Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kenmore Refrigerator 363.58892894 (36358892894, 363 58892894) Parts

Refrigerator Water Tank Dispenser Reservoir
Genuine Ge part
By: Ge
Part Number: WR17X4358

Internal water storage reservoir for refrigerator dispensers. Installs inside the fresh food compartment. Replace if cracked, leaking, or split.

Do-It-Yourself Stories from Customers like You Nasty water tank for fridge dispenser   Prather, T. • Minden , NV • September 22, 2014

This part was easy to install by following the directions from other users here. As long as you get the right hoses connected in the right places, everything else was straight forward. Takes a few minutes for the tank to initially fill and pressurize and clear the air in the line and then you're on your way to clean fresh water! Read more

More
$122.48
Compare At:
$146.98
You Save:
$24.50

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Solenoid Saddle (Mounting Bracket)
Genuine Ge part
By: Ge
Part Number: WR2X7309

This solenoid saddle is a small mounting bracket that secures a refrigerator solenoid in the correct position. By preventing movement and misalignment, it helps the linked mechanism engage smoothly and consistently.

  • Secures the solenoid to its housing or frame to prevent shifting
  • Maintains proper alignment for reliable actuation
  • A worn or broken saddle can cause buzzing/chattering and intermittent operation
  • Restores stable mounting to help the connected mechanism work correctly
What's included: 1 solenoid saddle Install notes:
  • Disconnect power; shut off water supply if working near water lines
  • Access the solenoid assembly and note the original saddle's orientation
  • Transfer the solenoid into the new saddle and reuse existing fasteners/clips
  • Smooth operation before reassembling panels

Do-It-Yourself Stories from Customers like You Ice dispenser crushing ice only no cubes   Eric W. • Copper Canyon , TX • June 27, 2014

Easy fix once I found the problem. Broken solenoid sleeve. Part cost $2.58 + shipping. 10 minute repair. Read more

More
$7.95
Compare At:
$9.46
You Save:
$1.51

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Ice Crusher Helix
Genuine Ge part
By: Ge
Part Number: WR17X4207

Ice crusher not working or slow crushed ice production? This helix front feeds ice to crushing blades. Moderate DIY repair—replace with auger for best results.

Do-It-Yourself Stories from Customers like You Ice crusher repair GE Monogram counter depth.   Glenn J. • El Cajon , CA • July 27, 2020

This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful. The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger). Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost). The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot. Read more

More
$51.62
Compare At:
$61.43
You Save:
$9.81

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer (12-Pack)
Genuine Ge part
By: Ge
Part Number: WR1X1366D

Includes 12 washers.

Do-It-Yourself Stories from Customers like You A fin on the plastic auger broke off and needed to be replaced   John M. • Massanutten , VA • August 08, 2015

I ordered a replacement auger from AppliancePartsPros.com. Upon receipt of the new auger, I watched the repair video and took the ice crusher apart. I found several other parts that needed to be replaced as well. Once All the parts were received, I again watched the video. The video was not specific enough to show how to reassemble the ice crusher blades and the two types of washers. I found another video on YouTube that walked me through specific details of assembly and everything went... Read more

More
$32.95
Compare At:
$39.21
You Save:
$6.26

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Upper Crisper Drawer Pan
Genuine Ge part
By: Ge
Part Number: WR32X1492

Upper vegetable crisper drawer pan for refrigerators. Replaces cracked, broken, or missing drawer liners. Restores produce storage in upper location.

Do-It-Yourself Stories from Customers like You Refrigerator is 25 years (ge hotpoint) old but still works great crisper drawers were broke and would not open   Ed R. • Mason , OH • January 20, 2020

Ordered top and bottom drawers and right and left side rails. Hardest thing was getting out the broken drawers on out took me 15 minutes to re install the new hardware. Read more

More
$138.38
Compare At:
$164.67
You Save:
$26.29

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Wire Harness Assembly
Genuine Ge part
By: Ge
Part Number: WR23X10108

Wire harness assembly that routes electrical connections between refrigerator components. Replace if wires are damaged, frayed, broken, or corroded.

Do-It-Yourself Stories from Customers like You Leaking water dispenser in door   Todd S. • East Brunswick , NJ • December 19, 2015

Replaced water valve Read more

More
$50.95
Compare At:
$60.12
You Save:
$9.17

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Ice Crusher Blade
Genuine Ge part
By: Ge
Part Number: WR17X1363

Ice won't crush and gets stuck between blades? This moving dispenser blade restores crushing function. Simple DIY fix for side-by-side refrigerators.

More
$10.64
Compare At:
$12.24
You Save:
$1.60

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Ice Crusher Dispenser Housing
Genuine Ge part
By: Ge
Part Number: WR17X2061

Replaces the outer housing that supports your refrigerator's ice crusher and dispenser chute. Order a new housing if yours is cracked or broken.

Do-It-Yourself Stories from Customers like You Ice storage bin had problem dispensing   James W. • Haltom City , TX • November 28, 2016

Replaced auger, crusher housing and end nut Read more

More
$37.95
Compare At:
$44.78
You Save:
$6.83

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Shelf Support Stud
Genuine Ge part
By: Ge
Part Number: WR1X1779

Replacement shelf support stud for refrigerator shelves. Installs to hold shelves in place. Needed when original stud is broken, cracked, or missing.

More
$5.15
Compare At:
$8.36
You Save:
$3.21

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WZ2X464D

Package of 12

More
$27.95
Compare At:
$32.98
You Save:
$5.03

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Terminal Block Kit
Genuine Ge part
By: Ge
Part Number: WB17X5060

 

More
$54.25
Compare At:
$64.56
You Save:
$10.31

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw - Pkg 12
Genuine Ge part
By: Ge
Part Number: WD2X323D

 

More
$29.95
Compare At:
$35.34
You Save:
$5.39

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WE02X10011

8 - 18 x .375

More
$14.95
Compare At:
$17.79
You Save:
$2.84

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WH2X940

Size: 8-32 TT FL 1/2 S.

More
$4.40
Compare At:
$8.69
You Save:
$4.29

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw 10-24 X 1.0 In (Threaded Fastener)
Genuine Ge part
By: Ge
Part Number: WR01X10601

This is a 10-24 x 1.0 inch screw used to secure appliance panels and components. It replaces worn or missing fasteners to restore proper fit and reduce rattling or loose parts for safer, quieter operation. What it does:

  • Secures panels, brackets, and trim to keep components aligned and stable
  • Stops vibrating or rattling caused by loose or missing screws
  • Restores proper grounding/attachment where a threaded fastener is required
  • Matches OEM thread size and length for a correct fit when replacing damaged screws
What's included: One 10-24 x 1.0 in screw Install notes:
  • Use the correct driver bit and turn carefully to avoid stripping the head or threads
  • Do not overtighten; snug until secure to prevent damage to mating parts
  • Replace like-for-like with the same thread size and length for proper fit
  • Disconnect power and follow appliance safety guidelines before accessing internal components

More
$4.57
Compare At:
$8.36
You Save:
$3.79

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Trigger Cmk Door
Genuine Ge part
By: Ge
Part Number: WR02X10033

 

Do-It-Yourself Stories from Customers like You The plastic latch and cap of the entertainment door was broken and would not stay closed   Robert H. • York , SC • December 31, 2016

I found the appropriate parts on the appliancepartspros.com website and placed the order. I recieved an email informing me that the parts were on back order with an expected ship date by the manufacturer. It took a while for the part to arrive, but well worth the wait. We had been keeping the door closed with a wedge, and the fix was very easy and the parts were exactly what was needed. Now the door works like new and we aren't looking at a broken door cap. Very satisfied, especially with... Read more

More
$11.95
Compare At:
$14.22
You Save:
$2.27

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store