Kenmore Cooktop 790.31013600 (79031013600, 790 31013600) Parts

Genuine Frigidaire part

Skirt

By: Frigidaire

Part Number: 316264803

Do-It-Yourself Stories from Customers like You Burner skirt rusted out on kenmore cooktop Terry S. • Evanston , IL • May 20, 2015

This should be an easy 5 minute three screws out and three screws back in job....but on older stuff it's never easy is it? The screws that hold the skirt on my burner were, like the skirt, rusted solid and despite soaking with PB-1 Blaster they just broke off when I tried to remove them. You can't effectively drill out the remains of the broken screws either (well I couldn't) because the part they screw into is a soft alloy and the screws are hard so the bit wanders off center and if the hole... Read more

Genuine Frigidaire part

Cap

By: Frigidaire

Part Number: 316271904

Genuine Frigidaire part

Bushing

5.0 (1)

By: Frigidaire

Part Number: 318146301

Do-It-Yourself Stories from Customers like You Bushing had been damaged Lynda H. • Chattanooga , TN • March 11, 2017

Very easy fix. I couldn't find the part number so actually ordered this part just by looking at the picture. Fortunately I guessed right and the part was exactly what I needed. I just had to slip the part over the part that holds the temperature control knob on my gas cook top. I received the part the next day after I ordered it! Very satisfied. Read more

Genuine Frigidaire part

Ignitor Orifice Assembly

By: Frigidaire

Part Number: 318221343

Genuine Frigidaire part

Wiring Harness

By: Frigidaire

Part Number: 318232612

Genuine Frigidaire part

Valve,Top Burner,9500 Btu

By: Frigidaire

Part Number: 318233910

Genuine Frigidaire part

Valve,Top Burner,17000 Btu

By: Frigidaire

Part Number: 318233940

Genuine Frigidaire part

Bracket Lock Screw

By: Frigidaire

Part Number: 5303285443

This is an authentic OEM replacement bracket locking screw sourced directly from the manufacturer for use on range tops. The stovetop bracket is attached to the stovetop and the stove body. This locking screw is a fully threaded 2.1-inch screw. If this screw becomes loose or rusted, it should be removed and replaced to ensure the stovetop remains fully seated and in good working condition. If the screw is missing, the stovetop bracket will not be fully functional, and the stovetop could become loose. To start, disconnect the power and gas from the unit before replacing the screw on the bracket. Make certain the stove burners are not hot. Remove the burner grates, burner caps, and control knobs. Lift the range top cover. Locate the mounting bracket on the wall unit. If the screw is in the bracket but has rusted, use a screwdriver to remove the missing screw. Set the nut aside for use on the new screw. Install the new screw and the nut from the last screw. Check the bracket alignment before tightening the screw. Tighten the screw to the nut. Lower the stovetop and reconnect the power and gas. This bracket locking screw is a heavy-duty 2.1-inch silver metal screw. It is designed for use on gas ranges manufactured by Frigidaire, Kenmore, Electrolux, and Crosley.

Genuine Frigidaire part

Range Gas Pressure Regulator

5.0 (2)

By: Frigidaire

Part Number: 5308007974

Controls gas flow to range burners. Replace if regulator is worn, leaking, or damaged to restore proper gas delivery and maintain safe operation.

Do-It-Yourself Stories from Customers like You Cook top burners took a long time to light after ignitors activated gas slow to start flowing Harlan L. • Fort Mohave , AZ • January 24, 2015

Researched online for a solution and found someone who described a similar problem. Their solution was to replace the gas pressure regulator. So I decided to order one and try it. Easy to replace in my case - less than 30 minutes. It SOLVED the problem. Burners light almost immediately now! Saved the cost of a service call and the prospect of replacing the entire cook top. Read more

Genuine Frigidaire part

Black Burner Cap Kit

4.8 (4)

By: Frigidaire

Part Number: 5304507219

Do-It-Yourself Stories from Customers like You Grates and visible top portions of our gas stove were aged stained and deteriorating we wanted to improve thr cosmetic appearance of the stove prior to selljng oir house Patty C. • Centerville , GA • March 06, 2016

We ordered new grates, burner pans, and gas caps for all burners. Read more