Kenmore Refrigerator 363.59527994 (36359527994, 363 59527994) Parts

Genuine Ge part

Slide Assembly Right

By: Ge

Part Number: WR72X253

Do-It-Yourself Stories from Customers like You Slide assembly left and right both were broken. Robert L. • Daytona Beach , FL • November 12, 2017

Ordered the parts and in a couple of days they arrived. A simple Philips screw driver was all that was needed to complete the install. Very simple, not complicated. You don't need to order the slide bushings as the slide assy. has them installed from the factory. Appliance Parts Pros is the best!!! terry,florida Read more

Genuine Ge part

Ring Compression

4.5 (2)

By: Ge

Part Number: WR02X10323

Do-It-Yourself Stories from Customers like You Refrigerator and freezer not cooling. Eric O. • Long Beach , CA • August 07, 2017

This is in a 15 year old Built-in Monogram that had the compressor replaced a few years ago. Before discovering the motor failure I replaced the main board since a Refrigeration Contractor I know said that if it wasn't bad it would be soon since those parts typically only last around eight years. The motor replacement is pretty simple; more time is spent getting to the motor and re-assembling everything than actually changing the motor. The trickiest part is getting the fan set correctly on... Read more

Genuine Ge part

Overload

4.8 (4)

By: Ge

Part Number: WR08X10006

Do-It-Yourself Stories from Customers like You Refrigerator not getting cold at all and everything thawing out compressor clicking Victor F. • West Milford , NJ • June 15, 2015

I researched the problem and determined that the only thing that can cause this was compressor bad or not starting. Since it was cold the day before I felt it had to be the starter parts and ordered them. It was also very important to clean the coil which I believe caused the over heating. Read more

Genuine Ge part

Ice Dispenser Deflector

5.0 (3)

By: Ge

Part Number: WR17X2059

This replacement part is an ice dispenser deflector, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice dispenser deflectors are found inside of the ice-making assembly and are an important part of many freezers. The ice dispenser deflector allows the ice to come down from the tray into the dispensing area. A new ice dispenser deflector might be needed if the current one has become too brittle and has even cracked or broken. Be sure that the refrigerator is completely powered off before starting this repair. The user must have access to the ice maker assembly and will need common household tools like a screwdriver and pliers. The user might also need working gloves as some parts in and around the assembly have sharp edges or blades.Note that this part is sold individually. This ice dispenser deflector is sourced directly from the manufacturer and is a genuine OEM replacement part.

Do-It-Yourself Stories from Customers like You The deflector broke John J. • Lexington , TN • April 22, 2014

Replaced the deflector Read more

Genuine Ge part

Pan Slide

5.0 (6)

By: Ge

Part Number: WR72X211

Left side.

Do-It-Yourself Stories from Customers like You Shelf in refrigerator needed to be replaced Daniel S. • Jacksonville , NC • September 29, 2018

Ordered parts from appliance parts pros and completed installation myself Read more

Genuine Ge part

Grom/Tube Assembly

By: Ge

Part Number: WR17X3670

Genuine Ge part

Light Shield

5.0 (3)

By: Ge

Part Number: WR17X3909

Lower fresh food section.

Do-It-Yourself Stories from Customers like You Plastic shield light was warped from heat of light bulbs and would no longer stay in place on rear wall of refrigerator Paul S. • Green Valley , AZ • February 28, 2015

I needed to find a parts supplier who could provide a replacement part at a reasonable price. I first tried the manufacturer, General Electric, but they only showed freezer replacement parts for the model of my side-by-side refrigerator. In looking over a list of parts available for this model there seemed to be a possible part that sounded like a match but there was no picture to confirm that this was the correct replacement part. When i clicked the Appliance Parts Pros web site They had a... Read more

Genuine Ge part

Bracket Evaporator Fan Sm.

5.0 (2)

By: Ge

Part Number: WR02X10100

Do-It-Yourself Stories from Customers like You The fan was not working. Donald B. • Laurens , SC • December 17, 2022

I replaced the Evaporator Fan Motor the brackets were rusty so I ordered them. Read more

Genuine Ge part

Cradle Actuator

By: Ge

Part Number: WR17X3493

Genuine Ge part

Fill Cup

By: Ge

Part Number: WR29X10063

Genuine Ge part

Shelf Support (Single)

By: Ge

Part Number: WR2X4676

This shelf support secures an interior refrigerator shelf in place so food items stay level and storage remains organized. It replaces a cracked or worn support to restore proper shelf seating and stability. What it does

Holds a refrigerator shelf or shelf trim in the correct position to prevent sagging or tipping
Restores stable support for glass or wire shelving that no longer stays seated
Helps eliminate shelf movement that can cause items to slide or spill
Works where a broken, chipped, or missing support prevents proper shelf alignment

What's included One shelf support Install notes

Disconnect power to the appliance before starting any repair and empty the shelf area
Remove the affected shelf or trim to access the support; reinstall shelf to confirm correct seating
Use basic hand tools as needed and avoid forcing parts to prevent further damage
Replace all affected pieces for consistent shelf alignment

Genuine Ge part

Ice Auger Blade

5.0 (2)

By: Ge

Part Number: WR2X7783

This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.

Do-It-Yourself Stories from Customers like You Ice crusher repair GE Monogram counter depth. Glenn J. • El Cajon , CA • July 27, 2020

This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful. The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger). Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost). The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot. Read more