Kenmore Refrigerator 363.68437894 (36368437894, 363 68437894) Parts
Genuine Ge part
By: Ge
Part Number: WR2X8248
Insulation foam that protects electrical components in your top-mount refrigerator. Replace if cracked, deteriorated, or missing to maintain proper coverage.
More
$36.95
- Compare At:
-
$43.97
- You Save:
-
$7.02
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR2X8708
Replace the right-hand mounting gusset bracket in your top-mount refrigerator. Needed when the original bracket is cracked, broken, or missing.
More
$9.19
- Compare At:
-
$15.71
- You Save:
-
$6.52
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR2X8709
Left-hand support gusset plate for top-mount refrigerators. Replaces cracked, broken, or missing structural brackets that secure internal components.
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: 31-5036
$11.59
- Compare At:
-
$16.16
- You Save:
-
$4.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR04X10011
Small replacement clip that secures the appliance nameplate or trim piece to the cabinet so the nameplate stays aligned and flush. Restores a finished appearance and prevents the badge from falling loose. What it does:
- Secures the refrigerator/freezer nameplate or trim to the cabinet or door
- Keeps the nameplate aligned and flush with the surface
- Replaces broken, bent or missing clips that allow the nameplate to droop or come off
- Helps eliminate rattling or vibration at the nameplate area
What's included: One nameplate clip (quantity: 1) Install notes:
- Disconnect power or unplug the appliance before starting work
- Typically installs by snapping into a designated slot; a small flat screwdriver or trim tool may help with removal and installation
- Inspect surrounding trim for damage and replace additional fasteners if needed
More
$10.50
- Compare At:
-
$13.57
- You Save:
-
$3.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR12X10025
$7.60
- Compare At:
-
$8.36
- You Save:
-
$0.76
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR17X3188
Rear rail support plate for refrigerators. Mounts inside the cabinet to support shelving rails. Replace if cracked, broken, or missing for stability.
More
$23.46
- Compare At:
-
$40.85
- You Save:
-
$17.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR1X1716
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR2X7928
$24.95
- Compare At:
-
$25.52
- You Save:
-
$0.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR2X8466
$16.38
- Compare At:
-
$21.95
- You Save:
-
$5.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR2X9000
Secures the condenser unit in your refrigerator. Replace if loose, broken, or causing vibration noise. Verify fit with your model number before ordering.
More
$11.50
- Compare At:
-
$13.57
- You Save:
-
$2.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR14X313
Genuine Ge part
By: Ge
Part Number: WR82X10111
The GE access cover is an OEM replacement part responsible for covering the compressor area on a refrigerator. This panel is located on the rear or bottom of the refrigerator and provides easy access to the compressor and condenser coils and prevents dirt and debris from entering the compressor area. When this part becomes damaged, it can lead to issues such as poor cooling performance, excessive noise from the compressor area, or even compressor overheating.
Symptoms of a bad access cover include:
- Visible cracks, breaks, or deformation in the cover
- Difficulty in securing the cover properly in place
- Increased dust or debris buildup inside the refrigerator
- Exposed internal components
Causes of a bad access cover can include accidental impacts, wear and tear from frequent removal and reinstallation, and environmental factors like temperature fluctuations or moisture exposure.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The old access cover was damaged Michael W. • Factoryville , PA • January 21, 2022
I removed the damaged cover and replaced with the new cover. I knew what to expect as your website had a video showing how to make the repair.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X7391
The Fan Blade Grommet is an OEM replacement part for GE brand refrigerators. Located behind the evaporator fan blade where its central shaft passes through, this rubber sealing piece creates a protective barrier isolating the fan assembly.
Causes of a potentially problematic fan blade grommet include cracks or deterioration that develop from continuous vibration and impacts over extended use. Exposure to temperature fluctuations can also cause the rubber to harden and lose elasticity.
Symptoms of a faulty fan blade grommet include:
- Airflow obstructions within the duct
- Noisy vibrations from the fan assembly
- Rubber debris collecting on components
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore model refrigerators.
Do-It-Yourself Stories from Customers like You
Fan chatter. Steven G. • Newtown , CT • August 17, 2018
Remove and replace motor and fan. As expected problem solved.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR60X203
The Evaporator Motor is an OEM part for GE refrigerators. This air circulation is essential for maintaining the set temperature within the refrigerator and freezer compartments, ensuring your food stays fresh and frozen items remain solid.
Causes of a bad Evaporator Motor can range from wear and tear over time, which can degrade the motor's components, to electrical issues like short circuits or failed bearings, which can impede the motor's ability to function properly.
Symptoms of a malfunctioning Evaporator Motor include:
- The refrigerator or freezer not cooling adequately
- Unusual noises coming from the refrigerator, indicating the motor may be struggling or has failed
- Frost build-up on the evaporator coils due to insufficient air circulation
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrig not getting cold Joseph C. • Eastnorthport , NY • April 15, 2016
Replace evaporator motor it work now. Thank you .
Read more
More
Genuine Ge part
By: Ge
Part Number: WZ4X244D
Do-It-Yourself Stories from Customers like You
Broken drawers Sarah P. • Bronx , NY • January 10, 2016
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward.
Read more
More