Kenmore Refrigerator 363.50232000 (36350232000, 363 50232000) Parts
Genuine Ge part
By: Ge
Part Number: WR40X1745
$18.95
- Compare At:
-
$25.19
- You Save:
-
$6.24
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR40X1746
$17.95
- Compare At:
-
$25.52
- You Save:
-
$7.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR71X10199
$47.23
- Compare At:
-
$54.40
- You Save:
-
$7.17
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR72X10036
$7.66
- Compare At:
-
$8.43
- You Save:
-
$0.77
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WZ6X136
$3.79
- Compare At:
-
$8.36
- You Save:
-
$4.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR24X527
Genuine Ge part
By: Ge
Part Number: WR2X8203
Do-It-Yourself Stories from Customers like You
The refrigertor compressor was making a loud noise when the unit was cycling off Nathaniel J. • Bossier City , LA • January 08, 2017
I ordered a clip retainer which hold the compressor in place. First, I discovered there are four clips and the one which I could easily move or turn by hand I ordered a replacement. The part came fast. In less than two minutes I had completed the repair.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X7491
The Riser Cam Shim is an OEM part for GE refrigerators. This part helps in aligning and leveling the refrigerator door, ensuring it opens and closes smoothly.
Causes of a bad riser cam shim can include regular wear and tear, damage from repeated door openings and closings, or deformation from improper installation.
Symptoms of a bad riser cam shim include:
- The refrigerator door not closing properly
- Difficulty in opening or closing the door
- The door appearing misaligned
- Reduced cooling efficiency due to an improper seal
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Door cam needing replacement and vegetable draw front broken Stephen M. • Norfolk , MA • March 22, 2015
Went online to youtube for videos. Could not find a video of draw front but figured it out.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR51X10031
Original GE Part. Kit includes defrost heater, wire harness, and defrost thermostat. Do not order def. thermostat in addition to this kit, unless you need a spare one.
Do-It-Yourself Stories from Customers like You
Frosting up and not cooling properly Ralph H. • Vancouver , WA • June 24, 2014
Replaced the defrost heater and thermostat. Removed the back panel in the freezer. Defrosted coils with a hair blow dryer. Removed defective unit and installed new replacement. Refer is back to normal operation. Took more time to defrost than to remove and install heating unit.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X4550
The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.
Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.
Symptoms of a malfunctioning Drive Cup include:
- The ice maker fails to eject ice properly, leading to clogs or jams within the system.
- Unusual noises during the ice-making cycle, which could indicate that the drive cup is not engaging correctly with other components.
- Decreased efficiency in ice production, as the mechanism struggles to operate smoothly.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
The problem was the auger was rusted and it came out on the ice Marie L. • Central Square , NY • August 04, 2017
Ordered new auger and installed it and now we have clean ice for our drinks.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X11561
Do-It-Yourself Stories from Customers like You
Ice maker stopped working. Jorge J. • Winter Garden , FL • April 05, 2019
Replaced Ice maker very easy.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X8663
The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.
You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.
Symptoms of a bad ice door spring may include:
- Difficulty in opening or closing the ice chute door
- Ice dispensing issues, such as the door not opening when the dispenser is activated
- Cold air leakage from the ice chute area
- Ice buildup on the front of the icemaker
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WZ4X244D
Do-It-Yourself Stories from Customers like You
Broken drawers Sarah P. • Bronx , NY • January 10, 2016
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3095
Color: Black.
Do-It-Yourself Stories from Customers like You
Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR30X257
This is the ice container only.
Do-It-Yourself Stories from Customers like You
Ice bucket was broken and 1 shelf was broken Charles M. • Quincy , IL • July 05, 2016
Drilled out the rivets on the rear of the bucket shelf on each side (needed an angle drive drill for the left side) and removed the front screws. Installed the new shelf both sides with original screws in the front and 8-32 bolts and nuts in the rear. 3 screws to install the bucket to the auger assembly.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X252
This left-hand drawer slide assembly mounts inside the refrigerator's fresh food section. It supports the shelf/cover and guides the drawer on its track, restoring smooth operation and proper alignment when the original rail is cracked or worn.
- Mounts on the left wall to support the shelf/cover and provide a smooth sliding track for the drawer
- Keeps the drawer aligned and level for easy in-and-out movement
- Replace when the existing rail is cracked, warped, or missing tabs
- Typical symptoms: drawer hard to open/close, pops off track, shelf tilts or sags, visible damage to the rail
What's included: One left-side slide assembly Install notes:
- Disconnect power and clear the compartment before starting
- Remove the affected drawer and its shelf/cover to access the slide
- Release locking tabs or remove mounting screws; transfer any reusable hardware to the new slide
- Test drawer travel before reloading
Do-It-Yourself Stories from Customers like You
My ice maker bin smelled like freezer burn and ice tasted like it too Nancy R. • New Paltz , NY • November 18, 2014
I bought whole new ice bin and it it's now the ice is great.
Read more
More