Kenmore Dishwasher 665.13043K110 (66513043K110, 665 13043K110) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10267076
This small plastic clip secures the tine row guards or protective caps on the dishwasher's upper or lower dishrack. It keeps the vinyl guard strips in place so they can protect dishes from scratching and prevent the rack tines from rusting. Replace this clip if the guard strips are falling off, sliding out of position, or if the original clip has cracked or broken.
Do-It-Yourself Stories from Customers like You
Top rack tracks and stoppers were broken Martina B. • Helotes , TX • December 19, 2015
I searched the model on Appliancepartspros.com and ordered the items needed with overnight shipping. My order came the next day :) All parts were in stock and came clearly labeled and orderly packaged. Within 10 minutes my dishwasher was back in business and I was one happy camper.
I would order from here again anytime and attempt to fixt the issue myself. Much cheaper that having somebody come out, only to tell you that they have to order the parts and come back at a later time to fix the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195373
Right-hand adjuster housing for dishwasher upper rack height adjustment. Replace broken, cracked, or missing housing with release lever mechanism.
Do-It-Yourself Stories from Customers like You
Upper diswasher basket adjuster Timothy D. • Columbia City , IN • June 13, 2014
Popped the piece apart and "popped" the replacement back in....Easy. A better illustration of how the parts "came apart" would have been helpful.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10817436
This factory-spec screw secures panels and components in your appliance. Replacing a missing or stripped fastener restores a tight, rattle-free fit so parts stay aligned and operate as designed.
- Fastens brackets, panels, and internal components to their mounting points
- Maintains alignment and reduces vibration during operation
- Replaces missing, worn, rusted, or stripped hardware
- Helpful when you notice rattling, loose panels, gaps, or parts shifting out of position
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supply if applicable
- Align the part being secured and remove any damaged hardware
- Hand-start threads to avoid cross-threading; tighten with the correct driver
- Do not overtighten; verify the assembly is secure and operates freely
Do-It-Yourself Stories from Customers like You
Wheel tub broken. Paul K. • Belleville , NJ • January 11, 2019
Replaced Wheel-Tub.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP676453
Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679
Do-It-Yourself Stories from Customers like You
Tines on my dishwasher rack was rusting rust was showing on my dishes Jean M. • Lenoir , NC • January 10, 2015
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10864394
This is a small cap that covers and seals the rinse-aid reservoir on a dishwasher door. It keeps the rinse-aid liquid contained so it dispenses at the correct time during the wash cycle to prevent water spots on dishes. Replace this cap if it is cracked, warped, or no longer seals properly, which can cause rinse-aid to leak out prematurely or result in spotty dishes.
Do-It-Yourself Stories from Customers like You
My dishwasher needed a cap for the spotless dispenser Mark P. • Traverse City , MI • October 14, 2014
The part came by mail in a timely fashion and I seated the cap in the dispenser. It took all of 5 seconds. Thanks for your help in making sure I had the correct part APP.com.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10107150
Secures the flexible tine-row comb on your dishwasher rack. Replace this clip if it's cracked, broken, or missing to keep fold-down tines aligned.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11027055
Fixes broken heating element brackets causing sagging or rattling noises in your dishwasher. Simple snap-on replacement restores proper element alignment.
Do-It-Yourself Stories from Customers like You
Not cleaning well, silverware very bad. Walter M. • Labelle , FL • December 10, 2017
Replaced spray arms and tube. Found all had debris in them and prohibited water pressure from reaching items. After replacement everything comes out sparkling. Don't understand how the spray arms getting plugged. Almost like waste water is recycled. Turns out to be a very easy project and if needed AppliancePartsPro has information and directions available at your finger tips.!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10343251
Dishwasher not heating or drying properly? This heater probe shield protects temperature sensors and nearby components from heat damage for accurate sensing.
Do-It-Yourself Stories from Customers like You
Our dishwasher would not start. Rory D. • Fairfield , CA • May 18, 2020
A bit of searching on the internet narrowed the problem down to either the heating element or the control board. As I am not much of a diagnostician I decided to replace both. Along this same line, I would never have attempted these repairs if it hadn't been for the clear, easy to understand repair videos provided for each part. Further, my decision to do my own repairs was made easier because the prices of the parts was so reasonable.
I took my time, reviewed the videos and replaced the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10300761
This replacement handle restores a secure, comfortable grip so you can open and close your appliance smoothly. It replaces a cracked, broken, or loose handle to bring back reliable operation and a clean, factory look.
- Provides sturdy leverage to open and close the unit's door or drawer
- Attaches to existing mounting posts or screws on compatible models
- Helps resolve issues like a loose, wobbly, cracked, or missing handle
- Restores appearance when the original handle is scuffed or damaged
What's included: 1 handle Install notes:
- Disconnect power before servicing; also shut off water
- Protect the surface with tape or a cloth to avoid scratches during removal/installation
- Align the handle carefully; start fasteners by hand to prevent cross-threading
- Tighten evenly and only until snug to avoid damage to threads or trim
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195372
Left-hand dishwasher rack adjuster housing with release lever. Replaces cracked, broken, or worn housing that holds rack adjustment mechanism in place.
Do-It-Yourself Stories from Customers like You
Dishwasher rack had problems, needed new adjustment housings Vincent M. • Canal Winchester , OH • April 02, 2020
Removed rack from tracks, took cover off each housing carefully. Removed housing. Line up new housing, lineup retaining cover and snap each corner in place.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 3385556
12 Ft in length
Do-It-Yourself Stories from Customers like You
Mice chewed the drain hose and power cord Noah C. • Eastsound , WA • February 16, 2015
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11126003
Replaces cracked, worn, or missing insulation pad in your dishwasher. Installs between components or panels to reduce vibration and heat transfer.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4396840RC
The dishwasher rack repair kit provides components to fix damaged dish racks, including replacement wheels, tines, and clips. Use this kit when rack wheels break, tines bend or snap off, or the rack becomes difficult to slide in and out smoothly.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392899
Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.
Do-It-Yourself Stories from Customers like You
Lack of accurate control on 2 electric range burners Jeff D. • Neenah , WI • April 09, 2016
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job.
The fix only took about 15 minutes because I was prepared after watching the video.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10082845
Secures your dishwasher light lens firmly in place. Replace if worn, missing, or causing rattles and poor light positioning. Confirm fit with your model.
More