Kenmore Refrigerator 596.79213010 (59679213010, 596 79213010) Parts

Ordered replacement door seals, assistance picking the seals and speed of shipping was excellent. The installation was about as easy a job as can be, remove old seals, clean the doors and press in the new seals. With that said, I don't believe these are the same quality as factory original seals, the doors do not close as positive as the original and I have an air leak in the freezer door seal allowing condensation and ice to form. Read more

Even though the fasteners probably only cost a few cents, I had to buy a new mullion for my fridge. $80! $80 because two nylon fasteners were poorly designed. Replacing the part was easy once I paid the *$80* for the new part. Unscrewed the old mullion. Slipped on the new $80 part. Read more

There are videos on You Tube,. After removing the bottom basket, you remove the entire drawer including the door together with it, by using a screwdriver to depress the white clip on each drawer slide which releases the slide from body of the freezer. Once you pull our the entire drawer, you will need to drill out a rivet to remove the old slide. You will need a rivet gun to attach the new slide. Read more

Had to take the back cover off. It was very tight to remove the fan that sat in the drip pan but did get it off, was able to apply the same level of cursing and got the new pan installed, installing the drain tube was a breeze. Found the parts price very reasonable. Hoping the Whirlpool redesigned the pan so I won't have to do it ever again. I was surprised at how bad the quality of their original part was. Probably saved myself $150.00 on buying the part and doing it myself Read more

All I needed was a $5 piece to fix my fridge, but without it I couldn't even us it. I ordered the part after 4:00 pm and had the new part shipped from Kentucky to NJ and had it by 10:00 am the next morning! Amazing! Great company. Read more

Let the gaskets straighten out a bit overnight. Pulled out the old gasket, Cleaned and dried the area well though almost all the mold was in the old gasket. Pressed in the new gasket. Use a hairdryer to warm up and press the slightly deformed areas of the gasket into place. Quick and EASY. Read more

New mounting screws and handle. BTW, the parts have been redesigned to be more robust. Easy fix and the Refrigerator// Freezer look like new. Read more

Ordered replacement valve and also roller assembly for right side (as the leveling leg would not turn). Parts were installed and are working well. Read more

I ordered new bins, and a new handle. Handle was very easy to replace with the same two screws that were on the original. The bins were even more simple to replace. Read more

First, I had to replace a cracked roller so I could roll the frig out. I did this by tilting it slightly and shoving a shim underneath. I had to use two shims to get enough clearance for the wheel. I unscrewed the old wheel, screwed in the new one pretty easy, removed the shims and rolled it out. Then I unplugged the frig from the power socket, removed 6 screws from the back panel, and pulled out the old drain kit, which had become clogged with dirt and dust. I put in the new drain kit,... Read more

The right door on our Jenn Air French Door Refrigerator would pop open & not fully close when the left door was closed first. Called the local distributor/dealer who advised me that the magnetic door gasket probably needed replacement (cost $300.00 + for the repair) What??? Visited you web site where I noted the right door had a "closure & bushing" on the bottom of the door. Could it be this was the problem fix? Took the right door off & examined both pieces. Sure enough the bushing was... Read more

Replace Read more

The noise seemed to be caused by a vibration. The condenser fan motor seemed to have a vibration. I didn't need the fan blade as it came off in good condition. Read more

There is nothing you can't do given the right YouTube video! We disassembled the bottom mount freezer n our Jenn Air refrigerator to remove all the ice and then located the clogged grommet on the back of the unit and cleared it and added a notch. In the process of reassembling we broke the bracket on a part that should have been the easiest portion of the entire installation! In seconds we located and ordered the part on your site. It arrived in a couple of days and then we removed the door and... Read more

Replaced light switch. That did not work, problem was in led lights. Read more

• Leaking

Ordered a new drip pan and drain tube and watched your extremely helpful video on replacing them. Read more