Kenmore Dishwasher 665.17389300 (66517389300, 665 17389300) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8171477
This mounting kit secures your dishwasher's tall tub to the floor, preventing movement and vibration during operation. It replaces worn or missing floor mounting hardware that can cause your dishwasher to rock or shift during wash cycles.
More
$18.36
- Compare At:
-
$20.59
- You Save:
-
$2.23
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8531018
Flat washer for dishwasher fasteners. Distributes load and prevents loosening at mounting points. Replace when worn or missing to reduce vibration. Confirm fit with your model number.
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8562090
Replacement silverware basket for dishwashers. Installs in lower rack to hold utensils during wash cycles. Order when original is cracked or missing.
More
$74.69
- Compare At:
-
$89.63
- You Save:
-
$14.94
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W11806608
Do-It-Yourself Stories from Customers like You
Dishwasher door popping opening Paul M. • Chester , NJ • November 04, 2018
We scoured the web and there are few references to this so I want to add it in case it helps.
Replacing hinges solved the popping opening issue.
We could not solve our dishwasher door issue after a number of other tries: Latch, Catch, Ropes that attach to the springs that pull the door closed.
I tend to believe the solve could be different b/c all these things work together. But for us, we were skeptical that the hinge swap would work and we were very pleasantly surprised.
Read more
More
$82.59
- Compare At:
-
$91.77
- You Save:
-
$9.18
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W11763739
Access panel covers the base of your dishwasher, concealing wiring and mechanisms. Replace if cracked, broken, or missing after installation.
More
$29.73
- Compare At:
-
$35.68
- You Save:
-
$5.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 8534946
Protective cover that installs over your dishwasher's capacitor. Replace if cracked, broken, or missing to shield the capacitor from debris and contact.
More
$13.48
- Compare At:
-
$15.91
- You Save:
-
$2.43
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400931
The Whirlpool push on retainer nut is an OEM replacement part responsible for securing the heating element in the dishwasher. It is located in the base of the dishwasher's tub to hold the heating element firmly in place. The push-on retainer nut keeps the heating element securely connected to the dishwasher's electrical system while allowing for easy removal and replacement when necessary.
Over time, push on retainer nuts can become loose, worn out, or damaged due to regular use, vibrations, or accidental mishandling. If a retainer nut fails, it can lead to parts becoming unstable or disconnected.
Symptoms of a bad push on retainer nut include:
- Loose or unstable dishwasher components
- Parts falling off or becoming misaligned
- Unusual noises during the wash cycle
- Difficulty in securing components within the dishwasher
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models
Do-It-Yourself Stories from Customers like You
Our dishwasher would not start. Rory D. • Fairfield , CA • May 18, 2020
A bit of searching on the internet narrowed the problem down to either the heating element or the control board. As I am not much of a diagnostician I decided to replace both. Along this same line, I would never have attempted these repairs if it hadn't been for the clear, easy to understand repair videos provided for each part. Further, my decision to do my own repairs was made easier because the prices of the parts was so reasonable.
I took my time, reviewed the videos and replaced the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP661658
The Dishwasher Drain Pump is an OEM part for Whirlpool dishwashers. It is responsible for removing water from the dishwasher at the end of each cycle, ensuring that dishes are properly cleaned and dried.
Causes of a bad drain pump can include wear and tear from regular use, blockages from debris, or electrical malfunctions.
Symptoms of a bad drain pump include:
- Water not draining from the dishwasher
- Unusual noises during the drain cycle
- Error codes related to drainage issues
- Water pooling at the bottom of the dishwasher
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dishwasher drain pump not working Steve E. • Tampa , FL • January 14, 2015
When the wife told me the dishwasher was leaving water in the bottom of the tub I hoped it'd be that the filter was just clogged. Nope. We usually clean our dishes before cleaning them which always makes me laugh but the drain was clear after 9 years of use, so I figured it was the pump. This was a $200 minimum for the appliance guy to replace, so I thought I'd try and do it myself.
Job wasn't too bad. Found a youtube video from another machine than mine which I hoped would help.. these...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268395
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8269208
This temperature sensor monitors water temperature inside your dishwasher and sends signals to the control board for proper cycle operation. It ensures water reaches the correct temperature for effective cleaning and sanitizing. Replace this thermistor if dishes aren't getting clean, water isn't heating properly, or the dishwasher displays temperature-related error codes.
Do-It-Yourself Stories from Customers like You
Would not complete a cycle the clean light would flash seven times indicating a faulted heater circuit ohm check good on the element thermistor would not open a 75 to 80 deg Ralph B. • Watauga , TX • October 21, 2016
Unplug the old twist remove. Push the new one in twist,plug the wires in. Flop around on floor under sink to hook every thing up.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268325
Do-It-Yourself Stories from Customers like You
Parts had warn and broken off of top rack of dishwasher Linda M. • Minerva , OH • November 30, 2014
Husband replaced them with new parts we purchased from Appliancepartspros.com.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268332
Do-It-Yourself Stories from Customers like You
Dishwasher not getting dishes clean Charlie C. • Alna , ME • August 27, 2017
Replaced upper and lower spray arms and a few other parts.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268522
Replacement retainer that secures the FlexRow assembly in your dishwasher rack. Needed when original is cracked, broken, or missing causing instability.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8579224
Do-It-Yourself Stories from Customers like You
Dishwasher not getting dishes clean Charlie C. • Alna , ME • August 27, 2017
Replaced upper and lower spray arms and a few other parts.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392900
Color: Biscuit. Size: 1 qt. can uncut. Enamel paint.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8171555