Kenmore Refrigerator 596.75239403 (59675239403, 596 75239403) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 12991101
$9.95
- Compare At:
-
$11.94
- You Save:
-
$1.99
Genuine Whirlpool part
By: Whirlpool
Part Number: 489136
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: 67001067
Do-It-Yourself Stories from Customers like You
Water leaking into bottom of refrigerator and onto the floor Julie M. • St. Louis , MO • June 16, 2020
I watched your video on how to replace the drain tube and followed directions.
Read more
More
$6.95
- Compare At:
-
$8.34
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 876764
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Whirlpool part
By: Whirlpool
Part Number: 978026
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 978027
$53.37
- Compare At:
-
$64.04
- You Save:
-
$10.67
Genuine Whirlpool part
By: Whirlpool
Part Number: 978030
$56.50
- Compare At:
-
$67.80
- You Save:
-
$11.30
Genuine Whirlpool part
By: Whirlpool
Part Number: W10709795
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Whirlpool part
By: Whirlpool
Part Number: W10833902
This clamp secures flexible hoses to fittings to maintain a tight seal and prevent leaks. Use it to replace a worn or loose clamp to stop water or air seepage and restore proper hose attachment. What it does:
- Holds a washer, dryer, or appliance hose firmly to a barb or fitting to prevent slipping
- Helps maintain a watertight or airtight connection to reduce leaks and drips
- Replaces corroded, cracked, or stretched clamps that no longer grip reliably
- Supports normal appliance operation by keeping fluid/air flow contained
What's included:
Install notes:
- Inspect the hose and fitting; replace the hose if damaged before installing the clamp
- Position clamp over the hose barb and tighten evenly; avoid over-tightening that can cut the hose
- Disconnect power and water supply before servicing any appliance components
More
$7.33
- Compare At:
-
$8.80
- You Save:
-
$1.47
Genuine Whirlpool part
By: Whirlpool
Part Number: WP503695
$52.30
- Compare At:
-
$62.76
- You Save:
-
$10.46
Genuine Whirlpool part
By: Whirlpool
Part Number: WP505587
Do-It-Yourself Stories from Customers like You
High level of noise with each compressor cycle Bruce H. • Bonita Springs , FL • July 24, 2015
The installation of the new condenser motor was as the video described; there were no surprises. I noted the difference in operation immediately, the fan was moving at a higher rate of speed in a smoother motion. The new motor had far less shaft end play and seems to move more air across the condenser coil than the original motor. All in all, this was a relatively easy repair that solved a real refrigerator performance problem; the unit now cycles less often and generates less compressor heat.
Read more
More
$77.44
- Compare At:
-
$91.38
- You Save:
-
$13.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WP978025
$45.95
- Compare At:
-
$54.22
- You Save:
-
$8.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10137529
This rubber condenser grommet cushions and secures the condenser assembly to reduce vibration and noise, helping the refrigerator run quieter and preventing wear where the condenser mounts to the cabinet. What it does:
- Cushions condenser mounting points to reduce rattling and vibration
- Helps prevent metal-on-metal wear between condenser and chassis
- Keeps the condenser properly seated for reliable airflow
- Reduces noise caused by loose or worn condenser mounts
What's included: One condenser grommet. Install notes:
- Disconnect power to the appliance before beginning any service
- Access the condenser area per your model's service instructions
- Remove the old grommet and press the replacement into the mounting hole until seated
- Do not use solvents or adhesives unless specified by the manufacturer; wear gloves to protect hands
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10292802
$81.73
- Compare At:
-
$96.44
- You Save:
-
$14.71
Genuine Whirlpool part
By: Whirlpool
Part Number: W11772394
Do-It-Yourself Stories from Customers like You
Igniter switch shorted out Jeff J. • Hoffman Estates , IL • October 11, 2016
Replaced switch assembly
Read more
More
$7.60
- Compare At:
-
$8.44
- You Save:
-
$0.84
Genuine Whirlpool part
By: Whirlpool
Part Number: W11447232
The Light Bulb Socket is an OEM part for Whirlpool refrigerators. It is responsible for housing the bulb that illuminates the interior fridge light. The socket provides a protective casing and stable electrical connection for the light bulb. Its interior components are precisely arranged to safely conduct current to the bulb.
Causes of a bad light bulb socket can include cracks, loose connections, or damaged internal wiring due to regular use over time.
Symptoms of a bad light bulb socket include:
- The fridge interior light failing to turn on
- The bulb burning out quickly
- Flickering or intermittent lighting
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Socket and door switch for freezer not working. John M. • Westlake , LA • April 28, 2021
Replaced those two items listed above, please continue reading! I'm a mechanic by trade, so I have the basics. And what made this job easy? Appliance parts pros! very easy access to Part numbers and Diagrams, Online help, Customer service, and the list goes on. You will see several other sites, However! Wouldn't it be nice, knowing the above? Go no further! If you get stumped on anything during your Maintenance or Repair, They will Help.
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39