Kenmore Dishwasher 665.1544590 (6651544590, 665 1544590) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 3374711
$77.29
- Compare At:
-
$91.98
- You Save:
-
$14.69
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10102260
$66.95
- Compare At:
-
$79.67
- You Save:
-
$12.72
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3369176
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3369326
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488234
$4.95
- Compare At:
-
$5.89
- You Save:
-
$0.94
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8562003
$31.40
- Compare At:
-
$38.47
- You Save:
-
$7.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 371499
This small black clamp secures a hose, tube or wiring harness to prevent movement and abrasion. It's a direct-fit replacement used to keep connections stable so lines stay routed and protected during normal appliance operation. What it does
- Holds small hoses, tubing or wiring harnesses firmly in place
- Prevents chafing and accidental disconnection from vibration or movement
- Helps maintain routing to reduce stress on attached components
- Commonly used where a compact, non-corrosive clip is required
What's included One black clamp Install notes
- Disconnect power before servicing any electrical appliances
- Use appropriate hand tools; avoid over-tightening which can damage hoses
More
$9.62
- Compare At:
-
$11.45
- You Save:
-
$1.83
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3374885
$101.62
- Compare At:
-
$113.46
- You Save:
-
$11.84
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3400959
$14.36
- Compare At:
-
$17.09
- You Save:
-
$2.73
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3369031
This drain cover seal creates a watertight gasket between the washer's drain cover and housing to help stop leaks and keep lint and debris out of the drain pump area, restoring reliable drainage and reducing mess. What it does:
- Seals the drain cover to prevent water from leaking at the base of the tub or access area.
- Helps block lint, coins and small debris from entering the drain pump housing.
- Restores proper drainage by maintaining a secure, even seal around the drain opening.
- Can reduce recurring puddles or water on the floor near the washer's front/bottom.
What's included: One drain cover seal. Install notes:
- Disconnect power and turn off water supply before starting work.
- Remove the drain cover/access panel per your model's instructions and clean mating surfaces before installing the new seal.
- Press or seat the seal evenly into the cover/housing; confirm correct orientation and full contact around the perimeter.
- After reassembly, restore power/water and run a short test cycle to check for leaks.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4318273
The Latch Switch Kit, an OEM Replacement Part is designed to ensure the safe operation of your Whirlpool dishwasher. The kit includes two microswitches and a wiring harness. It prevents the appliance from running when the door is open. If defective, the door switch may prevent the dishwasher from operating even when the door is closed.
Causes of a bad door switch can include wear and tear, exposure to moisture, or a broken actuator.
Symptoms of a bad door switch include:
- Dishwasher not starting
- Dishwasher stopping mid-cycle
- Error codes related to door issues
- Dishwasher running with the door open
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The door latch would not catch as a result i was unable to use my dishwasher Joel C. • Shreveport , LA • January 09, 2016
I ordered the Door Switch Kit, along with a few other items. However, the switch kit was all that was needed. Isimply followed the instructions that came with the kit. It was necessary to cut the wires which connected to the wire assembly in the door of the dishwasher. I then connected the pieces from the switch kit and then connected the end pieces to the door. I closed the door, and started up the dishwasher. It worked as well as before.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10102498
Do-It-Yourself Stories from Customers like You
Replaced float and float switch Roland B. • Smithtown , NY • May 21, 2016
Very easy to repair. All the parts fit perfect. Entire repair took 20 mins.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 3380595
Do-It-Yourself Stories from Customers like You
Would not drain Thomas W. • Las Vegas , NV • September 12, 2015
Called appliance parts pro
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10247394
Do-It-Yourself Stories from Customers like You
Leaking ot of the pump Edward F. • Danbury , CT • September 05, 2015
I replaced the pump/motor assemble and the seal. Took less than 10 minutes to fix and that was with me thinking about it for 5 minutes before I started.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3374010
Color: Black. Other colors: For white use 3374011, for almond use 3374012.
Do-It-Yourself Stories from Customers like You
Part missing when i bought it Mike F. • Cedar Rapids , IA • October 23, 2015
Replaced part, took about 2 minutes to install. Part fit great.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3368955