Kenmore Compactor 665.13613102 (66513613102, 665 13613102) Parts
Bestselling
Price High to Low
Price Low to High
By: Whirlpool
Part Number: 775481
This precision thrust race serves as the hardened bearing surface for axial loads in a rotating mechanism. Replacing a worn race reduces friction and noise, helping restore smooth, consistent motion and protect companion thrust bearings and washers from accelerated wear.
Provides the hardened bearing surface for a thrust bearing assembly Supports axial load and helps maintain proper end-play in the mechanism Reduces friction to allow smoother rotation under load Wear may present as grinding/scraping noises, rough or binding motion, excessive axial play, or visible scoring What's included: 1 thrust race Installation notes:
Disconnect power and shut off water/gas before servicing Access the thrust-bearing area; note the order and orientation of races, bearings, and washers for reassembly Clean mating surfaces; replace any worn companion parts and lubricate only if specified by the service documentation Seat the new race fully and verify free movement by hand before reassembly and testing
Do-It-Yourself Stories from Customers like You
Ram stuck in down position due to bearing going out Cody G. • Conway , AR • July 16, 2020
I bought new thrust races, a drive gear kit, bearings and a sprocket. When the bearing went out, the thrust races, washers, one bottom plate, and a sprocket was eaten up by the the chain due to the slack being created. I followed the video for the Drive Gear Kit repair and everything went together well. I did have to remove the tracks from inside the compactor in order to remove the cardboard liner that "hides" the drive rods. Additionally, be careful to not over-tension the chain when...
Read more
More
$37.41
Compare At:
$44.14
You Save:
$6.73
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: WP777108
Bag carrier handle assembly for trash compactors. Secures the disposable liner bag in place. Replace if cracked, broken, or missing to restore safe bag handling.
Do-It-Yourself Stories from Customers like You
News inner liner for trash masher Betty K. • Butte , MT • December 25, 2016
News one installed quick and easy
Read more
More
$18.23
Compare At:
$21.88
You Save:
$3.65
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: 776327
Metal mounting bracket that secures internal components in your trash compactor. Replace if bent, damaged, or missing to restore stable part alignment.
More
$60.52
Compare At:
$71.41
You Save:
$10.89
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: W11023674
Replacement leveling wheel for trash compactors and ranges. Installs on the cabinet base to restore smooth rolling and proper leveling adjustment.
More
$51.62
Compare At:
$61.94
You Save:
$10.32
Usually ships within 4 - 14 days
Do you need help?
Get Questions Answered Instantly.
By: Whirlpool
Part Number: 675370
Drive sprocket for trash compactor power screw assembly. Replaces worn, broken, or stripped gear that transfers motor power to the drive system.
Do-It-Yourself Stories from Customers like You
Broken bearing on screw drive Gary S. • Beach City , OH • June 26, 2015
Replaced broken parts
Read more
More
$18.23
Compare At:
$21.51
You Save:
$3.28
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: 72113
0.6 oz. platinum touch-up paint with brush for appliances. Repairs scratches, chips, and gouges on doors, handles, and trim panels. Acrylic formula.
More
$15.95
Compare At:
$19.14
You Save:
$3.19
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: 780477
Drive chain connects the motor to the ram mechanism in your trash compactor. Replace if the chain is broken, stretched, or missing to restore compaction function.
More
$101.57
Compare At:
$119.85
You Save:
$18.28
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: 775665
Door strike plate for trash compactors. Mounts to cabinet frame to secure the door latch. Replace if cracked, bent, or missing to restore proper closure.
More
$44.44
Compare At:
$52.88
You Save:
$8.44
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: 776035
Fix excessive noise or wobbling components in your trash compactor with this wave washer retainer. Secures shaft-mounted parts to prevent movement.
More
$12.13
Compare At:
$13.34
You Save:
$1.21
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: W11696573
Replace your trash compactor's ram if it's bent, cracked, or damaged. This compression component installs at the top of the unit and directly compacts waste.
More
$204.95
Compare At:
$243.89
You Save:
$38.94
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: 4154842
Replacement power screw nut for trash compactors. Mounts on the drive screw mechanism. Order a new nut if yours is stripped, cracked, or worn out.
Do-It-Yourself Stories from Customers like You
Broken bearing on screw drive Gary S. • Beach City , OH • June 26, 2015
Replaced broken parts
Read more
More
$36.68
Compare At:
$43.65
You Save:
$6.97
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: 775736
Latch spring for trash compactors. Installs in the door latch mechanism to provide tension. Replace if cracked, broken, or missing to restore proper latch function.
More
$41.39
Compare At:
$49.25
You Save:
$7.86
Usually ships within 4 - 14 days
Shop With Confidence
Over 15 million customers served!
By: Whirlpool
Part Number: WP9871309
White front container panel for trash compactors. Replaces scratched, chipped, or discolored panels on the compactor container exterior. Restores appearance.
More
$64.70
Compare At:
$76.99
You Save:
$12.29
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: 777850
$23.88
Compare At:
$26.27
You Save:
$2.39
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: WP780437
$109.67
Compare At:
$120.64
You Save:
$10.97
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: WPW10242557
Front guard plate for trash compactors. Protects the compactor front panel from damage. Replace if cracked, torn, or worn to restore appearance.
Do-It-Yourself Stories from Customers like You
My trash compactor was white and I have replaced every thing else in the kitchen with stainless Richard G. • Las Vegas , NV • March 10, 2017
Purchased the door plate in chrome, door sweep in black rubber and spray painted the remaining visible areas with black paint. Looks the same as a new unit costing 8 times as much.
Read more
More
$75.95
Compare At:
$89.62
You Save:
$13.67
Usually ships within 4 - 14 days