Kenmore Refrigerator 596.65239402 (59665239402, 596 65239402) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003924
Freezer running too warm or too cold? This thermistor cover shields the temperature sensor for accurate cooling. Simple snap-in installation fixes misreads.
Do-It-Yourself Stories from Customers like You
Broken icemaker Gene C. • Maricopa , AZ • November 14, 2015
I am not a plumber, but very good with anything mechanical. I uninstalled the broken icemaker, swapped the wiring and ice bar from the old icemaker to the new one, and installed the new icemaker all in 12 minutes and 37 seconds from start to finish, which includes pulling out the two freezer baskets and pulling off the freezer door. This repair could not have been any simpler. Great product!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP10450603
Supports and enables smooth movement of your refrigerator cabinet. Replace if cracked, broken, or crumbled to restore stable positioning and mobility.
Do-It-Yourself Stories from Customers like You
The front bottom plastic roller of the refrigerator cracked and broke/crumbled under the weight of the fridge while rolling it out to clean behind it Pedro N. • Eustis , FL • June 02, 2014
I contacted Appliance Parts Pros' wonderful (comprehensive and accurate) website, to search for the part. I located the part, so I ordered it and received it within 4 days, which is also an advantage of using Appliance Parts Pros. Upon arrival of the part, I had to grind off one end of the river that acts as a hub for the wheel to turn on. Then I slipped the the plastic wheel, that I received from Appliance Parts Pros, onto the rivet and welded it to the metal cage it fits onto. Finally I...
Read more
More
$10.54
- Compare At:
-
$12.54
- You Save:
-
$2.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489349
This hex washer-head screw secures panels, brackets, and other components inside your appliance. Replacing a worn, stripped, or missing screw restores a tight fit, reduces vibration and rattles, and helps keep assemblies properly aligned.
- Fastens panels, brackets, covers, and internal hardware to the cabinet or frame
- Helps prevent loosening, rattling, or misalignment during appliance operation
- Replace if the head is rounded, threads are stripped, or the screw is missing
- Useful after service when an original fastener is lost or damaged
What's included: 1 screw Install notes:
- Disconnect power and shut off gas/water before starting
- Use the correct nut driver or socket for the hex head to avoid rounding
- Start threads by hand to prevent cross-threading; tighten snugly without overtightening
Do-It-Yourself Stories from Customers like You
A refrigerator door would not seal it had been blown off in a wind storm William H. • Sierra Vista , AZ • December 17, 2014
A friends family had left her refrigerator out on a porch while they were remodeling the house she was supposed to move into. A wind storm blew the refrigerator off the porch and tore the door off. It wasn't dented at all, but when her son pu the door back on, it wouldn't seal. She asked for some help fixing it. I ordered replacement parts for the upper and lower hinge. The parts arrived quickly. I unscrewed the top hinge which was slightly bent. Set the door on its side and replaced the bent...
Read more
More
$7.48
- Compare At:
-
$8.90
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: W11284721
Replaces cracked or broken refrigerator light covers. Protects bulb and shields components from moisture. Slides into place with mounting tabs. Verify fit.
Do-It-Yourself Stories from Customers like You
Broken light cover Thomas C. • New Milford , CT • March 11, 2016
Replaced the cover
Read more
More
$53.21
- Compare At:
-
$63.32
- You Save:
-
$10.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67005149
Rear roller that helps move your refrigerator smoothly. Replace if broken, cracked, or wobbling to restore easy mobility. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
Broken front cabinet roller. Don K. • South Jordan , UT • August 27, 2017
Removed all the food from the freezer and most from the fridge before starting. Tipped fridge back until I could place a 2 x 4 a couple of inches behind the front rollers. With the front of the fridge now approximately 3 to 4" off the ground you can remove the adjusting bolt and the roller assembly can be pulled out of the brackets. Slide out of the notches where that hold it into the bracket. Same to install.
Read more
More
$23.61
- Compare At:
-
$28.10
- You Save:
-
$4.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10169124
Protective seal grommet for hoses, tubes, or wires passing through refrigerator cabinet. Replaces cracked, worn, or missing grommets to prevent leaks.
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 67006425
This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.
- Provides the correct fastener for locations identified in your model's parts diagram
- Helps prevent looseness, vibration, and rattling of panels or brackets
- Replace if the head is stripped, threads are worn, or the screw is missing
- Symptoms can include loose parts, gaps, or noises from movement
What's included: One screw Install notes:
- Unplug the refrigerator and shut off water if working near the ice maker or dispenser
- Match length and type to the original; follow your model's parts diagram for placement
- Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
- Keep track of screw positions; do not mix different screw lengths or styles
Do-It-Yourself Stories from Customers like You
My grandson broke my rail mulln opeining and closing the refrigerator door Bobby B. • Fort Walton Beach , FL • January 21, 2015
I ordered the part from you which arrived much sooner than expected. I replaced the Rail-Mulln.
It was so easy to fix, next time I'll let my wife do it.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W11177593
Adjustable leveling foot that supports and stabilizes your refrigerator. Replace if worn, broken, or missing to eliminate wobbling and vibration.
More
$13.47
- Compare At:
-
$16.03
- You Save:
-
$2.56
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67006506
Replacement power cord for refrigerators. Restores electrical connection when the original cord is frayed, damaged, cracked, or has broken prongs.
Do-It-Yourself Stories from Customers like You
Dog ate the cord Katie T. • Colorado Spgs , CO • November 03, 2024
This was the perfect part, just put in the model and this came through.
Read more
More
$35.95
- Compare At:
-
$42.42
- You Save:
-
$6.47
Genuine Whirlpool part
By: Whirlpool
Part Number: 67006434
Replacement roller axle support shaft for refrigerators. Installs to support rotating assemblies. Replace when worn, damaged, or causing wobble.
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W11679940
Fix dim or no interior lighting with this refrigerator light bulb. Restores clear visibility when you open the door. Simple 5-minute replacement.
More
$8.56
- Compare At:
-
$10.27
- You Save:
-
$1.71
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
Ice stripper was broken on ice maker John A. • Baton Rouge , LA • March 12, 2015
Checked out the video on your site on how to disassemble the ice maker. Was really easy when you know the correct sequence. Only 3 screws and it's out of the freezer. Disassembled the ice maker on my kitchen counter and replaced the ice stripper. Reassembled and installed back in my freezer. It is as good as new
Read more
More
$47.41
- Compare At:
-
$56.42
- You Save:
-
$9.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2195914
Mounts in the dispenser to secure the ice housing assembly. Keeps the chute and door aligned for smooth dispensing. Replace if cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Dark bits of something embedded in the ice cubes and a crack in one of the plastic pieces of the ice maker Brett G. • Willow Park , TX • October 09, 2017
Replaced the ice tray and motor mount plate. While I was there I replaced the thermostat also. New parts arrived in a day and a half.
Read more
More
$53.95
- Compare At:
-
$64.02
- You Save:
-
$10.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WPB8381501
Seals the drain tube connection to prevent leaks and ice buildup in your freezer. Replace if you see water pooling or ice forming at the freezer bottom.
Do-It-Yourself Stories from Customers like You
Ice buildup in freezer Alex C. • Hartsdale , NY • April 10, 2020
Replaced clogged drain tube.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11402523
Replace a cracked, broken, or missing refrigerator glass shelf to restore flat storage space in the fresh-food compartment. Easy to install.
Do-It-Yourself Stories from Customers like You
My amana refrigerator needed additional shelves M N S. • St. Augustine , FL • May 01, 2017
The new shelves ordered from you fit perfectly, and were a breeze to install. (No tools needed.) Expected shelves to be delivered in 5 to 8 days after order was placed, but received them in TWO days! Great product, EXCELLENT customer service!
Read more
More
$143.23
- Compare At:
-
$170.44
- You Save:
-
$27.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12744905
Replacement flip-up cover for the butter/dairy bin on your refrigerator door. Replaces cracked, broken, or missing covers to keep contents secure.
Do-It-Yourself Stories from Customers like You
Ice maker not working Edward S. • Marshfield , VT • February 25, 2015
Replaced complete ice-maker. Unplugged fridge, removed freezer shelves (its a bottom freezer), loosened 4 self tapping screws to remove door. Removed bottom self tapping screw, loosened 2 top self tapping screws, disconnected wiring harness, removed ice-maker. Reused and attached wiring harness, front cover, wire stop for ice, cone shaped adapter for water to enter and one c-clip for wire harness. Reinstalled ice-maker in reverse order, cleaned bottom of freezer and door, reinstalled remaining...
Read more
More
$77.23
- Compare At:
-
$91.90
- You Save:
-
$14.67