Kenmore Refrigerator 363.9537720 (3639537720, 363 9537720) Parts

Ordered new auger and installed it and now we have clean ice for our drinks. Read more

I removed ice maker, cleared out frozen food to make room for drill, removed broken support, & drilled out old pop rivet (covering the area below with a cloth to catch the metal shavings). Then I carefully straightened the metal support, loosely installed the new support, and pop-riveted it onto the support using the same size rivet. I reinstalled the ice maker, replaced the frozen food, and turned the ice maker back on. No issues. Read more

I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new. Read more

New switch for water dispenser and new inlet valve. Read more

I loosened all bracket screws around door inside edge. I removed the old seal and replace it with the new seal. The most difficult part was adjusting the seal properly. This required loosening the screws two or three at a time and pulling the rubber seal outwards from under the bracket. The seal was wrinkled coming out of the cardboard package. I followed the instructions dipping the seal in hot water and this relaxed the rubber removing the kinks. Read more

Determined from the schematic on the inside of the cover of the icemaker that the likely problem was the "stop" micro switch.... Took the whole thing apart and confirmed the switch was defective. Replaced it with a standard DPDT switch - for a temporary fix. Went on line to find replacement. Bought it from APP Parts Pros. replaced DPDT switch with micro.. all is well.... saved at least $150 by not having a repair person come to the house - felling good about this..... Read more