Kenmore Range 665.75843005 (66575843005, 665 75843005) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8053807
This hinge is for painted door only. For stainless steel door use WP8272822.
Do-It-Yourself Stories from Customers like You
The oven door would not close completely William R. • Emporia , KS • July 27, 2016
This oven was a Kenmore model #66595822003. I replaced both spring hinges. This oven was a white oven so it took the MFG# WP8053807 hinge (order two of them). They are the same hinge. No left or right. To get the door off the oven, open the door all the way open, I installed pins (preferably only 1/4" long) in the holes of both hinges. Then remove the spring steel retainers above old hinges in the oven frame. These holds hinges in place. Now close the door until hinge stops on pins. Lift up...
Read more
More
$75.63
- Compare At:
-
$90.00
- You Save:
-
$14.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196068
This red indicator light lens covers the control-panel light opening. It restores a clean, finished look and keeps the status light easy to see while helping protect the opening from debris and accidental contact.
- Covers and diffuses the indicator light for clear visibility
- Fills the control panel opening for a finished, factory appearance
- Helps shield the opening from dust, splashes, and contact
- Common fixes: cracked, missing, loose, or discolored indicator lens
What's included: 1 red indicator light lens Install notes:
- Disconnect power by unplugging the appliance or switching off the breaker before servicing
- Access the control panel/backguard per your model's instructions
- Release the old lens (tabs/retainer) and press the new lens into the opening until fully seated
- Restore power and verify the indicator light is visible through the lens
Do-It-Yourself Stories from Customers like You
Dual burner only went to high nothing in between C N. • Green Valley , AZ • October 28, 2014
Replaced this switch and now the dual burner works perfectly. Saw a broken indicator light when I had the back off and replaced that also. Whole job took under an hour. The shipping was very quick.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8053834
Color: White
Do-It-Yourself Stories from Customers like You
Broken oven door glass and trim Heidi A. • Topeka , KS • December 05, 2014
Replaced glass and trim
Read more
More
$139.25
- Compare At:
-
$165.71
- You Save:
-
$26.46
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8523167
Color: Biscuit. Right hand side. For left hand use WP8523173
Do-It-Yourself Stories from Customers like You
I broke two trim pieces taking the oven door apart to clean it since i was ordering to side trim pieces i decided to replace the bottom door trim piece as well since it was bent and rusty Jennifer W. • Richmond , CA • July 19, 2016
The hardest part of this repair was a) realizing that the easiest way to clean the oven door pieces is to remove the whole door and b) figuring out how to put the oven door back on. Doing (b) is infinitely easier if you stick two allen wrenches into the holes in the door hinge, but these holes ONLY appear when the door is fully open. Prop the hinges open BEFORE you remove the door.
As many posters online will tell you, it is easy to remove the oven door but hard to put it back on. It...
Read more
More
$54.35
- Compare At:
-
$65.22
- You Save:
-
$10.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8523173
Color: Biscuit. Left hand side. For right hand use WP8523167
Do-It-Yourself Stories from Customers like You
Replace plastic trim pieces on maytag electric oven door Thomas L. • Dillsburg , PA • January 04, 2015
Primarily, removed oven door. Be cognizant of how you disassembled ... Very important when you reassemble !
By-the-way,this was ALL PRECIPITATED by wanting to clean the interior side of oven door glass after my wife self-cleaned the oven! How in-the-world did grease get there in the first place!?
While disassembling door, after removing from body of oven , the right side trim piece (being Very brittle) Broke ! Than, due to the same reason, the left side trim piece Broke ! Yippee ! That will...
Read more
More
$55.37
- Compare At:
-
$66.44
- You Save:
-
$11.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9757218
This surface burner valve regulates gas flow to a top burner on your gas range or cooktop. The simmer version enhances low-heat control so the flame adjusts smoothly from a steady simmer to a full boil. What it does:
- Regulates gas to the surface burner as you turn the knob, controlling flame size
- Simmer variant improves stable low-flame performance at lower settings
- Common failure symptoms: burner won't light though the igniter sparks, flame won't adjust or stays at one level
- Knob feels stiff/binds or the stem no longer aligns correctly with settings
What's included:
Install notes:
- Disconnect electrical power and shut off the gas supply before servicing
- Remove the control knob and access the valve/manifold from the control panel or cooktop top
- Note the original valve's orientation for your burner position; transfer mounting hardware as needed and tighten all gas connections securely
- After reassembly, restore gas and check every joint for leaks with an approved leak-detection solution; verify proper flame and adjustment
Do-It-Yourself Stories from Customers like You
The stem of the burner valve broke off Marcello A. • Bellerose , NY • December 31, 2016
I searched on your website for a replacement stem. Unfortunately the stem is not sold separately. I purchased the entire valve after confirming with your online rep that I was ordering the correct part. I received the valve in 2 days removed the stem and inserted it directly into the existing burner valve. Perfect fit easy installation and burner works as it should. Simply repair and I probably saved $100 by not calling a repair tech to come to my home.
Read more
More
$138.37
- Compare At:
-
$166.04
- You Save:
-
$27.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196037
This front leveling leg adjusts the height at the front of your appliance to keep it level and steady. Replacing a worn or missing foot helps eliminate rocking, protect floors, and make fine leveling adjustments simple.
- Threads into the base at the front corner to raise or lower the unit for accurate leveling
- Stabilizes the appliance to minimize rocking and vibration when opening the door or using the cooktop
- Restores proper adjustment when the original foot is stripped, bent, or missing
- Common signs include a wobbling appliance, difficulty leveling, or metal-to-floor contact/scuffing
Includes: 1 front leveling leg. Install notes:
- Disconnect power; turn off the gas supply
- Protect the floor and use an assistant to carefully slide and tip the appliance
- Start the new leg by hand to avoid cross-threading; finish adjustment with a wrench
- Level front-to-back and side-to-side, then verify stability before restoring service
Do-It-Yourself Stories from Customers like You
Broken foot Jeffrey J. • Greensburg , IN • July 29, 2016
Replaced
Read more
More
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10330077
This is a glass door outer panel assembly that has been manufactured by Whirlpool for use with ovens. The glass door outer panel assembly contains everything needed to replace a broken or deteriorated door. The door needs to be in proper working order to keep heat-sealed inside the oven, as well as allow the user to easily access the oven. Over time, this part could become dented, bent, scratched, cracked, or otherwise rendered ineffective, requiring replacement. This part may require two people to install as it is heavy. Unplug the oven and allow it to cool down entirely before attempting any repairs.As a genuine OEM part, this part has been sourced directly from the manufacturer and is only sold individually. This glass door outer panel assembly is manufactured from high quality and durable materials to ensure sturdiness. It is intended for use with ovens and ranges manufactured by Whirlpool, Maytag, Kitchenaid, Amana, and Magic Chef.
Do-It-Yourself Stories from Customers like You
Glass on oven door shattered Linda *. • Kirbyville , TX • January 16, 2017
We found a video on how to change out the glass and looked fairly easy. My husband, being the skeptic that he is, wasn't on board as readily as I was but we tried it regardless. To his surprise in about 30 minutes we did it! So easy and a big thanks to Appliances Parts Pros for the part. We had the new part in 1 1/2 days...I was expecting it to be delivered in 5 days! This is not the first time doing business with them and I will continue to do so. Great company!!
Read more
More
$206.69
- Compare At:
-
$245.96
- You Save:
-
$39.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196174
This machine-thread screw secures brackets, panels, and trim inside your appliance. Replacing a missing or stripped fastener restores a tight fit, reduces rattles, and keeps assemblies properly aligned. What it does:
- 10-32 machine-thread screw used to fasten metal components
- Maintains alignment and stability of panels, brackets, and trim
- Replace if threads are stripped, head is damaged, corroded, or missing
- Common symptoms: loose panel/handle, vibration noises, gaps or misalignment
What's included:
Install notes:
- Disconnect power (and gas, if applicable) before servicing
- Support the component and start threads by hand to avoid cross-threading
- Use the correct driver; do not overtighten to prevent stripping
- Match thread size and length specified for your model
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196557
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
- Fastens brackets, panels, trim, or components to the appliance chassis
- Helps correct loose or missing hardware after vibration or service
- Replaces stripped, rusted, or broken screws
- Can reduce rattling noises or misaligned parts caused by missing fasteners
What's included: One screw Install notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Support the part being fastened; start threads by hand to avoid cross-threading
- Use the correct driver size; tighten snugly without overtightening
- Replace hardware with the exact part number to ensure proper fit
Do-It-Yourself Stories from Customers like You
Water dispenser was no longer working Kelly W. • Houston , TX • January 24, 2017
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3191898
Color: black. Small size. Measures about 2-1/2 inches in diameter.
Do-It-Yourself Stories from Customers like You
The burner cap was lost when we moved Michael W. • Cleveland , OH • October 27, 2014
We gave ApplianceParts the model# of the stove they checked their inventory they had the Burner Cap in the right color we ordered it and it arrived in three days, it was the exact replacement.
Read more
More
$55.95
- Compare At:
-
$67.14
- You Save:
-
$11.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4449743
This ground screw secures the appliance's grounding wire or strap to the chassis or terminal area, creating a reliable bonding point. Replace a missing or damaged screw to restore a proper ground connection during installation or service.
- Provides the designated bonding point for the grounding wire/strap
- Fastens to the frame or terminal area using 8-32 machine threads
- Helps maintain a consistent ground path for safe operation
- Typical reasons to replace: stripped head/threads, corrosion, or a missing screw
What's included: 1 ground screw Install notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Route the ground wire/strap to the specified grounding location
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Ensure the ground connection is secure and complies with local electrical codes before restoring power
Do-It-Yourself Stories from Customers like You
Oven glass Michael S. • Yuma , AZ • November 02, 2015
Replaced glass and missing screws. Hardest part was removing the old glass because of the double sided tape.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 814381
Kit includes 4 pins.
Do-It-Yourself Stories from Customers like You
Upper cooling blower was making loud noise no error code Raymond M. • Mundelein , IL • February 06, 2016
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary.
IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8523178
Color: Biscuit.
Do-It-Yourself Stories from Customers like You
I broke two trim pieces taking the oven door apart to clean it since i was ordering to side trim pieces i decided to replace the bottom door trim piece as well since it was bent and rusty Jennifer W. • Richmond , CA • July 19, 2016
The hardest part of this repair was a) realizing that the easiest way to clean the oven door pieces is to remove the whole door and b) figuring out how to put the oven door back on. Doing (b) is infinitely easier if you stick two allen wrenches into the holes in the door hinge, but these holes ONLY appear when the door is fully open. Prop the hinges open BEFORE you remove the door.
As many posters online will tell you, it is easy to remove the oven door but hard to put it back on. It...
Read more
More
$67.68
- Compare At:
-
$79.86
- You Save:
-
$12.18
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98008545
Color: Black. For biscuit order 98008169. For white order WP98008544.
Do-It-Yourself Stories from Customers like You
Missing screws and bad sealing door gasket Thomas P. • Palmdale , CA • December 15, 2015
Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises.
Read more
More
$7.95
- Compare At:
-
$10.99
- You Save:
-
$3.04
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392899
Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.
Do-It-Yourself Stories from Customers like You
Lack of accurate control on 2 electric range burners Jeff D. • Neenah , WI • April 09, 2016
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job.
The fix only took about 15 minutes because I was prepared after watching the video.
Read more
More
$17.76
- Compare At:
-
$21.31
- You Save:
-
$3.55