Kenmore Refrigerator 363.48252897 (36348252897, 363 48252897) Parts
Genuine Ge part
By: Ge
Part Number: WR72X252
This left-hand drawer slide assembly mounts inside the refrigerator's fresh food section. It supports the shelf/cover and guides the drawer on its track, restoring smooth operation and proper alignment when the original rail is cracked or worn.
- Mounts on the left wall to support the shelf/cover and provide a smooth sliding track for the drawer
- Keeps the drawer aligned and level for easy in-and-out movement
- Replace when the existing rail is cracked, warped, or missing tabs
- Typical symptoms: drawer hard to open/close, pops off track, shelf tilts or sags, visible damage to the rail
What's included: One left-side slide assembly Install notes:
- Disconnect power and clear the compartment before starting
- Remove the affected drawer and its shelf/cover to access the slide
- Release locking tabs or remove mounting screws; transfer any reusable hardware to the new slide
- Test drawer travel before reloading
Do-It-Yourself Stories from Customers like You
My ice maker bin smelled like freezer burn and ice tasted like it too Nancy R. • New Paltz , NY • November 18, 2014
I bought whole new ice bin and it it's now the ice is great.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR71X10715
Genuine Ge part
By: Ge
Part Number: WR72X253
Do-It-Yourself Stories from Customers like You
Slide assembly left and right both were broken. Robert L. • Daytona Beach , FL • November 12, 2017
Ordered the parts and in a couple of days they arrived. A simple Philips screw driver was all that was needed to complete the install. Very simple, not complicated. You don't need to order the slide bushings as the slide assy. has them installed from the factory.
Appliance Parts Pros is the best!!!
terry,florida
Read more
More
Genuine Ge part
By: Ge
Part Number: WZ4X244D
Do-It-Yourself Stories from Customers like You
Broken drawers Sarah P. • Bronx , NY • January 10, 2016
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR60X10030
Do-It-Yourself Stories from Customers like You
Condenser fan blade broke when we were cleaning under the refrigerator Carla S. • Raytown , MO • July 31, 2015
It was fairly simple. The blade just slides onto the post of the condenser. Thanks to Appliance Pros, we should not have this problem again. We were offered to buy a special 28" long brush made to clean the refrigerator coils, and it works great! :)
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X10323
Do-It-Yourself Stories from Customers like You
Refrigerator and freezer not cooling. Eric O. • Long Beach , CA • August 07, 2017
This is in a 15 year old Built-in Monogram that had the compressor replaced a few years ago. Before discovering the motor failure I replaced the main board since a Refrigeration Contractor I know said that if it wasn't bad it would be soon since those parts typically only last around eight years.
The motor replacement is pretty simple; more time is spent getting to the motor and re-assembling everything than actually changing the motor. The trickiest part is getting the fan set correctly on...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X9300
Do-It-Yourself Stories from Customers like You
Broken refrigerator door stop James W. • Alexandria , VA • August 21, 2017
Replaced the broken part. Exact fit. 15 minutes. Works perfectly.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X10100
Do-It-Yourself Stories from Customers like You
Ice maker was getting clogged with ice and would not dispense. Randall D. • Aylett , VA • December 08, 2019
Found that piece of auger was broken up front. Ordered auger and several other parts associated with ice maker just to be sure. Also replaced condenser motor which was making noise.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X4676
This shelf support secures an interior refrigerator shelf in place so food items stay level and storage remains organized. It replaces a cracked or worn support to restore proper shelf seating and stability. What it does
- Holds a refrigerator shelf or shelf trim in the correct position to prevent sagging or tipping
- Restores stable support for glass or wire shelving that no longer stays seated
- Helps eliminate shelf movement that can cause items to slide or spill
- Works where a broken, chipped, or missing support prevents proper shelf alignment
What's included One shelf support Install notes
- Disconnect power to the appliance before starting any repair and empty the shelf area
- Remove the affected shelf or trim to access the support; reinstall shelf to confirm correct seating
- Use basic hand tools as needed and avoid forcing parts to prevent further damage
- Replace all affected pieces for consistent shelf alignment
More
Genuine Ge part
By: Ge
Part Number: WR2X8989
Genuine Ge part
By: Ge
Part Number: WR01X10064
Genuine Ge part
By: Ge
Part Number: WR01X10161
Genuine Ge part
By: Ge
Part Number: WR01X10204
Genuine Ge part
By: Ge
Part Number: WR02X10395
Do-It-Yourself Stories from Customers like You
Water valve and defrost drain tube were bad. Richard W. • Jacksonville , FL • June 24, 2017
Replaced them both.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR12X10037
Genuine Ge part
By: Ge
Part Number: WR12X10038