Kenmore Refrigerator 363.48252890 (36348252890, 363 48252890) Parts
Genuine Ge part
By: Ge
Part Number: WR77X668
$45.95
- Compare At:
-
$51.33
- You Save:
-
$5.38
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WZ6X136
$4.24
- Compare At:
-
$8.36
- You Save:
-
$4.12
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR60X30349
The Evaporator Fan Motor Kit is an OEM part compatible with GE refrigerators. It is a critical component responsible for circulating air and maintaining proper airflow within the refrigerator's evaporator system, ensuring efficient cooling and temperature regulation. It features a shaft that measures 3/8 of an inch and two right-side terminals. Notably, the motor no longer comes with harness wires, which must be obtained separately for installation.
Symptoms of a faulty evaporator fan motor include:
- Inconsistent or inadequate cooling in the refrigerator or freezer compartments
- Warm spots or temperature fluctuations within the refrigerator
- Excessive frost buildup or ice accumulation in the freezer
Causes of a bad evaporator fan motor can include wear and tear over time, electrical issues or short circuits, or physical damage from foreign objects or improper maintenance.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
The refrigerator would not cool nor freeze! Tom C. • Kenmore , WA • October 31, 2015
I called AppliancePartsPros.com and they helped me diagnose the problem for this very nice, and well designed refrigerator, that I wanted to keep rather than recycle at the local scrap yard. It turns out that all it needed was a small electric fan (i.e., evaporator fan) to circulate the air from the freezer coils throughout the refrigerator [all other major components were good]. It was really easy to locate the motor and fan and replace it. I saved hundreds of $$$. I really appreciated the...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X7391
The Fan Blade Grommet is an OEM replacement part for GE brand refrigerators. Located behind the evaporator fan blade where its central shaft passes through, this rubber sealing piece creates a protective barrier isolating the fan assembly.
Causes of a potentially problematic fan blade grommet include cracks or deterioration that develop from continuous vibration and impacts over extended use. Exposure to temperature fluctuations can also cause the rubber to harden and lose elasticity.
Symptoms of a faulty fan blade grommet include:
- Airflow obstructions within the duct
- Noisy vibrations from the fan assembly
- Rubber debris collecting on components
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore model refrigerators.
Do-It-Yourself Stories from Customers like You
I had a very noisy evaporator fan in older GE refrigerator top freezer Richard B. • Casa Grande , AZ • December 06, 2019
Replaced the evaporator fan motor, fan blade, and two rubber grommets. I was careful to mark screws and bolts with sticky notes to ensure getting them back in the right place. I had all the new parts ready before I started the job because I did not have an extra freezer for my food and I wanted to do this quickly and only once. New parts went in well, Took a while to install the ring for the new fan blade using my long nose pliers. I would have saved time if I had the special ring spreader...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X11561
Do-It-Yourself Stories from Customers like You
Ice maker stopped working. Jorge J. • Winter Garden , FL • April 05, 2019
Replaced Ice maker very easy.
Read more
More
Genuine Ge part
By: Ge
Part Number: WZ4X244D
Do-It-Yourself Stories from Customers like You
Broken drawers Sarah P. • Bronx , NY • January 10, 2016
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X252
This left-hand drawer slide assembly mounts inside the refrigerator's fresh food section. It supports the shelf/cover and guides the drawer on its track, restoring smooth operation and proper alignment when the original rail is cracked or worn.
- Mounts on the left wall to support the shelf/cover and provide a smooth sliding track for the drawer
- Keeps the drawer aligned and level for easy in-and-out movement
- Replace when the existing rail is cracked, warped, or missing tabs
- Typical symptoms: drawer hard to open/close, pops off track, shelf tilts or sags, visible damage to the rail
What's included: One left-side slide assembly Install notes:
- Disconnect power and clear the compartment before starting
- Remove the affected drawer and its shelf/cover to access the slide
- Release locking tabs or remove mounting screws; transfer any reusable hardware to the new slide
- Test drawer travel before reloading
Do-It-Yourself Stories from Customers like You
My ice maker bin smelled like freezer burn and ice tasted like it too Nancy R. • New Paltz , NY • November 18, 2014
I bought whole new ice bin and it it's now the ice is great.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X1714
Do-It-Yourself Stories from Customers like You
Fan blade making noise. Stan B. • Savage , MN • October 09, 2018
Changed the washer behind fan blade and it quieted right down.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X253
Do-It-Yourself Stories from Customers like You
Slide assembly left and right both were broken. Robert L. • Daytona Beach , FL • November 12, 2017
Ordered the parts and in a couple of days they arrived. A simple Philips screw driver was all that was needed to complete the install. Very simple, not complicated. You don't need to order the slide bushings as the slide assy. has them installed from the factory.
Appliance Parts Pros is the best!!!
terry,florida
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X7238
Do-It-Yourself Stories from Customers like You
Starting to hear strange noises from under and back of the refrigerator suspected it was probably the fan motor Billy S. • Granite City , IL • January 28, 2020
Did some research on Appliance Parts Pros site. Took a chance and ordered the parts I thought were needed. They came in three days. Suspicions confirmed. Relatively easy fix. All went well. Repair videos were especially helpful. Appreciate ease of repair and help from App Parts. Thanks
Read more
More
Genuine Ge part
By: Ge
Part Number: WR24X527
Genuine Ge part
By: Ge
Part Number: WR71X10715
Genuine Ge part
By: Ge
Part Number: WR2X9300
Do-It-Yourself Stories from Customers like You
Broken refrigerator door stop James W. • Alexandria , VA • August 21, 2017
Replaced the broken part. Exact fit. 15 minutes. Works perfectly.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X4676
This shelf support secures an interior refrigerator shelf in place so food items stay level and storage remains organized. It replaces a cracked or worn support to restore proper shelf seating and stability. What it does
- Holds a refrigerator shelf or shelf trim in the correct position to prevent sagging or tipping
- Restores stable support for glass or wire shelving that no longer stays seated
- Helps eliminate shelf movement that can cause items to slide or spill
- Works where a broken, chipped, or missing support prevents proper shelf alignment
What's included One shelf support Install notes
- Disconnect power to the appliance before starting any repair and empty the shelf area
- Remove the affected shelf or trim to access the support; reinstall shelf to confirm correct seating
- Use basic hand tools as needed and avoid forcing parts to prevent further damage
- Replace all affected pieces for consistent shelf alignment
More
Genuine Ge part
By: Ge
Part Number: WR2X8989
Genuine Ge part
By: Ge
Part Number: WR01X10064