Kenmore Refrigerator 363.58077892 (36358077892, 363 58077892) Parts
Genuine Ge part
By: Ge
Part Number: WR2X4550
The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.
Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.
Symptoms of a malfunctioning Drive Cup include:
- The ice maker fails to eject ice properly, leading to clogs or jams within the system.
- Unusual noises during the ice-making cycle, which could indicate that the drive cup is not engaging correctly with other components.
- Decreased efficiency in ice production, as the mechanism struggles to operate smoothly.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
The problem was the auger was rusted and it came out on the ice Marie L. • Central Square , NY • August 04, 2017
Ordered new auger and installed it and now we have clean ice for our drinks.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X8663
The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.
You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.
Symptoms of a bad ice door spring may include:
- Difficulty in opening or closing the ice chute door
- Ice dispensing issues, such as the door not opening when the dispenser is activated
- Cold air leakage from the ice chute area
- Ice buildup on the front of the icemaker
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WZ4X244D
Do-It-Yourself Stories from Customers like You
Broken drawers Sarah P. • Bronx , NY • January 10, 2016
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3095
Color: Black.
Do-It-Yourself Stories from Customers like You
Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X1714
Do-It-Yourself Stories from Customers like You
Fan blade making noise. Stan B. • Savage , MN • October 09, 2018
Changed the washer behind fan blade and it quieted right down.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X210
This replacement part is a snack pan slide rail, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This part is able to hold up other trays and racks in the refrigerator and freezer so that extra shelf space can be utilized. These slide rails can also hold up trays that can support heavy bottles and drinks. A new snack pan slide rail might be needed if the current ones have become stripped and are unable to latch onto the shelving to support it. It is common that these parts can become brittle over time as exposure to low temperature wears down the plastic. Be sure the shelving of the appliance is clear before attempting to replace the slide rail. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of appliances made by General Electric.
Do-It-Yourself Stories from Customers like You
Shelf in refrigerator needed to be replaced Daniel S. • Jacksonville , NC • September 29, 2018
Ordered parts from appliance parts pros and completed installation myself
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3909
Lower fresh food section.
Do-It-Yourself Stories from Customers like You
Plastic shield light was warped from heat of light bulbs and would no longer stay in place on rear wall of refrigerator Paul S. • Green Valley , AZ • February 28, 2015
I needed to find a parts supplier who could provide a replacement part at a reasonable price. I first tried the manufacturer, General Electric, but they only showed freezer replacement parts for the model of my side-by-side refrigerator. In looking over a list of parts available for this model there seemed to be a possible part that sounded like a match but there was no picture to confirm that this was the correct replacement part. When i clicked the Appliance Parts Pros web site They had a...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X8933
Do-It-Yourself Stories from Customers like You
Clogged drain tube Keith P. • Ivoryton , CT • March 03, 2017
Swapped it out for new tube. Take 5 minutes and zero effort. The drain tube will clog with mold. You can clean it out but the tube will clog again despite's you best efforts as the tube wall provide a great habitat. Ordered new tubes to facilitate swap-outs. Old tubes can be cleaned but will recolonize quickly.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X211
Left side.
Do-It-Yourself Stories from Customers like You
Shelf in refrigerator needed to be replaced Daniel S. • Jacksonville , NC • September 29, 2018
Ordered parts from appliance parts pros and completed installation myself
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X2059
This replacement part is an ice dispenser deflector, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice dispenser deflectors are found inside of the ice-making assembly and are an important part of many freezers. The ice dispenser deflector allows the ice to come down from the tray into the dispensing area. A new ice dispenser deflector might be needed if the current one has become too brittle and has even cracked or broken. Be sure that the refrigerator is completely powered off before starting this repair. The user must have access to the ice maker assembly and will need common household tools like a screwdriver and pliers. The user might also need working gloves as some parts in and around the assembly have sharp edges or blades.Note that this part is sold individually. This ice dispenser deflector is sourced directly from the manufacturer and is a genuine OEM replacement part.
Do-It-Yourself Stories from Customers like You
The deflector broke John J. • Lexington , TN • April 22, 2014
Replaced the deflector
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3493
Genuine Ge part
By: Ge
Part Number: WR02X10100
Do-It-Yourself Stories from Customers like You
The fan was not working. Donald B. • Laurens , SC • December 17, 2022
I replaced the Evaporator Fan Motor the brackets were rusty so I ordered them.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR09X10002
Genuine Ge part
By: Ge
Part Number: WR17X2062
Plate for dispenser.
Do-It-Yourself Stories from Customers like You
Rust the plate and auger rusted badly Kenneth R. • Navarre , FL • December 14, 2014
Disassemble, replace, reassemble
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3670
Genuine Ge part
By: Ge
Part Number: WR29X5171
Do-It-Yourself Stories from Customers like You
Icemaker would not stop making ice Henry T. • Huntersville , NC • November 23, 2014
Determined from the schematic on the inside of the cover of the icemaker that the likely problem was the "stop" micro switch.... Took the whole thing apart and confirmed the switch was defective.
Replaced it with a standard DPDT switch - for a temporary fix. Went on line to find replacement. Bought it from APP Parts Pros. replaced DPDT switch with micro.. all is well.... saved at least $150 by not having a repair person come to the house - felling good about this.....
Read more
More