Kenmore Dishwasher 665.13282K110 (66513282K110, 665 13282K110) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8531323
The Tub Inlet Gasket is an OEM part for Whirlpool dishwashers. It ensures a watertight seal at the point where water enters the tub, preventing leaks and maintaining efficient water flow during the wash cycle.
Causes of a bad tub inlet gasket include wear and tear from regular use, damage from harsh cleaning chemicals, or drying out and cracking due to age.
Symptoms of a bad tub inlet gasket include:
- Water leaking from the front or bottom of the dishwasher
- Poor cleaning results due to insufficient water pressure
- Visible cracks or wear on the gasket
- Unusual noises from the dishwasher during the filling cycle
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Jenn airJDB8000AWS3 dishwasher would not drain Lynden B. • Benicia , CA • December 17, 2019
Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to...
Read more
More
$25.95
- Compare At:
-
$30.62
- You Save:
-
$4.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WP308685
This cover screw secures appliance panels and covers, keeping components protected and aligned. Replace missing, stripped, or corroded screws to restore a tight fit and help eliminate rattles, gaps, or panels that won't stay in place.
- Attaches an access cover or panel to the appliance frame
- Helps maintain proper alignment to protect internal components
- Replaces missing, stripped, or rusted hardware
- Typical signs: loose or rattling panel, cover won't stay secure, damaged or rounded screw head
What's included: One screw Installation notes:
- Disconnect power before servicing
- Support the panel while removing and installing screws to prevent misalignment
- Start threads by hand to avoid cross-threading; do not overtighten
- Use a matching driver bit to avoid damaging the screw head
Do-It-Yourself Stories from Customers like You
Under the counter mounting brackets were missing Douglas A. • Glen Allen , VA • June 19, 2019
After several attempts at Local Hardware stores and Lowe's and Home Depot to find them I called AppiancePartsPros.com. I gave them the model number and what I was looking for and customer service directed me to the part on the Web site. They were extremely helpful and it was very fast and I got the parts the next day.
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Whirlpool part
By: Whirlpool
Part Number: W11612302
The Door Hinge Assembly is an OEM part for Whirlpool dishwashers. This hinge assembly is responsible for attaching the dishwasher door to the main body, allowing it to open and close smoothly while maintaining a proper seal when shut.
Causes of a bad door hinge assembly can include regular wear and tear, damage from excessive force or accidental impacts, and corrosion from exposure to moisture and detergents.
Symptoms of a bad door hinge assembly include:
- The dishwasher door not closing properly or staying open
- Difficulty opening or closing the dishwasher door
- A misaligned dishwasher door
- Unusual noises or resistance when moving the door
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dishwasher door popping opening Paul M. • Chester , NJ • November 04, 2018
We scoured the web and there are few references to this so I want to add it in case it helps.
Replacing hinges solved the popping opening issue.
We could not solve our dishwasher door issue after a number of other tries: Latch, Catch, Ropes that attach to the springs that pull the door closed.
I tend to believe the solve could be different b/c all these things work together. But for us, we were skeptical that the hinge swap would work and we were very pleasantly surprised.
Read more
More
$76.95
- Compare At:
-
$91.57
- You Save:
-
$14.62
Genuine Whirlpool part
By: Whirlpool
Part Number: WP356138
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
- Water leaks around hose connections
- Loose or disconnected hoses
- Unusual noises or vibrations during operation
- Water pressure issues within the washing machine
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water leak Steven K. • New City , NY • August 10, 2018
Took off cover, installed new parts.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10462232
The Detergent Dispenser Bracket is an OEM replacement part for Whirlpool dishwashers. Located inside the dishwasher tub along the edge, this bracket securely holds the entire detergent dispenser assembly in place.
Causes of a bad bracket may be normal wear and tear over time, damage from overloading dishes, or accidental impact affecting the integrity of the plastic.
Symptoms of a bad detergent dispenser bracket include:
- Loose or unstable detergent dispenser
- Detergent not dispensing or leaking
- Clanking noises coming from inside the tub
- Visible cracks, breaks, or deformations in the bracket
This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, and some Kenmore and Maytag models.
Do-It-Yourself Stories from Customers like You
Dishwasher detergent dispenser Howard K. • Rockaway , NJ • November 01, 2015
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself!
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP302868
Color: Black. Screw for lower toe panel. For Biscuit screw use 3400865, for white screw use WP3400836.
Do-It-Yourself Stories from Customers like You
Dishwasher door panel was rusting Prashant K. • Fishers , IN • October 11, 2014
I had no hope of separating the panel from the frame without damaging the frame since the two parts were rusted pretty badly and the screws holding the panel to the frame were completely beyond salvage. So I had to replace both the panel and the frame. I ended up removing the electrical/electronic connections, removing the panel/frame from the hinge and then replacing it with the new parts. Took about 90 minutes but the hardest part was removing other items from the rusting frame without...
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10077840
This dual tine positioner secures two rack tines together to keep dishes stable and properly spaced during the wash. Replacing a cracked or missing clip helps prevent plates and lids from tipping or rattling. What it does:
- Holds two adjacent rack tines in the selected position
- Helps maintain spacing for plates, lids, and trays
- Restores stable loading when the original clip is worn or broken
- Common symptoms: broken/missing clip, tines won't stay upright, items tip over or rattle
What's included:
- One dual tine positioner clip
Install notes:
- Slide the rack out; remove the old clip by releasing its tabs
- Align the new clip over two tines and snap it firmly into place
- Spin the spray arm by hand to confirm clearances before running a cycle
Do-It-Yourself Stories from Customers like You
Plastic posts for mounting screws on back of control panel fractured panel came loose Michael M. • Carrollton , TX • August 01, 2015
Replaced panel
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10455272
Supplies water to upper and lower spray arms.
Do-It-Yourself Stories from Customers like You
The rubber seal where the diverter motor slides into the sump seal was broke and motor was making a funny noise Wendy W. • Valdosta , GA • April 10, 2020
Since I was already taking the sump seal out, I decided to replace the two motors that looked nasty and was making noise too. The ease of ordering these parts with your site made this repair much faster including the repair videos you offer. Thank you for your help.
Read more
More
$46.95
- Compare At:
-
$55.87
- You Save:
-
$8.92
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10177098
The Hex-Head Screw is an OEM replacement part for use in Whirlpool dishwashers. This metal screw measures approximately ¾ inch long. Its primary purpose is to secure the dispenser bracket in place, ensuring stable operation. This hex-head screw is designed for use with compatible hexagonal tools. This makes installation and removal straightforward. This part is sold individually and is guaranteed to fit your dishwasher door panel. This screw is compatible with select Whirlpool brand models including Amana, Crosley, Estate, Inglis, Jenn Air, Kenmore, Kitchen Aid, and Maytag.
Do-It-Yourself Stories from Customers like You
Dishwasher detergent dispenser Howard K. • Rockaway , NJ • November 01, 2015
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself!
Read more
More
$10.41
- Compare At:
-
$12.28
- You Save:
-
$1.87
Genuine Whirlpool part
By: Whirlpool
Part Number: 4317824
The Power Cord Kit is an OEM replacement part for Whirlpool dishwashers. It is a 3-prong grounded, 16-gauge cord that includes all the hardware needed for installation. Includes all hardware needed for installation.
Causes of a bad power cord can include normal wear and tear over years of use, accidental impacts or cuts to the wiring, or improper installation that damages components.
Symptoms of a bad power cord include:
- The dishwasher not turning on or completing cycles
- Warm or hot power cords during operation
- Frayed, cracked, or exposed copper wiring
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Mice chewed the drain hose and power cord Noah C. • Eastsound , WA • February 16, 2015
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly.
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10346525
This overfill control float sits in the dishwasher tub and rises with the water level to signal the float switch to stop filling. Replacing a cracked or sticking float helps prevent leaks and recurring fill issues. What it does:
- Rises with the water level to actuate the float switch and stop the inlet valve
- Helps prevent overfilling and water leaking from the door
- A float stuck in the UP position can cause no fill or short fill
- A float stuck DOWN or damaged can allow overfilling
What's included:
Install notes:
- Disconnect power and turn off water before servicing
- Remove the lower rack; lift out the old float from its guide and clear any debris in the well
- Insert the new float, ensuring it moves freely and reliably actuates the switch when raised
Do-It-Yourself Stories from Customers like You
The heating element and float switch were broken. Calvin W. • Burke , VA • May 14, 2023
Replacing the heating element and float switch with AppliancePartsPros.com hardware and Repair Clinic YouTube videos. Just followed the videos and made the swaps. Was able to complete and test all repairs in a single evening.
Read more
More
$43.95
- Compare At:
-
$52.30
- You Save:
-
$8.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9741232
Quantity of ONE.
Size: 8-18 x 5/8 inch.
(#8 screw, 18 threads per inch, 5/8 inch long)
Do-It-Yourself Stories from Customers like You
My dishwasher was leaking out copious amounts of water while cycling Michael K. • Oakland , MI • July 11, 2019
While at my sister's house, she showed me how to access & dismantle the housing unit on her dishwasher, thinking the issue might be from that area. So, when I came home, I opened up my housing unit and found that several of the screws had come out and the pump outlet seal was stretched out and partially outside of the unit itself. I located all of the missing screws & discovered I was still missing one, which my husband helped me order with the pump outlet seal. I easily replaced the old seal...
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195373
Note: Right Hand side with release lever.
Do-It-Yourself Stories from Customers like You
Dishwasher rack had problems, needed new adjustment housings Vincent M. • Canal Winchester , OH • April 02, 2020
Removed rack from tracks, took cover off each housing carefully. Removed housing. Line up new housing, lineup retaining cover and snap each corner in place.
Read more
More
$46.95
- Compare At:
-
$56.34
- You Save:
-
$9.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10605058
This circulation pump and motor assembly drives water through the spray arms during the wash and rinse cycles. Replace it to restore proper wash performance when the dishwasher fills but doesn't spray, cleans poorly, or runs loudly. What it does:
- Circulates water from the sump through the spray arms for cleaning and rinsing
- Also called the wash motor; provides the pressure needed for effective spray
- Typical failure symptoms: poor cleaning, no spray or weak spray, loud humming/grinding, or leaks at the pump area
- Restores normal water circulation and wash pressure
What's included:
- One circulation pump-and-motor assembly
Install notes:
- Disconnect power and shut off water supply before servicing
- Access from the bottom/front of the unit; expect residual water—protect floors and wiring
- Move wiring and hoses carefully; transfer any clamps, seals, or brackets from the original as needed
- Ensure seals are seated, reconnect hoses/wiring, then run a short cycle and check for leaks
Do-It-Yourself Stories from Customers like You
Whirlpool dishwasher about 2 years old would fill but would not wash it would empty when cancel was pushed Joe G. • Middletown , CT • December 14, 2014
I paid $90 for a repairman fee to tell me I needed a motor. I submitted the same problem to you and you gave me the same advice for FREE. I ordered the unit from you . It came in promptly, It took me about 3 hours to replace and saved about a $300-$400.repair estimate. Thanks.
Read more
More
$201.47
- Compare At:
-
$239.75
- You Save:
-
$38.28
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10109200
This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.
- Fastens panels, brackets, or internal parts to the cabinet/frame
- Helps maintain alignment to reduce vibration and rattling
- Replaces lost, stripped, or corroded screws
- Common symptoms: loose panels/trim, rattles, or a screw that won't tighten
What's included: One screw. Install notes:
- Disconnect power; shut off water or gas if applicable
- Match thread and length to the original; replace one at a time to keep alignment
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten, especially into plastic or thin sheet metal
Do-It-Yourself Stories from Customers like You
Missing baffles Anna S. • Shoreview , MN • January 31, 2016
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP676455
Color: Grey. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For white use WP676453. For tips use 676458.
Do-It-Yourself Stories from Customers like You
Rusty tips on tops of posts in top and bottom racks of kitchen aid dishwasher James O. • Bedford , OH • July 04, 2016
Used the vinyl touch up paint on the tops of posts and slid vinyl tips over 130 posts. The paint acts as an adhesive to keep the tips secure.
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74