Kenmore Washer Dryer Combo 417.99190820 (41799190820, 417 99190820) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281020
For a complete drum bearing and shaft kit order 5303281153.
Do-It-Yourself Stories from Customers like You
Dryer drum would not turn J Kent I. • Anderson , IN • February 22, 2019
I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros.
Read more
More
$12.95
- Compare At:
-
$15.28
- You Save:
-
$2.33
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302800
This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.
- Fastens the drum baffle/lifter (vane) to the rotating drum
- Helps maintain proper tumble and load turnover
- Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
- Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes
What's included: One screw
- Disconnect power before servicing; shut off gas
- Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
- Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
- Start all screws before final tightening to seat the baffle evenly
Do-It-Yourself Stories from Customers like You
The pump hose had a tear in it and the water hoses were in bad shape Steven V. • El Cerrito , CA • September 21, 2014
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303321319
The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.
The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.
Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.
Symptoms of needing Touch Up Paint include:
- Visible scratches or chips on the appliance's surface.
- Areas of rust or corrosion that need to be covered after treating the rust.
- The desire to maintain or improve the appliance's appearance for aesthetic reasons or to maintain its value.
Do-It-Yourself Stories from Customers like You
Small chip in the frigereator Julia J. • Maple Grove , MN • October 03, 2015
Quick touch up. The paint worked great. Packaged with a brush like nail poliish
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Frigidaire part
By: Frigidaire
Part Number: 137107000
Secures the washer's inner basket to the drive hub, keeping the tub centered and stable during spin. Replace if cracked, corroded, or bolts are damaged.
Do-It-Yourself Stories from Customers like You
Leaking washer tub Hugh S. • Miami , FL • June 25, 2016
The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off...
Read more
More
$20.33
- Compare At:
-
$24.19
- You Save:
-
$3.86
Genuine Frigidaire part
By: Frigidaire
Part Number: 137539500
This replacement bolt secures internal components in your appliance. A stripped, rusted, or missing bolt can let parts loosen and vibrate; installing a new bolt restores a tight, stable connection for reliable operation.
- Provides a secure, threaded fastener for brackets, weights, or assemblies
- Helps maintain alignment and reduce movement during operation
- Typical issues: missing hardware, stripped threads, or visible corrosion
- Helps address rattling or excessive vibration caused by loose hardware
What's included: 1 bolt
- Safety first: Disconnect power; for water- or gas-connected units, shut off supplies
- Support the component being secured before removing the old fastener
- Start threads by hand to avoid cross-threading; tighten evenly to manufacturer guidance—do not overtighten
- Reuse original washers/spacers and thread locker only if they were originally present
Do-It-Yourself Stories from Customers like You
Leaking washer tub Hugh S. • Miami , FL • June 25, 2016
The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off...
Read more
More
$14.95
- Compare At:
-
$17.94
- You Save:
-
$2.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 131901400
Seals between the outer tub and splash guard to prevent leaks during wash and spin cycles. Replace if water leaks from the top of the cabinet. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
Water leak running across floor after use Tim B. • Rumford , ME • March 23, 2014
I tore into the washer until i found what i thought was the problem which was the upper outer tub splash cover gasket and when i couldnt find one in my town i ordered a new one from u folks and replaced it hoping for the best and was successful. This fix costed me $35 instead of the $400+ for a new washer glad i looked into it instead of discarding it and buying a new one as most may do thanks
Read more
More
$36.76
- Compare At:
-
$43.74
- You Save:
-
$6.98
Genuine Frigidaire part
By: Frigidaire
Part Number: 134885900
Replacement suspension spring for washer tub support systems. Restores proper tension when original spring is weakened, broken, or causing tub tilt.
Do-It-Yourself Stories from Customers like You
My washer started banging bad on the spin cycle and i would have to force the top open rearange the load and then it would work to finish after further review it was the springs David H. • Englewood , FL • April 06, 2018
Watched a few of your videos and ordered the springs and a insert, and actually got the parts right. I am not a Appliance repair guy but I am retired and I am pretty handy so I thought what the heck. I watched the videos, a lot of common sense, common tools, and plenty of time. My knuckles are busted up and a little blood, but I got it done. Was actually kind of rewarding. Works like a champ. The Videos, ARE AWESOME.
Read more
More
$15.95
- Compare At:
-
$19.14
- You Save:
-
$3.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 3205241
Keep your dryer tumbling smoothly by restoring proper belt tension. This idler spring attaches to the idler arm and maintains tension on the drive belt so the drum turns reliably without slipping or squealing. What it does:
- Applies constant tension to the idler pulley to keep the drive belt tight around the drum and motor
- Helps resolve a drum that won't turn or tumbles intermittently
- Addresses belt issues such as slipping off, appearing loose, or premature breakage from low tension
- Can reduce squealing/chirping from the idler area caused by belt slip
What's included:
Install notes:
- Disconnect power; for gas dryers, also shut off the gas supply
- Access the idler assembly by removing the front or lower access panel per your model
- Relieve belt tension, unhook the old spring from the idler arm/frame, and install the new spring in the same orientation and holes
- Rotate the drum by hand to check smooth operation before reassembly
More
$55.95
- Compare At:
-
$67.14
- You Save:
-
$11.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 131843500
Replaces damaged or burnt-out dryer interior light assembly. Restores visibility when door opens. Includes bulb and socket. Verify fit by model number.
Do-It-Yourself Stories from Customers like You
Burnt lamp connectors. Doyle P. • Edmond , OK • September 19, 2020
Installed new Asmy-Lamp and added new wire connectors to harness.
Read more
More
$60.52
- Compare At:
-
$72.62
- You Save:
-
$12.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204490
Seals the blower housing to prevent air leaks and maintain efficient airflow. Replace if torn, damaged, or causing reduced drying performance.
Do-It-Yourself Stories from Customers like You
Banging noise when dryer drum rotated Jay C. • Upton , MA • December 30, 2025
Unplugged unit, removed front cover exposing drum seals and glides. Found a broken zipper slider jammed into the felt seal. Removed zipper slider and replaced drum seals and glides along with belt for preventive maintenance. Replaced front cover, plugged in unit.
Read more
More
$11.45
- Compare At:
-
$13.48
- You Save:
-
$2.03
Genuine Frigidaire part
By: Frigidaire
Part Number: 131205400
Replacement bracket screw for securing internal panels and brackets to your appliance frame. Needed when original screws are stripped, corroded, or missing.
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Frigidaire part
By: Frigidaire
Part Number: 134886600
Return spring for washer door lock mechanism. Restores tension so the latch returns to proper position. Replace if worn, missing, or causing loose latch.
More
$28.35
- Compare At:
-
$33.45
- You Save:
-
$5.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204254
Metal heat deflector that mounts near the dryer heating element. Replace if warped, cracked, or damaged to restore proper heat distribution and protect wiring.
Do-It-Yourself Stories from Customers like You
Dryer was not heating. Judith W. • Hemet , CA • December 31, 2023
Our dryer stopped heating. My husband changed out the entire heating element and replaced the baffle heater since it had warped. He put it back together and it is working beautifully. The videos provided by the website to help fix the problem are outstanding.
Read more
More
$91.95
- Compare At:
-
$109.42
- You Save:
-
$17.47
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304485558
The blower housing assembly encloses the blower wheel and channels air through the unit's coils. Replacing a cracked or warped housing helps restore smooth airflow and reduce blower noise caused by rubbing or misalignment.
- Directs and focuses airflow through the heat-exchange coils for proper operation
- Supports and aligns the blower wheel so it spins with correct clearance
- Helps minimize vibration and noise when the housing is intact
- Symptoms of a failed housing may include scraping or rattling noises, weak airflow, vibration, or visible cracks/broken mounts around the blower area
Includes: 1 blower housing assembly. Install notes:
- Disconnect power before servicing; wear cut-resistant gloves and eye protection.
- Remove the front panel/cabinet to access the blower section; note screw and clip locations.
- Transfer the blower wheel, seals, and any reusable hardware from the old housing.
- Before reassembly, spin the blower wheel by hand to ensure free, rub-free rotation.
Do-It-Yourself Stories from Customers like You
Grinding noise coming from stack unit dryer Daniel B. • Hughesville , PA • August 22, 2023
Old, unused stack set. Washer was great, dryer was grinding. Started with the mounting bracket/bearing and the belt. The old ones were slightly beatup. Put it back together and the problem persisted. Found the real problem when I pulled apart the blower to get to the motor. The fan had broken fins that had jammed in the side of the blower housing, and the friction had melted through the outer wall of the fan. Got the blower housing from APP, got the fan from a competitors for $30 less. When it...
Read more
More
$100.95
- Compare At:
-
$121.14
- You Save:
-
$20.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 3937010
Dryer stopped heating or takes hours to dry? This heating element restores proper heat output. Typical repair takes about an hour with basic tools.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
No heat Dean D. • Jackson , WY • February 01, 2015
Replaced heater.
Read more
More
$133.74
- Compare At:
-
$159.15
- You Save:
-
$25.41
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204368
Secures the door strike to your washer, keeping the latch aligned for firm closure. Replace if missing, stripped, or corroded to restore reliable latching.
Do-It-Yourself Stories from Customers like You
The lid striker broke so i ordered a new one Delores R. • Polkton , NC • June 24, 2016
It took less than 5 minutes to fix it. It was very simple, the part fit perfect. I will keep this web site in my favorites for later use.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83