Kenmore Refrigerator 363.9564720 (3639564720, 363 9564720) Parts
Genuine Ge part
By: Ge
Part Number: WR17X10514
Genuine Ge part
By: Ge
Part Number: WR17X2062
Plate for dispenser.
Do-It-Yourself Stories from Customers like You
Rust the plate and auger rusted badly Kenneth R. • Navarre , FL • December 14, 2014
Disassemble, replace, reassemble
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3139
Genuine Ge part
By: Ge
Part Number: WR17X3166
Genuine Ge part
By: Ge
Part Number: WR17X3210
Genuine Ge part
By: Ge
Part Number: WR17X3366
Do-It-Yourself Stories from Customers like You
Broken ice bucket broken cover bucket broken grille recess Cesar B. • Albuquerue , NM • August 09, 2016
I ordered my parts on the phone to make sure I had what I needed, it took me 15 minutes to make sure what I had to do to finish the process....Thank you !!!!
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3838
Genuine Ge part
By: Ge
Part Number: WR17X4204
Do-It-Yourself Stories from Customers like You
Dripping ice maker rusty parts and poorly operating dispenser Don W. • Fulshear , TX • February 03, 2018
I fixed the drip with a bit of silicone. I fixed the rusty parts Auger & End Plate by replacing them. I repaired the dispenser by replacing the defective door.
I used the various videos connected with the parts ( including related parts that I did not replace but required removing them first) to learn and confirm how to properly remove and replace the parts. These were incredibly valuable, Thank You!
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X1515
Genuine Ge part
By: Ge
Part Number: WR1X1547D
Includes 12 clips.
Do-It-Yourself Stories from Customers like You
Broken ice maker supporters Frank G. • Colorado Springs , CO • December 21, 2014
I removed ice maker, cleared out frozen food to make room for drill, removed broken support, & drilled out old pop rivet (covering the area below with a cloth to catch the metal shavings).
Then I carefully straightened the metal support, loosely installed the new support, and pop-riveted it onto the support using the same size rivet.
I reinstalled the ice maker, replaced the frozen food, and turned the ice maker back on. No issues.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X1585
Do-It-Yourself Stories from Customers like You
Auger broken front bushing worn out on ice crusher Troy R. • Salem , OR • October 14, 2015
I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X2019
Genuine Ge part
By: Ge
Part Number: WR1X2041
Genuine Ge part
By: Ge
Part Number: WR1X2079
Genuine Ge part
By: Ge
Part Number: WR22X524
Genuine Ge part
By: Ge
Part Number: WR23X10147
Do-It-Yourself Stories from Customers like You
Light was intermittently working then stopped Pete A. • Cranford , NJ • July 26, 2016
Watched the video to replace it, did pretty much the same thing (switch was a little tough to pry out without damaging the fridge). Once old one was out, new one was installed in about 30 seconds.
Read more
More