Kenmore Compactor 665.7464002 (6657464002, 665 7464002) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 776941
Replacement drive hub that secures the compactor's power screw to the transmission. Needed when the original hub is worn, cracked, or broken.
Do-It-Yourself Stories from Customers like You
Broken bearing on screw drive Gary S. • Beach City , OH • June 26, 2015
Replaced broken parts
Read more
More
$19.79
- Compare At:
-
$21.18
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9870975
Left side frame slide for trash compactors. Replaces cracked, broken, or worn slides that support the compactor drawer. Essential structural component.
More
$52.31
- Compare At:
-
$62.25
- You Save:
-
$9.94
Genuine Whirlpool part
By: Whirlpool
Part Number: 775481
Fix a stuck ram or grinding noise in your trash compactor. This hardened thrust race bearing surface reduces friction and protects against wear. Moderate DIY.
Do-It-Yourself Stories from Customers like You
Ram stuck in down position due to bearing going out Cody G. • Conway , AR • July 16, 2020
I bought new thrust races, a drive gear kit, bearings and a sprocket. When the bearing went out, the thrust races, washers, one bottom plate, and a sprocket was eaten up by the the chain due to the slack being created. I followed the video for the Drive Gear Kit repair and everything went together well. I did have to remove the tracks from inside the compactor in order to remove the cardboard liner that "hides" the drive rods. Additionally, be careful to not over-tension the chain when...
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Whirlpool part
By: Whirlpool
Part Number: 776327
Metal mounting bracket that secures internal components in your trash compactor. Replace if bent, damaged, or missing to restore stable part alignment.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP777332
Conical washer for trash compactor assemblies. Maintains tension under screws or bolts to keep components aligned. Replace if worn, cracked, or missing.
Do-It-Yourself Stories from Customers like You
Spider bearing failed and the chain locked, which caused the big gear to break on my GE trash compactor. Kelly G. • Heber Springs , AR • January 25, 2020
Replaced all damaged parts.
Read more
More
$4.73
- Compare At:
-
$5.58
- You Save:
-
$0.85
Genuine Whirlpool part
By: Whirlpool
Part Number: 775665
Door strike plate for trash compactors. Mounts to cabinet frame to secure the door latch. Replace if cracked, bent, or missing to restore proper closure.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 780477
Drive chain connects the motor to the ram mechanism in your trash compactor. Replace if the chain is broken, stretched, or missing to restore compaction function.
More
$96.48
- Compare At:
-
$114.81
- You Save:
-
$18.33
Genuine Whirlpool part
By: Whirlpool
Part Number: 776035
Fix excessive noise or wobbling components in your trash compactor with this wave washer retainer. Secures shaft-mounted parts to prevent movement.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP486754
Mounting screw for washers. Secures internal components and panels. Replace if stripped, missing, or damaged during repairs or maintenance.
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP776036
Fix parts sliding off shafts or shifting during compaction. This C-ring snaps into grooves to secure components and prevent axial movement in your compactor.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP454512
Slotted pin spring secures moving parts in trash compactor assemblies. Replace if worn, missing, or damaged to restore proper retention and alignment.
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W11214485
Flat metal washer distributes load and maintains proper alignment between fasteners and components. Replace when worn, corroded, or missing. Confirm fit with your model number.
More
$10.38
- Compare At:
-
$11.74
- You Save:
-
$1.36
Genuine Whirlpool part
By: Whirlpool
Part Number: 882699
Replace your trash compactor's broken or stripped drive gear assembly. Includes gears, shafts, and components that transfer motor power to the ram mechanism.
This part fixes the following symptoms
-
Compactor ram gets stuck
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Fractured drive gear Keith S. • Warrenton , VA • February 09, 2016
The compactor failed with the ram down, so the drawer wouldn't open which in turn made the mounting brackets inaccessible. This necessitated sliding a thin oscillating saw blade between the cabinet face frame and the counter top to cut through the brackets. It was then possible to roll the unit out and place it on its side. I removed the five screws holding the bottom pan in place, dropped the pan exposing the gear/chain train. The large gear was cracked from shaft out to the edge. One of...
Read more
More
$70.45
- Compare At:
-
$84.54
- You Save:
-
$14.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP608732
Replacement handle for trash compactor drawer. Mounts to the front of the drawer to provide a secure grip. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Broken handle on trash compactor Lydia R. • Modesto , CA • February 07, 2015
Ordered the part, which arrived incredibly fast and switched out old one for the new.
Read more
More
$99.72
- Compare At:
-
$118.67
- You Save:
-
$18.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 675379
If your compactor door won't stay closed or the latch is stuck, this door lock latch assembly secures the door during operation. Simple container removal.
More
$76.40
- Compare At:
-
$90.92
- You Save:
-
$14.52
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP777108
Bag carrier handle assembly for trash compactors. Secures the disposable liner bag in place. Replace if cracked, broken, or missing to restore safe bag handling.
Do-It-Yourself Stories from Customers like You
News inner liner for trash masher Betty K. • Butte , MT • December 25, 2016
News one installed quick and easy
Read more
More
$17.95
- Compare At:
-
$21.36
- You Save:
-
$3.41
Out Of Stock
Usually ships within 4 - 14 days