cracked, loose, or missing.
More
$10.86
- Compare At:
-
$11.95
- You Save:
-
$1.09
Genuine Ge part
By: Ge
Part Number: WB02K10023
Secures the heating element in your range. Replace if loose, damaged, or causing element misalignment. Confirm fit with your model number for proper installation.
More
$6.95
- Compare At:
-
$8.36
- You Save:
-
$1.41
Genuine Ge part
By: Ge
Part Number: WB34K5
Protective wire cover for range burner igniter wires. Replaces cracked, broken, or missing covers. Shields wiring from damage inside the range cabinet.
Do-It-Yourself Stories from Customers like You
Degraded burner igniter wires Richard W. • Bakersfield , CA • August 19, 2016
Checked online instructions for range top ands rear upright removal. Cleaned inside surfaces before removing individual wires one at a time. Ran the new wires through retainers first, then to the correct igniters next. Replaced removed parts to restore.
Note: The remove the top burner screws from the cook top before trying to remove it. Otherwise, you will bend the burner gas supply tubes and possibly damage them if not done in sequence.
Utube mentioned using a screwdriver for the cook top...
Read more
More
$7.40
- Compare At:
-
$16.04
- You Save:
-
$8.64
Genuine Ge part
By: Ge
Part Number: WB01K10008
Cooktop mounting screw secures the cooktop to frame or brackets. Replace if stripped, missing, or rusty to eliminate wobble, rattling, or lifted corners.
Do-It-Yourself Stories from Customers like You
Burner was not working evenly Stephanie M. • Hubbard , IA • April 15, 2019
I used the parts ordered, minus the screw because it was not the right one, and replaced the burner. I just took the old parts off and put the new parts on. Super easy fix!
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB01K10093
This speed nut is a clip-on fastener that provides threads for a screw on the appliance. It secures sheet-metal panels, brackets, or trim and helps keep assemblies tight under vibration and repeated use.
- Provides captive threads so a screw can tighten into thin sheet metal
- Helps secure panels, brackets, and trim pieces in place
- Replace if a screw spins without tightening, a panel rattles/feels loose, or the original clip is missing or damaged
- Restores a snug, reliable attachment point without a loose nut
What's included: One speed nut Install notes:
- Disconnect power and, if applicable, shut off gas; allow the appliance to cool before servicing
- Note the clip's orientation; slide it onto the panel edge or stud as designed
- Start the screw by hand to avoid cross-threading; do not overtighten
- Wear cut-resistant gloves when handling sheet-metal parts
More
$9.91
- Compare At:
-
$10.90
- You Save:
-
$0.99
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB48K2
Slotted grid that rests over the broiler pan to support food during broiling. Replace if cracked, warped, worn, or missing to restore proper function.
Do-It-Yourself Stories from Customers like You
Needed a new broiler pan assembly Ken M. • Auburn , CA • January 03, 2021
The fix isn't as important as my ording experiance. Thank you to AppliancePartsPros.com. "Great,Outstanding Service", best I have experienced yet. Online ordering was a breeze and same day shipping turned a forcasted 8 day delivery into only 3, with standard shipping no less, FedEx. Easy to navigate web experience which made the process painless. I highly recommend AppliancePartsPros.com for any Appliance needs. Thank you so very much. Ken M. Auburn Ca.
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB01X23501
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB34K10013
This is a double drip pan is made for ranges, stoves, and cooktops. This is a genuine replacement part made by General Electric. The double drip pan is situated underneath two heated elements and is able to catch any food or debris that fall when cooking. The double drip pan is there to catch any and all waste so that the user may easily clean up after the heat is turned off and the appliance is cooled down.A new double drip pan might be needed if the current one is damaged in any way including being broken or bent so that is it not fully secure under the burner. This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with ranges, stoves, or cooktops made by General Electric.
Do-It-Yourself Stories from Customers like You
Abused grates and oven bottom Adrienne T. • Port Jervis , NY • June 26, 2015
Ordered parts ( very easy) and replaced old ones . Pop out, pop in. Simple but it made my stove and oven new again.
Read more
More
$139.50
- Compare At:
-
$166.00
- You Save:
-
$26.50
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB34K10086
Stamped metal shield that protects the oven's lower cavity and insulation from excessive heat. Replace if cracked, rusted, corroded, or damaged.
More
$113.46
- Compare At:
-
$133.88
- You Save:
-
$20.42
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB1K5
Size: 8-18 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Oven not lighting John D. • Orlando , FL • January 16, 2024
We replaced the igniter. To do the job right you need to pull the oven off the wall (this was the 6 burner with griddle dual oven). you need to get to the igniter plug by taking off the entire back.... easier than it sounds... the hardest part is sliding the stove out and back in... I only need a 1/4 in driver for the whole job.... it is easier if you take the oven doors off...
Read more
More
$9.95
- Compare At:
-
$10.95
- You Save:
-
$1.00
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WZ4X345D
$21.95
- Compare At:
-
$26.34
- You Save:
-
$4.39
Out Of Stock
Usually ships within 4 - 14 days