Kenmore Refrigerator 596.65234400 (59665234400, 596 65234400) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPB2150504
This is a filter drier installed in the sealed refrigeration system that removes moisture and contaminants from the refrigerant as it circulates. It protects the compressor and other components from damage caused by moisture or debris in the refrigerant lines. Replace this filter drier if the refrigerator or ice machine is not cooling properly, the compressor is struggling, or during any sealed system repair where the refrigerant lines have been opened.
More
$81.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10464769
Damaged control housing can cause display errors or intermittent cooling. This housing protects the electronic control board from moisture and impact damage.
More
$35.89
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001919
Freezer frosting up or refrigerator not cooling? This evaporator coil kit solves frost buildup and cooling issues. Advanced repair, 2-3 hours.
More
$214.66
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 12456801V
Roller bracket that mounts refrigerator rollers to the base frame. Replace if your bracket is cracked, bent, broken, or missing to restore stability.
More
$37.64
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 67005680
Rubber grommet that cushions and secures the refrigerator condenser assembly. Replace if cracked, worn, or missing to reduce vibration and noise.
More
$14.56
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 681390
This genuine replacement screw secures panels and components so your appliance stays stable and trim pieces fit properly. It's a simple, exact-fit fastener intended to replace a missing or damaged mounting screw. What it does:
- Fastens panels, trim, control housings or brackets to the appliance frame
- Restores secure fit when a screw is missing, stripped, or corroded
- Helps eliminate rattling or loose panels caused by a missing fastener
- Matches OEM thread and head style for correct seating and torque
What's included: One screw (quantity: 1) Install notes:
- Use the correct screwdriver or bit to avoid stripping the head
- Do not overtighten; snug until parts are firmly seated
- Disconnect power and follow appliance safety guidelines before servicing
More
$16.10
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10709795
Replacement mounting screw for refrigerators, ranges, and other appliances. Replaces lost, stripped, or damaged screws during repairs or maintenance.
More
$12.10
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001098
Plastic cover that protects the fill tube connection in your refrigerator. Replace if cracked, broken, or missing to restore proper coverage.
More
$4.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPM0104106
$5.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11573362
Mounting screw for refrigerator assembly. Secures components and panels in place. Replace if screw is stripped, missing, or no longer holding tight.
Do-It-Yourself Stories from Customers like You
Missing screws and clips. Frank G. • Stafford , VA • October 15, 2017
Appliancepartspros had the items I needed in stock. The price was also fair compared to other vendors.
Read more
More
$21.46
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 10623002
This evaporator clip secures the refrigerator evaporator assembly and related components so the cooling system stays aligned and vibration-free. It helps maintain proper airflow and prevents rubbing or loose parts. What it does:
- Holds the evaporator coil/assembly or associated covers in place
- Prevents vibration, noise, and contact between the coil and cabinet parts
- Helps maintain consistent airflow for reliable cooling performance
- Commonly linked to rattling, buzzing, or loose parts around the freezer evaporator
What's included: One evaporator clip Install notes:
- Disconnect power before servicing the appliance
- Handle evaporator and surrounding fins carefully; they are sharp and fragile
- Verify clip orientation against the OEM diagram before fastening
More
$6.16
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 12726003
Protective cover for water valves and inlet hoses. Replace if cracked, broken, or missing to shield components from debris and accidental contact.
More
$17.06
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11673433
$67.26
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11702858
This outer cabinet housing provides a durable structural shell that supports internal components and protects them from debris and wear. It restores proper alignment and enclosure for safe, stable appliance operation. What it does:
- Replaces a cracked, dented, or misshapen outer housing that can allow debris or moisture into the appliance
- Restores proper mounting surfaces and clearances for panels, controls, and internal assemblies
- Helps reduce rattling or vibration caused by a compromised cabinet
- Prevents exposure of internal wiring and components to contaminants
What's included:
- One outer cabinet housing
Install notes:
- Recommended for experienced DIYers; some disassembly of panels and components is required
- Disconnect power and any water lines before beginning work
- Keep track of screws and brackets; some fasteners may be reused
More
$41.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10555984
$18.18
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
One of the teeth on the ice stripper was broken off Michelle F. • Hines , OR • August 07, 2014
Simply replaced the broken ice stripper with a new one.
Read more
More
$47.41
Out Of Stock
Usually ships within 4 - 14 days