Kenmore Range 790.45262501 (79045262501, 790 45262501) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935058
This OEM replacement Universal Element Receptacle kit is designed to fit most popular range brands such as Maytag, Magic Chef, Jenn Air, Whirlpool, Roper, Kenmore, Frigidaire, Admiral, Crosley, Estate, and Amana. This kit comes complete with everything you need for a hassle-free installation.
Included in the Kit:
- Two different mounting brackets
- A plastic terminal block
- Wires
- Hi-temp wire connectors
- heat insulators
In case your oven or range is displaying any of the following signs: non-heating burners, malfunctioning heating elements, burning odor, or a buzzing sound, this kit could be the answer to the problem. To replace the kit, you would require specific tools such as wire strippers, a heat gun or hair dryer, and a #1 square-head screwdriver.
This part fixes the following symptoms
-
Element will not heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
The large front burner on my range was not working Sandra T. • Spanaway , WA • June 17, 2014
The receptacle that held the burner element in place was broken so the burner would not make a connection and heat up. I ordered the receptacle kit. There was even an online video that showed how to make the repair. It just took a screwdriver and wire cutters and about 15 minutes and the job was done. The burner works great.
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 316217002
The Oven Temperature Probe is an OEM part for Frigidaire ovens. This part monitors the oven's internal temperature, ensuring that it accurately reflects the set temperature on the oven's control. By measuring the heat inside the oven, the temperature probe helps in maintaining consistent cooking results, preventing undercooking or overcooking of food.
Over time, the oven temperature probe can fail or become inaccurate due to wear and tear, exposure to extreme temperatures, or damage from cleaning and handling. This can lead to uneven cooking results, with food being overcooked or undercooked, despite setting the oven to the correct temperature.
Symptoms of a bad Oven Temperature Probe include:
- Oven not reaching the set temperature
- Oven temperature fluctuating more than usual
- Food not cooking evenly or within expected time frames
- Error codes displayed on the oven indicating a temperature sensor issue
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Oven not heating evenly
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Error code F10 Dan H. • Culver City , CA • December 27, 2019
Bought a used Frigidaire 36 inch stove. The broiler didn't come on but the burners lit and the stove worked so I made do for about 4 or 5 years with that. Then the F10 code came up and it wouldn't stop beeping until I unplugged it. I figured the electronics/circuit board was probably bad and ordered a replacement. I was confused about what part to order. The parts list includes "Control Panel" and "Clock - Timer". Turns out the control panels are the glass panel on the front of the stove...
Read more
More
$53.42
- Compare At:
-
$63.57
- You Save:
-
$10.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 316442301
The Coil Surface Element is an OEM part for Frigidaire ranges and cooktops. It is a key component for cooking, providing the heat source directly under pots and pans. This 8 inch element is designed to heat quickly and maintain consistent temperature, which is essential for effective cooking and energy efficiency.
Symptoms of a bad Coil Surface Element include:
- The element not heating up when turned on
- Uneven heating or hot spots that can cause inconsistent cooking results
- The element not turning off or fluctuating in temperature
Causes of a bad coil surface element can include a breakdown of the coil itself due to general wear and tear, electrical connections becoming loose or corroded, or damage from spills or impacts during cooking.
This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My frigidaire surface element was burnt out Dong N. • Monterey , CA • November 09, 2014
I went to a local stove parts store to find a replacement. The store ordered the element for me and promised that it would arrive the next day. I waited for seven 'working' days,but the part never came. So I went online, and found the part in AppliancePartsPros.com. I ordered it in the evening of November 5, 2014, and the part was delivered the next day, November 6 at 11.08AM!
Fantastic! I don't know how they could deliver that fast. But clearly, nobody could beat that service.
The part fits...
Read more
More
$39.18
- Compare At:
-
$43.10
- You Save:
-
$3.92
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255006
The Heating Element is an OEM part for Frigidaire ovens and ranges. It is responsible for providing the heat necessary for baking or broiling. The element converts electrical energy into heat through resistance; this heat is then distributed throughout the oven cavity to cook or bake food evenly.
Common causes of a bad Heating Element can include visible signs of damage like blistering, bulging, or breakage. A burnout may occur when the element overheats and fails, leading to no heat production. Additionally, electrical issues like a blown fuse or faulty wiring can prevent the element from receiving power.
Symptoms of a bad Heating Element include:
- The oven does not heat up
- Uneven cooking or baking
- Longer cooking times than usual
- The element not glowing when the oven is turned on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
My oven stopped working properly on convection roast setting was was only heating up to about 200 degrees Mark R. • Eastham , MA • May 15, 2015
One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it...
Read more
More
$146.95
- Compare At:
-
$176.34
- You Save:
-
$29.39
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 318372211
The Coil Burner Element is an OEM replacement part for Frigidaire cooktops and ranges. The 6-inch coil burner element typically consists of a spiral-shaped metal resistance wire or rod that glows red-hot when electricity passes through it. This heat is then transferred to the cooktop surface, allowing it to reach the desired temperature for various cooking tasks, such as boiling, simmering, or sautéing.
Symptoms of a bad coil burner element:
- Burner not heating up properly or failing to reach the desired temperature
- Uneven heating or hot spots on the cooktop surface
- Visible damage or breaks in the coil wire
- Unusual smells or burning odors emanating from the burner area
Causes of a bad coil burner element can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore cooktops and ranges.
Do-It-Yourself Stories from Customers like You
Needed new burners and drip pans John V. • Houston , TX • February 22, 2016
Ordered on Wed, received on Fri. Took less than 5 minutes to replace all 4. No tools needed.
Read more
More
$40.44
- Compare At:
-
$48.12
- You Save:
-
$7.68
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304409888
The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.
Symptoms of a bad Terminal Block Kit include:
- Signs of burning or melting at the connection points,
- Flickering power or intermittent operation of the appliance,
- A burning smell from the appliance area.
Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Turns out it is the control panel but the terminal block was broken as well Patricia R. • Calera , AL • April 16, 2015
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly.
Read more
More
$15.95
- Compare At:
-
$18.82
- You Save:
-
$2.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255605
The Broil Element is an OEM part for Frigidaire ovens and ranges. It is specifically designed to provide the high heat necessary for broiling food, such as meats and vegetables. Located at the top of the oven interior, the broil element radiates heat downwards, creating a high-temperature environment ideal for browning and caramelizing the exterior of dishes while locking in juices.
Over time, the broil element can burn out or become damaged due to high temperatures and frequent use.
Symptoms of a bad Broil Element include:
- Lack of heat when broiling
- Uneven cooking or browning of food
- Visible damage or breaks in the element
- No visible glow from the element during operation
This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.
This part fixes the following symptoms
-
Element will not heat
-
Little to no heat when broiling
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$128.95
- Compare At:
-
$152.16
- You Save:
-
$23.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 903136-9020
The Surface Burner Infinite Switch is an OEM part for Frigidaire ranges. This switch is responsible for controlling the heat output of the surface burners on your range. By adjusting the infinite switch, you can set the burner to different heat levels, allowing for precise cooking control.
Common causes of a bad infinite switch include electrical failures, internal component wear, or physical damage to the switch mechanism.
Symptoms of a bad surface burner infinite switch include:
- Burner not heating up
- Burner only working at one heat level
- Burner not turning off
- Inconsistent or fluctuating heat levels
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Burner was hard to turn on/off and almost impossible to adjust Clark A. • Austin , TX • September 01, 2014
The problem seemed to be with the switch so I watched a few youtube videos to learn more about how ranges work. After locating the correct replacement switch I ordered it on-line around 10 pm Tuesday night. The new switch arrived Thursday morning at about 10 am and I had my range back up and working like new in less that 30 minutes.
The hardest part was figuring out how to remove the slide in panel to access the switch. There were plastic washer/nuts behind each know which I was able to...
Read more
More
$78.41
- Compare At:
-
$93.31
- You Save:
-
$14.90
Genuine Frigidaire part
By: Frigidaire
Part Number: 903136-9010
The Switch is an OEM part for Frigidaire ovens. This component is responsible for controlling the flow of electricity to various functions of the oven, such as the bake and broil elements, ensuring the oven operates correctly according to the selected settings.
Causes of a bad switch can include wear and tear from frequent use, electrical surges, or physical damage from impact or exposure to moisture.
Symptoms of a bad switch include:
- The oven not turning on or responding to control inputs
- Inconsistent heating or temperature control issues
- Certain oven functions not working, such as the bake or broil elements
- The switch feeling loose or sticking when turned
This OEM replacement is also compatible with Electrolux, Gibson, Tappan, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Burner switch was not turning the burner off Mary K. • Dublin , GA • July 13, 2014
We cut the power, took the control panel off, got the burner switch number from the original part, and ordered a new one. We were a little worried at that point, because your website offered a "replacement" part, with a different number than the original. However, we put the model number into your double check feature and were assured that we were getting the right part. The part arrived in two days and frankly we were still worried, because the new part was slightly larger than the original....
Read more
More
$72.71
- Compare At:
-
$86.52
- You Save:
-
$13.81
Genuine Frigidaire part
By: Frigidaire
Part Number: 316443601
The Wall Oven Handle is an OEM part for Frigidaire ovens. It serves as the primary means of opening and closing the oven door, providing a secure grip and easy access to the interior cavity.
A faulty or damaged oven handle can make it difficult or even dangerous to operate the appliance. Causes of a bad handle can include excessive force or strain during opening and closing, exposure to high temperatures that can weaken or warp the material, or simply wear and tear over time.
Symptoms of a faulty Wall Oven Handle include:
- Difficulty opening or closing the oven door smoothly
- Loose or wobbly handle that feels unstable when gripped
- Cracks, chips, or other visible damage to the handle material
- Sharp edges or rough surfaces that can cause discomfort or injury
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore wall oven models.
Do-It-Yourself Stories from Customers like You
Screws stripped out in handle Thom P. • Palm Coast , FL • October 17, 2016
Replaced with new part
Read more
More
$93.50
- Compare At:
-
$112.20
- You Save:
-
$18.70
Genuine Frigidaire part
By: Frigidaire
Part Number: 316116400
The Oven Light Socket is an OEM replacement part for Frigidaire electric ranges and wall ovens. It houses the bulb that illuminates the interior of the oven cavity.
Causes of a bad light socket can include a loose or broken connection due to regular use, scorched or burnt terminals from overheating, or damage from moisture.
Symptoms of a bad light socket include:
- The oven light not turning on when activated
- Flickering or intermittent bulb operation
- Signs of corrosion or oxidation around the bulb base
- Excessive heat emission from the light area
This OEM Frigidaire replacement part is also compatible with ranges and wall ovens from Electrolux, Gibson, and Kelvinator.
Do-It-Yourself Stories from Customers like You
Light socket inside oven broke Linda S. • Novato , CA • June 02, 2015
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm!
Read more
More
$51.23
- Compare At:
-
$61.48
- You Save:
-
$10.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304527842
The Switch Rocker is an OEM part for Frigidaire ranges. This switch is used to control various functions of the range, such as turning on heating elements or activating specific cooking modes. It provides a reliable and straightforward interface for managing the range's features.
You should replace the range switch rocker if it becomes faulty. Causes of a bad switch rocker can include wear and tear from frequent use, exposure to high temperatures, electrical malfunctions, or physical damage from impacts or mishandling. A defective switch rocker can result in unresponsive controls, making it challenging to operate the range effectively.
Symptoms of a bad Range Switch Rocker include:
- The switch not responding when pressed
- Inconsistent or flickering performance of the heating elements
- Physical damage or looseness in the switch
- Intermittent operation or complete failure to activate the desired function
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The rocker switch for to adjust the size of the heating element for the stove broke as well as the rocker switch to adjust the oven light broke Benjamin G. • West Sacramento , CA • January 07, 2017
I purchased 2 new light rocker switches, Because the heating element rocker switch was unavailable. First I removed the power source for safety. Then I simply pulled each switch out individually with a flathead screwdriver for leverage. I simply unplugged the wires from the old rocker switch, discarded the old rocker, plugged the wires into the new rocker switch, and pushed the new switch appropriately back into the control panel. I used the same steps for both rocker switches. Once...
Read more
More
$15.50
- Compare At:
-
$18.60
- You Save:
-
$3.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303288565
This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.
- Fastens the switch body to a bracket or chassis panel
- Helps keep the switch aligned for consistent actuation
- Replaces stripped, corroded, or missing mounting hardware
- Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area
What's included: 1 truss-head machine screw (#8-32 x 3/16) Install notes:
- Disconnect power to the appliance before servicing
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Verify thread size and length match the original hardware
- If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
$6.95
- Compare At:
-
$12.93
- You Save:
-
$5.98
Genuine Frigidaire part
By: Frigidaire
Part Number: L304458797
These chrome drip bowls sit beneath coil surface elements to catch spills and reflect heat. Sized for 8-inch and 6-inch burners, they refresh the cooktop's appearance and help elements seat correctly. What it does:
- Collects drips and splatters under coil elements and reflects heat back toward cookware
- Restores a clean look when originals are stained, pitted, or rusted
- Helps burners sit level and make solid contact with the cooktop
- Common signs to replace: heavy discoloration, rust, broken tabs, warping, lingering smoke or odor from burnt-on spills
What's included:
- Two chrome drip bowls: one 8-inch and one 6-inch
Install notes:
- Disconnect power at the breaker and allow surface units to cool completely
- Pull the coil element straight out of its receptacle, then lift out the old bowl
- Align the new bowl's notches with the cooktop opening and seat it flat
- Reinsert the element fully and ensure it rests evenly in the bowl
Do-It-Yourself Stories from Customers like You
Needed new knobs and drip pans William S. • Buffalo , MN • October 30, 2016
It was very simple, pulled the knobs off and replaced them and pulled the drip pans and put the new ones in.
Read more
More
$44.35
- Compare At:
-
$52.78
- You Save:
-
$8.43
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303274292
This clip secures the appliance's terminal block to the chassis, keeping wiring stable and preventing strain on electrical connections. It's a small, durable mounting clip used where the terminal block needs a fast, reliable hold. What it does:
- Holds the terminal block firmly to the appliance frame to reduce wire movement and wear
- Helps maintain safe, stable electrical connections by preventing strain on terminal wires
- Prevents the terminal block from shifting during use or service
- Compatible with standard terminal block locations that use a push-in or snap-mount clip
What's included:
- One terminal block mounting clip
Install notes:
- Always disconnect power before accessing or servicing electrical components
- Remove access panels and locate the terminal block; clip typically snaps into a chassis slot or aligns with an existing mounting boss
- Handle wiring and terminals gently to avoid loosening connections; verify all wires are secure after reinstall
Do-It-Yourself Stories from Customers like You
Stove top burner would not stay in terminal block Eric M. • Fairfield , IA • September 06, 2015
First, bought new terminal block , ID with wire color..
Second, found out new terminal block has different
mounting protrusions than old bracket.
Third, Bought new style bracket that fit new protrusion
design of terminal block
Had to drill out screw holding bracket onto stove top
as the phillips was stripped out.
Problem Solved!
Read more
More
$37.95
- Compare At:
-
$45.54
- You Save:
-
$7.59