Kenmore Refrigerator 363.78477896 (36378477896, 363 78477896) Parts
Genuine Ge part
By: Ge
Part Number: WR17X2783
$32.51
- Compare At:
-
$36.64
- You Save:
-
$4.13
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR17X3934
$51.95
- Compare At:
-
$54.58
- You Save:
-
$2.63
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR1X1360
Mounting clip for refrigerators. Secures components and panels in place. Replace if clip is broken, cracked, or missing to restore proper fitment.
More
$8.12
- Compare At:
-
$8.36
- You Save:
-
$0.24
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR2X7069
Plastic plug button insert for refrigerator shelves and interior panels. Replaces missing, cracked, or broken plug inserts that leave exposed holes.
More
$5.86
- Compare At:
-
$6.45
- You Save:
-
$0.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR2X7657
Corner cap for refrigerator exterior trim. Replaces cracked, broken, or missing caps on cabinet corners. Restores finished appearance and protects edges.
More
$16.32
- Compare At:
-
$22.05
- You Save:
-
$5.73
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR2X9209
$8.77
- Compare At:
-
$9.65
- You Save:
-
$0.88
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR38X10042
$14.83
- Compare At:
-
$19.38
- You Save:
-
$4.55
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR38X10045
$22.68
- Compare At:
-
$28.10
- You Save:
-
$5.42
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR38X10050
This bright finish trim piece restores the clean, finished look along a refrigerator opening. It hides exposed edges and provides a finished appearance so doors and panels align neatly with surrounding surfaces. What it does:
- Covers and protects exposed cabinet or door edges for a finished cosmetic appearance
- Helps maintain consistent panel alignment and visual gap around the door opening
- Replaces cracked, chipped or missing trim that detracts from the appliance's appearance
- Fits where a bright-finish decorative edge is required
What's included: One bright trim piece. Install notes:
- Disconnect power or unplug the appliance before any service for safety.
- Trim typically snaps or slides into place; remove surrounding screws or fasteners if applicable.
- Handle carefully to avoid scratching the finish during installation.
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR84X10011
$294.95
- Compare At:
-
$324.33
- You Save:
-
$29.38
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR60X30349
The Evaporator Fan Motor Kit is an OEM part compatible with GE refrigerators. It is a critical component responsible for circulating air and maintaining proper airflow within the refrigerator's evaporator system, ensuring efficient cooling and temperature regulation. It features a shaft that measures 3/8 of an inch and two right-side terminals. Notably, the motor no longer comes with harness wires, which must be obtained separately for installation.
Symptoms of a faulty evaporator fan motor include:
- Inconsistent or inadequate cooling in the refrigerator or freezer compartments
- Warm spots or temperature fluctuations within the refrigerator
- Excessive frost buildup or ice accumulation in the freezer
Causes of a bad evaporator fan motor can include wear and tear over time, electrical issues or short circuits, or physical damage from foreign objects or improper maintenance.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
The refrigerator would not cool nor freeze! Tom C. • Kenmore , WA • October 31, 2015
I called AppliancePartsPros.com and they helped me diagnose the problem for this very nice, and well designed refrigerator, that I wanted to keep rather than recycle at the local scrap yard. It turns out that all it needed was a small electric fan (i.e., evaporator fan) to circulate the air from the freezer coils throughout the refrigerator [all other major components were good]. It was really easy to locate the motor and fan and replace it. I saved hundreds of $$$. I really appreciated the...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X8474
Rubber grommet seals the ice maker fill tube where it enters the refrigerator cabinet. Replace if cracked, brittle, leaking, or missing to restore seal.
This part fixes the following symptoms
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Had a cracked plastic ice maker inlet water tube that flooded part of kitchen floor Terry C. • Durham , NC • February 16, 2019
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X7391
The Fan Blade Grommet is an OEM replacement part for GE brand refrigerators. Located behind the evaporator fan blade where its central shaft passes through, this rubber sealing piece creates a protective barrier isolating the fan assembly.
Causes of a potentially problematic fan blade grommet include cracks or deterioration that develop from continuous vibration and impacts over extended use. Exposure to temperature fluctuations can also cause the rubber to harden and lose elasticity.
Symptoms of a faulty fan blade grommet include:
- Airflow obstructions within the duct
- Noisy vibrations from the fan assembly
- Rubber debris collecting on components
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore model refrigerators.
Do-It-Yourself Stories from Customers like You
I had a very noisy evaporator fan in older GE refrigerator top freezer Richard B. • Casa Grande , AZ • December 06, 2019
Replaced the evaporator fan motor, fan blade, and two rubber grommets. I was careful to mark screws and bolts with sticky notes to ensure getting them back in the right place. I had all the new parts ready before I started the job because I did not have an extra freezer for my food and I wanted to do this quickly and only once. New parts went in well, Took a while to install the ring for the new fan blade using my long nose pliers. I would have saved time if I had the special ring spreader...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR24X438
Do-It-Yourself Stories from Customers like You
The gaskets was allowing air to leak out of the freezer Polly A. • Houston , MO • December 05, 2020
I ordered 2 new gaskets, one for the freezer and another for the refrigerator. These arrived within a few days. I soaked both in the bathtub filled with hot water for about 20 minutes. My grandson installed both gaskets without any trouble. I duck taped on the freezer door to allow it to
'seep' with the cold air inside the freezer unit as I was told this would help make a better seal.
I waited 48 hours before removing the tape and opening the door. So far, I'm very happy with my 'new'...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10604
Do-It-Yourself Stories from Customers like You
GE refrigerator front and rear wheels. The rubber shell on the wheels had cracked and peeled off. Carl C. • London , OH • August 18, 2023
The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish.
The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out.
1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it.
2. The new axle I drilled a 2mm hole thru the...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X9295
Left side. Color: white. It measures about 4 inches high by 3 inches deep.
Do-It-Yourself Stories from Customers like You
A door shelf end cap broke on my ge fridge Brett W. • Grand Rapids , MI • November 28, 2015
I entered my fridge model number on ApplianceParts.com website and was able to easily find the part I needed from the parts drawing. Received my replacement part in 2 days.
Read more
More