Kenmore Refrigerator 596.72009010 (59672009010, 596 72009010) Parts

This insulation panel helps reduce heat transfer in the refrigerator cabinet so the appliance holds cold temperatures more efficiently and reduces frost buildup. It's a direct-fit replacement for the factory cabinet insulation. What it does:

• Slows thermal transfer between the cabinet and ambient air to help maintain interior temperatures
• Helps reduce frost buildup on evaporator and interior surfaces
• Improves cooling efficiency by minimizing cold-air loss
• Quietly adds a layer of thermal and acoustic insulation behind the liner

• Disconnect power and remove food before starting any repair
• Access requires removing the interior liner or trim
• Handle gently and wear gloves; insulation can tear or shed fibers
• Follow OEM instructions for adhesive or fastener placement and secure fit

A replacement ladder shelf support that holds and stabilizes a refrigerator shelf or bin track so stored items stay level and secure. Restores proper shelf alignment and prevents shifting or sagging. What it does:

• Supports and aligns a refrigerator shelf or bin track to keep items stable
• Replaces broken, bent or cracked ladder pieces that cause shelves to tilt
• Helps stop shelves or bins from slipping forward or coming loose
• Compatible with common Whirlpool refrigerator shelf mounting points

• Disconnect power or unplug the appliance before starting any repair.
• Remove shelves or bins as needed to access the ladder; handle glass shelves carefully.
• Use basic hand tools; avoid forcing parts—inspect for damaged mounting clips or guides.

The door hinge is an OEM part for Whirlpool refrigerators. It plays a role in holding the refrigerator door securely in place while allowing it to swing freely for easy access. The hinge is designed to withstand the pressure of opening and closing the door smoothly over many years of use.

Causes of a bad hinge include wear and tear from repeated opening and closing of the door, exposure to excessive force or impact, or overloading of the door with heavy items.

Symptoms of a bad hinge include:

• The door not closing properly or unevenly
• Increased effort required to open or close the door
• Noises or squeaking coming from the hinge area
• The door leaning or not staying securely closed

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

A straight replacement support rod used to secure or guide moving components in compatible laundry and kitchen appliances. Replaces a worn, bent, or broken rod to restore proper alignment and part movement. What it does:

• Provides structural support or alignment for linked components that rely on a straight mounting or guide pin.
• Restores smooth operation when the original rod is bent, broken, or missing.
• Helps eliminate binding, misalignment, or abnormal movement caused by a damaged rod.
• Works as a direct-fit replacement when the OEM part number matches your appliance.

• One replacement support rod (quantity: 1)

• Inspect surrounding brackets, clips, and fasteners for damage and replace if needed; rod ships alone.
• Turn off and unplug the appliance before attempting any repairs to avoid electrical shock or injury.
• Use basic hand tools; some disassembly may be required to access and remove the old rod.

This trim is a decorative replacement panel that restores the finished appearance of the appliance and helps protect the underlying edge from dirt and wear. Replaces a worn or damaged trim to improve fit and finish. What it does:

• Covers and protects the appliance edge or opening where installed
• Restores the exterior appearance after damage, chips, or scratching
• Helps keep debris and moisture away from the exposed edge
• Useful when gap, misalignment, or visible damage affects the appliance look

• Inspect mounting tabs and fasteners before installing; replace any broken hardware
• Install with the appliance powered off and panels cool; disconnect power if working near electrical components
• Align trim carefully to avoid cracking; secure with original fasteners or manufacturer-recommended hardware
• If the trim requires adhesive or clips, use only OEM-recommended parts and methods

This housing is the replacement outer tub housing that supports and secures the washer tub and related drive components for proper alignment and operation. Restores stable drum mounting and reduces abnormal motion. What it does:

• Supports the washer's tub/drum assembly so the drum spins smoothly and stays aligned
• Provides a mounting surface for suspension and drive components to reduce vibration and noise
• Helps prevent rubbing or scraping by keeping internal components correctly positioned
• Commonly replaced when the tub feels loose, spins unevenly, or makes unusual noises

• One housing

• Disconnect power to the appliance before beginning any repair
• Handle with care to avoid damaging seals, sensors, or surrounding trim pieces
• Verify correct orientation and torque for fasteners; follow OEM service manual steps

This evaporator clip secures the refrigerator evaporator assembly and related components so the cooling system stays aligned and vibration-free. It helps maintain proper airflow and prevents rubbing or loose parts. What it does:

• Holds the evaporator coil/assembly or associated covers in place
• Prevents vibration, noise, and contact between the coil and cabinet parts
• Helps maintain consistent airflow for reliable cooling performance
• Commonly linked to rattling, buzzing, or loose parts around the freezer evaporator

• Disconnect power before servicing the appliance
• Handle evaporator and surrounding fins carefully; they are sharp and fragile
• Verify clip orientation against the OEM diagram before fastening

This replacement oven door handle restores a secure grip for opening and closing the oven door. It replaces a damaged, loose, or missing handle to make door use safer and more convenient. What it does:

• Provides a sturdy grip for opening and closing the oven door
• Replaces handles that are cracked, bent, loose, or missing
• Helps prevent slippage and improves user control when handling hot appliances
• Matches the original mounting style for a straightforward replacement

• Use basic hand tools; support the door while removing and installing the handle to avoid injury or damage
• Disconnect power to the appliance or ensure it is cool before attempting replacement
• Tighten mounting fasteners securely but do not overtighten to avoid stripping

This slide is the replacement guide that lets an oven or warming drawer open and close smoothly, restoring proper support and alignment for the drawer. Durable, low-profile fit that helps reduce sticking and uneven movement. What it does:

• Guides and supports the oven/warmer drawer during use for smooth sliding action
• Helps prevent the drawer from binding, catching, or coming off the track
• Reduces noise and uneven movement caused by worn or damaged guides
• Restores correct alignment so the drawer closes flush and operates reliably

• Disconnect power to the appliance before beginning any repair
• Remove the drawer per the appliance service instructions to access the existing slide
• Compare the new slide to the old part for proper orientation before installing
• Tighten fasteners securely and test drawer operation; do not force components