Kenmore Refrigerator 596.75264701 (59675264701, 596 75264701) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP503695
Genuine Whirlpool part
By: Whirlpool
Part Number: WP505587
Putty sealer adhesive for refrigerators and freezers. Seals joints, gaps, and connections. Replace when old sealant is cracked, dried out, or missing.
Do-It-Yourself Stories from Customers like You
High level of noise with each compressor cycle Bruce H. • Bonita Springs , FL • July 24, 2015
The installation of the new condenser motor was as the video described; there were no surprises. I noted the difference in operation immediately, the fan was moving at a higher rate of speed in a smoother motion. The new motor had far less shaft end play and seems to move more air across the condenser coil than the original motor. All in all, this was a relatively easy repair that solved a real refrigerator performance problem; the unit now cycles less often and generates less compressor heat.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP978025
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10137529
Refrigerator making rattling or vibrating noises? This condenser grommet cushions the condenser assembly to reduce noise and prevent mounting wear.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11772394
Do-It-Yourself Stories from Customers like You
Igniter switch shorted out Jeff J. • Hoffman Estates , IL • October 11, 2016
Replaced switch assembly
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11708403
Do-It-Yourself Stories from Customers like You
Door not stopping Jacqueline D. • Marlborough , MA • August 10, 2015
Ordered new bracket two screws easy fix
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11689473
Genuine Whirlpool part
By: Whirlpool
Part Number: W11750607
Reduces heat transfer in your refrigerator cabinet for efficient cooling and less frost buildup. Replace if damaged or deteriorated. Verify fit by model.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12726003
Protective cover for water valves and inlet hoses. Replace if cracked, broken, or missing to shield components from debris and accidental contact.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11673433
Genuine Whirlpool part
By: Whirlpool
Part Number: W11702858
This outer cabinet housing provides a durable structural shell that supports internal components and protects them from debris and wear. It restores proper alignment and enclosure for safe, stable appliance operation. What it does:
- Replaces a cracked, dented, or misshapen outer housing that can allow debris or moisture into the appliance
- Restores proper mounting surfaces and clearances for panels, controls, and internal assemblies
- Helps reduce rattling or vibration caused by a compromised cabinet
- Prevents exposure of internal wiring and components to contaminants
What's included:
- One outer cabinet housing
Install notes:
- Recommended for experienced DIYers; some disassembly of panels and components is required
- Disconnect power and any water lines before beginning work
- Keep track of screws and brackets; some fasteners may be reused
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPB8381501
Seals the drain tube connection to prevent leaks and ice buildup in your freezer. Replace if you see water pooling or ice forming at the freezer bottom.
Do-It-Yourself Stories from Customers like You
Ice buildup in freezer Alex C. • Hartsdale , NY • April 10, 2020
Replaced clogged drain tube.
Read more
More
$5.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
Ice stripper was broken on ice maker John A. • Baton Rouge , LA • March 12, 2015
Checked out the video on your site on how to disassemble the ice maker. Was really easy when you know the correct sequence. Only 3 screws and it's out of the freezer. Disassembled the ice maker on my kitchen counter and replaced the ice stripper. Reassembled and installed back in my freezer. It is as good as new
Read more
More
$47.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315522
This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.
- Holds the thermostat firmly against the evaporator line for proper temperature feedback
- Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
- Restores correct mounting when the original clip is cracked, bent, or missing
- Common signs include a broken clip or a thermostat not attached to the coil
What's included: 1 thermostat retainer clip Install notes:
- Disconnect power to the appliance before servicing; wear cut-resistant gloves
- Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
- Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
- Confirm a secure fit and proper wire routing before reassembling and restoring power
More
$7.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP854334
This seal strip replaces a worn or damaged door gasket edge to restore a proper seal and help the appliance maintain temperature and operate quietly. It's a direct-fit service part used where a continuous seal is required. What it does:
- Provides a flexible barrier along the door/frame to reduce air leaks and heat/cold loss
- Helps prevent moisture buildup and improves energy efficiency when sealing is restored
- Reduces rattling and vibration caused by a compressed or torn seal edge
- Commonly replaced when the strip is torn, missing, or no longer adheres properly
What's included:
Install notes:
- Disconnect power to the appliance before servicing to avoid electrical or burn hazards
- Clean and dry the mounting surface; remove old adhesive or residue for best adhesion
- Align the strip carefully and press firmly; allow any adhesive to cure per manufacturer instructions
More
$8.60
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627843
Ice cubes stuck in tray and won't eject? This ejector arm pushes ice from the mold into the bin. Simple snap-in install restores ice production.
More
$50.57
Out Of Stock
Usually ships within 4 - 14 days