Kenmore Refrigerator 363.58262897 (36358262897, 363 58262897) Parts
Genuine Ge part
By: Ge
Part Number: WR1X1779
Replacement shelf support stud for refrigerator shelves. Installs to hold shelves in place. Needed when original stud is broken, cracked, or missing.
More
$4.31
- Compare At:
-
$8.36
- You Save:
-
$4.05
Genuine Ge part
By: Ge
Part Number: WR2X4143
Replacement pivot that supports and aligns refrigerator doors or drawers. Needed when original pivot is cracked, broken, or worn, causing misalignment.
Do-It-Yourself Stories from Customers like You
The ice maker did not crush ice Joy U. • Galveston , TX • October 02, 2016
When we inspected the first time we found that
Plactic had broken from the spiral part that for wards the ice. Also there were cracks in two places of other parts. There was a hole in the bottom of the bin. The new spiral was assembled and two new parts were replaced with help from the video and the diagram and the unit worked well. Two months later, ice maker would not forward any ice though the bin was full. We emptied the bin sand have ordered a new part or two in hopes that they will...
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WR01X10019
Mounting screw for refrigerator dispenser assembly. Secures dispenser components to door. Replace if stripped, missing, or damaged during repair work.
Do-It-Yourself Stories from Customers like You
We damaged our dispenser lever & shield when water service quit & line froze up Geoffrey B. • Hammond , OR • March 08, 2019
Replaced water line & both damaged dispenser parts.
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WR01X10600
Hex head mounting screw for refrigerator door hinges. Replace lost, stripped, or missing hardware when installing or reattaching refrigerator doors.
Do-It-Yourself Stories from Customers like You
Missing hardware for fridge doors Anita K. • Crossville , TN • July 03, 2015
We bought a used fridge and forgot to get the hardware to mount the doors. Looked up the model on your website. Using the pictures I was able to order just the parts I needed and not to duplicate anything (or leave anything out!). The parts arrived and because I watched the "how to" video I knew to use the "trick" to hold the doors up while attaching the hardware. Had the doors mounted in less than 15 minutes!.. Thanks
Read more
More
$7.37
- Compare At:
-
$8.00
- You Save:
-
$0.63
Genuine Ge part
By: Ge
Part Number: WR17X1361
Ice not dispensing or jamming? This ice dispenser auger blade moves ice from the bin to the chute. Installs in numbered sequence with spacers.
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Ge part
By: Ge
Part Number: WR17X2061
Replaces the outer housing that supports your refrigerator's ice crusher and dispenser chute. Order a new housing if yours is cracked or broken.
Do-It-Yourself Stories from Customers like You
Ice storage bin had problem dispensing James W. • Haltom City , TX • November 28, 2016
Replaced auger, crusher housing and end nut
Read more
More
$37.95
- Compare At:
-
$44.78
- You Save:
-
$6.83
Genuine Ge part
By: Ge
Part Number: WR1X1786
Replacement mounting screw for securing panels, trim, and internal components in appliances. Needed when original screws are stripped, lost, or damaged.
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WR1X1936
Secures water tube to cabinet, preventing kinks and flow issues. Replace if tube is loose, vibrating, or causing noise. Confirm fit with your model number.
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WR2X4140
Supports and centers the ice crusher blade assembly in your refrigerator. Replace if cracked, worn, or missing to prevent blade wobble and noise.
Do-It-Yourself Stories from Customers like You
Auger broken front bushing worn out on ice crusher Troy R. • Salem , OR • October 14, 2015
I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new.
Read more
More
$10.34
- Compare At:
-
$11.70
- You Save:
-
$1.36
Genuine Ge part
By: Ge
Part Number: WR2X9299
Closes and protects the end of your refrigerator's mullion air duct on the door jamb. Replace this cap if cracked, broken, or missing to maintain a finished appearance.
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WR30X30972
Ice maker not producing ice or won't dispense cubes? This complete ice maker assembly replaces failed units. DIY-friendly install in under 10 minutes.
Do-It-Yourself Stories from Customers like You
Ice maker would not exspell the ice after it was made. Leesinger K. • Jackson , WI • April 03, 2014
I found that the Ice Maker in my GE side by side made ice but would not kick out the ice when it had formed, the heating element or the switch that controls it didn't work. I ordered a new ice maker switched it out took less than 3 minutes. The cord was very stiff and just long enough but I got it to connect and in 35-40 minutes I had fresh ICE!!
Read more
More
$183.95
- Compare At:
-
$220.74
- You Save:
-
$36.79
Genuine Ge part
By: Ge
Part Number: WR86X25269
Filter drier for refrigerator sealed systems. Removes moisture and contaminants from refrigerant. Replace if frozen, iced over, cracked, or restricted.
More
$57.22
- Compare At:
-
$68.66
- You Save:
-
$11.44
Genuine Ge part
By: Ge
Part Number: WR2X8654
Mullion air duct that directs airflow between refrigerator compartments. Replace if cracked, broken, or missing to restore proper air circulation.
More
$2.95
- Compare At:
-
$4.35
- You Save:
-
$1.40
Genuine Ge part
By: Ge
Part Number: WR17X3089
Links the dispenser solenoid to the ice chute door in your refrigerator. Replace if the crank is broken, cracked, or worn, preventing proper closure.
Do-It-Yourself Stories from Customers like You
Ice build up on front of icemaker Brian H. • Mccalla , AL • August 06, 2016
REPLACED DISPENSER CRANK ARM, SPRING, FLAPPER FOR DISPENSER. THE REPAIR WAS VERY SIMPLE WITH NO PROBLEMS AT ALL.
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR01X10596
Top mounting screw for refrigerator door handles. Replace if missing, stripped, or damaged during handle replacement or appliance maintenance.
Do-It-Yourself Stories from Customers like You
Discolored handles Leland P. • Tampa , FL • June 17, 2016
This was a very easy repair. I watched the video from Appliance Parts Pro and then followed the same steps. I took my time and the only issue was that I had to flip the handles from the first installation so that the trim would fit better. The replacements look like they should be able to go either way, but they were definitely directional.
Read more
More
$6.39
- Compare At:
-
$8.36
- You Save:
-
$1.97
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR1X1366D
Pack of 12 washers for refrigerator ice crusher auger assembly. Replace worn, cracked, or missing washers during ice maker repairs and maintenance.
Do-It-Yourself Stories from Customers like You
A fin on the plastic auger broke off and needed to be replaced John M. • Massanutten , VA • August 08, 2015
I ordered a replacement auger from AppliancePartsPros.com. Upon receipt of the new auger, I watched the repair video and took the ice crusher apart. I found several other parts that needed to be replaced as well. Once All the parts were received, I again watched the video. The video was not specific enough to show how to reassemble the ice crusher blades and the two types of washers. I found another video on YouTube that walked me through specific details of assembly and everything went...
Read more
More
$30.95
- Compare At:
-
$36.83
- You Save:
-
$5.88
Out Of Stock
Usually ships within 4 - 14 days