Kenmore Refrigerator 363.9557822 (3639557822, 363 9557822) Parts

Genuine Ge part

Shield Fan

By: Ge

Part Number: WR17X2905

Genuine Ge part

Grille Recess Bk

5.0 (1)

By: Ge

Part Number: WR17X3366

Do-It-Yourself Stories from Customers like You Broken ice bucket broken cover bucket broken grille recess Cesar B. • Albuquerue , NM • August 09, 2016

I ordered my parts on the phone to make sure I had what I needed, it took me 15 minutes to make sure what I had to do to finish the process....Thank you !!!! Read more

Genuine Ge part

Dispenser Auger

4.8 (12)

By: Ge

Part Number: WR17X4341

Do-It-Yourself Stories from Customers like You First thing i saw was that the ice cubes were coming out with rust although we need iron i prefer a pill Mike E. • El Paso , TX • July 22, 2015

I took the ice bucket out and saw the Plate and the Auger were rusted out I thought about cleaning it but I figured that the rust prevent coating was probability all gone I've had this refrigerator since 98 , so I figured the best way was to buy the replacement parts . the price was pretty good so I went that route , the taking apart was very easy , its the putting back together that takes time , however I took a video of the bucket before I took it apart and the on-line video that... Read more

Genuine Ge part

Nut

By: Ge

Part Number: WR1X1515

Genuine Ge part

Refrigerator J-Nut Kit (12-Pack)

5.0 (1)

By: Ge

Part Number: WR1X1547D

The J-nut kit contains multiple threaded fasteners used to secure various internal refrigerator components and shelving systems. Located throughout the refrigerator interior at mounting points, these nuts should be replaced when shelves become loose, components rattle, or existing nuts are stripped or corroded.

Do-It-Yourself Stories from Customers like You Broken ice maker supporters Frank G. • Colorado Springs , CO • December 21, 2014

I removed ice maker, cleared out frozen food to make room for drill, removed broken support, & drilled out old pop rivet (covering the area below with a cloth to catch the metal shavings). Then I carefully straightened the metal support, loosely installed the new support, and pop-riveted it onto the support using the same size rivet. I reinstalled the ice maker, replaced the frozen food, and turned the ice maker back on. No issues. Read more

Genuine Ge part

Auger Front Nut

5.0 (2)

By: Ge

Part Number: WR1X1585

Do-It-Yourself Stories from Customers like You Auger broken front bushing worn out on ice crusher Troy R. • Salem , OR • October 14, 2015

I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new. Read more

Genuine Ge part

Clamp

By: Ge

Part Number: WR1X1843

Genuine Ge part

Screw

By: Ge

Part Number: WR1X2078

Genuine Ge part

Slide Pan Front

By: Ge

Part Number: WR1X2079

Genuine Ge part

Basket Clear

By: Ge

Part Number: WR21X190

Genuine Ge part

Sensor Door

By: Ge

Part Number: WR23X10021

Genuine Ge part

Sensor Door Assembly Freezer Bk

5.0 (1)

By: Ge

Part Number: WR23X10022

Do-It-Yourself Stories from Customers like You Sensor door assembly broke George F. • Concord , NC • February 27, 2015

I JUST TOOK THE PLUG APART AND PLUG THE NEW ONE UP AND PUSH THE NEW ONE BACK IN PLACE. IT WAS DONE. Read more

Genuine Ge part

Dispenser Switch

4.0 (1)

By: Ge

Part Number: WR23X366

Do-It-Yourself Stories from Customers like You Random leak from water dispenser. Fred F. • Hazelhurst , WI • June 19, 2018

New switch for water dispenser and new inlet valve. Read more

Genuine Ge part

Door Gasket

4.0 (1)

By: Ge

Part Number: WR24X526

Do-It-Yourself Stories from Customers like You Refrigerator door seal was leaking Regan O. • Las Vegas , NV • March 18, 2016

I loosened all bracket screws around door inside edge. I removed the old seal and replace it with the new seal. The most difficult part was adjusting the seal properly. This required loosening the screws two or three at a time and pulling the rubber seal outwards from under the bracket. The seal was wrinkled coming out of the cardboard package. I followed the instructions dipping the seal in hot water and this relaxed the rubber removing the kinks. Read more