Kenmore Range 790.90811405 (79090811405, 790 90811405) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436001
The Large Surface Element Switch is an OEM replacement part for Frigidaire ranges and cooktops. It is a component that controls the power and temperature settings for one of the larger surface heating elements on the appliance.
Symptoms of a faulty Large Surface Element Switch include:
- Difficulty in adjusting or maintaining consistent heat settings
- The surface element not heating up or cycling on and off unexpectedly
- Flickering or erratic behavior of the surface element
- Burning smell or visible signs of overheating
Causes of a bad large surface element switch can include normal wear and tear, exposure to excessive heat or moisture, or electrical malfunctions.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore range and cooktop models.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The front left element (8 inch) would stay hot on lower control settings. Michael S. • West Seneca , NY • September 13, 2022
After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty.
One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove...
Read more
More
$34.57
- Compare At:
-
$41.14
- You Save:
-
$6.57
Genuine Frigidaire part
By: Frigidaire
Part Number: 316048413
The Large Chrome Drip Pan is an OEM replacement part for Frigidaire cooktops, designed to fit beneath the burner elements. It is responsible for providing a clean surface and maintain cleanliness. The drip pan catches spills and drips that occur during cooking, preventing them from reaching the interior of the stove where they can become burnt-on and difficult to clean. This large chrome drip pan measures approximately 8 inches in diameter.
Causes of a bad drip pan can include frequent exposure to high heat, spills, and regular cleaning, which can lead to discoloration, warping, or rust over time. When the drip pan becomes damaged or worn out, it may no longer effectively catch spills or reflect heat, affecting both cleanliness and cooking performance.
Symptoms of a bad part include:
- Visible signs of damage, wear, rust, or corrosion on the drip pan
- Uneven stove element
- Difficulty cleaning spills and grease accumulating on the pan
- Unsightly appearance of the stove
- Difficulty cleaning the stove surface
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The drip pans on my electric range were old and would not clean up i bought replacements at walmart but their universal did not fit properly r Charles C. • Fair Play , MO • September 21, 2014
I googled "drip pans for electric range" and came upon your web site as well as some others. After looking at three or four I decided to go with your company. The choices clearly described the pans available so I didn't have to guess which one would fit. The price was very good and they arrive in the mail two days after I ordered them. The drip pans fit perfectly. Thank you.
Charles Cummings
Read more
More
$11.45
- Compare At:
-
$13.74
- You Save:
-
$2.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935058
This OEM replacement Universal Element Receptacle kit is designed to fit most popular range brands such as Maytag, Magic Chef, Jenn Air, Whirlpool, Roper, Kenmore, Frigidaire, Admiral, Crosley, Estate, and Amana. This kit comes complete with everything you need for a hassle-free installation.
Included in the Kit:
- Two different mounting brackets
- A plastic terminal block
- Wires
- Hi-temp wire connectors
- heat insulators
In case your oven or range is displaying any of the following signs: non-heating burners, malfunctioning heating elements, burning odor, or a buzzing sound, this kit could be the answer to the problem. To replace the kit, you would require specific tools such as wire strippers, a heat gun or hair dryer, and a #1 square-head screwdriver.
This part fixes the following symptoms
-
Element will not heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
The large front burner on my range was not working Sandra T. • Spanaway , WA • June 17, 2014
The receptacle that held the burner element in place was broken so the burner would not make a connection and heat up. I ordered the receptacle kit. There was even an online video that showed how to make the repair. It just took a screwdriver and wire cutters and about 15 minutes and the job was done. The burner works great.
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 316442301
The Coil Surface Element is an OEM part for Frigidaire ranges and cooktops. It is a key component for cooking, providing the heat source directly under pots and pans. This 8 inch element is designed to heat quickly and maintain consistent temperature, which is essential for effective cooking and energy efficiency.
Symptoms of a bad Coil Surface Element include:
- The element not heating up when turned on
- Uneven heating or hot spots that can cause inconsistent cooking results
- The element not turning off or fluctuating in temperature
Causes of a bad coil surface element can include a breakdown of the coil itself due to general wear and tear, electrical connections becoming loose or corroded, or damage from spills or impacts during cooking.
This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My frigidaire surface element was burnt out Dong N. • Monterey , CA • November 09, 2014
I went to a local stove parts store to find a replacement. The store ordered the element for me and promised that it would arrive the next day. I waited for seven 'working' days,but the part never came. So I went online, and found the part in AppliancePartsPros.com. I ordered it in the evening of November 5, 2014, and the part was delivered the next day, November 6 at 11.08AM!
Fantastic! I don't know how they could deliver that fast. But clearly, nobody could beat that service.
The part fits...
Read more
More
$39.18
- Compare At:
-
$43.10
- You Save:
-
$3.92
Genuine Frigidaire part
By: Frigidaire
Part Number: 316233903
The Oven Temperature Sensor is an OEM part for Frigidaire ovens. It monitors and regulates the oven's temperature by sending accurate temperature readings to the control board. This ensures that the oven maintains the desired cooking temperature throughout the baking or roasting process.
Causes of a bad oven temperature sensor include exposure to high heat over extended periods, electrical issues, or physical damage to the sensor probe.
Symptoms of a bad oven temperature sensor include:
- Incorrect oven temperatures
- Overheating or underheating during use
- Erratic temperature readings
- The oven not reaching the set temperature
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
No heat Regina L. • Rockvillecentre , NY • October 16, 2014
Removed and replaced
Read more
More
$24.31
- Compare At:
-
$26.54
- You Save:
-
$2.23
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436000
The Small Surface Element Switch is an OEM replacement part for Frigidaire electric ranges. It serves as the control knob and circuitry to safely power one of the smaller cooking elements.
Symptoms of a bad surface element switch include:
- Inability to ignite or regulate heating for its assigned zone
- Switch knob that feels loose, won't click smoothly, or won't stay set
- Intermittent or unreliable power to the smaller element coils
- Tripped circuit breakers upon use that don't reset
Causes relate to thousands of rotations wearing micro-switches and wiring terminals within the control assembly. Regular cleaning around knobs can prevent accelerated deterioration from baked-on debris conducting excess heat.
This genuine OEM replacement part is compatible with other brands including Electrolux and Kenmore as well.
Do-It-Yourself Stories from Customers like You
Surface switches not operating properly; going from cool to very hot etc Guy G. • Guthrie , OK • October 10, 2014
Replaced all four element switches. Switches arrived within two days of ordering. That's about normal for AppliancePartsPros. They were the correct ones; not generic, and fit the original control knobs perfectly. This kind of service is what I'm used to from ApplicanePartsPros.
Read more
More
$62.64
- Compare At:
-
$73.92
- You Save:
-
$11.28
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304518660
The Clock is an OEM part for Frigidaire ovens and ranges. It is the central electronic component that regulates and monitors oven functions such as bake, broil, convection, temperature controls, and timers.
Causes can be failures in the integrated circuitry, damaged connectors or traces on the board, or water or other environmental damage over time.
Symptoms of a clock include:
- Failure of oven elements to heat properly
- Unresponsive or inaccurate temperature displays
- Irregular timed baking or errors flashing
- Problems with convection or baking modes
- Power issues such as the oven not turning on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Bake element and broil element did not heat Larry H. • Kansas City , MO • November 25, 2016
I first felt along each heating element (bake and broil) hoping to find a rough or blistered place on them. But they were both smooth with no irregular places. (replacing the elements would have been the easiest and cheapest repair.
Pulled the back off the range (unplugged, of course) - checked wiring. There were no loose connections or burned wiring. I disconnected the elements and checked them with a ohmmeter (VOM) and both had continuity. Discovered that both elements used the same...
Read more
More
$82.95
- Compare At:
-
$117.10
- You Save:
-
$34.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 3051162
The Front Drawer Glide is an OEM replacement part for Frigidaire ranges and ovens. It facilitates the smooth opening and closing of the storage drawer typically located at the bottom of the range.
Symptoms of a faulty Front Drawer Glide include:
- Difficulty in opening or closing the drawer smoothly
- The drawer becoming stuck or jammed in its track
- Excessive noise or grinding sounds when operating the drawer
- Visible signs of wear, damage, or misalignment in the glide mechanism
Causes of needing to replace the front drawer glide can include normal wear and tear over time, physical impact or mishandling, or exposure to excessive heat or moisture.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore range and oven models.
Do-It-Yourself Stories from Customers like You
Broken glides on my range drawer John H. • Shelton , WA • September 19, 2014
Replaced guides
Read more
More
$6.95
- Compare At:
-
$8.20
- You Save:
-
$1.25
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 3051163
The Rear Drawer Glide is an OEM part for Frigidaire ovens and ranges. It is designed to provide smooth movement for the oven's rear drawer. The rear drawer glide allows the drawer to slide in and out with ease, providing convenient access to storage space or broiler pans. This is the glide that attaches to the rear of the oven drawer. For front glide that attaches to the body use 3051162. Two front and two rear are used for each stove. One for each corner.
Causes of a bad rear drawer glide can include normal wear and tear over time or accidental damage. When the glide becomes defective, it can lead to difficulties in smoothly opening or closing the drawer.
Symptoms of a bad rear drawer glide include:
- Difficulty in sliding the drawer in or out.
- Uneven movements or sticking of the drawer.
- Excessive noise or scraping sounds when operating the drawer.
- The drawer not staying securely closed or aligned.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Stove top worked. No power to oven or broiler. Samuel C. • Monroe , GA • February 18, 2019
First off, shipping was ridiculously fast. Ordered at 3:30pm EST, shipped same day, and arrived at my house by 10:30am the following day. This was with standard shipping. Granted, the package only was delivered from one state away, but WOW, was not expecting that.
Replacement of the control board was much easier than I expected. I truly had it fixed in 15 minutes. The video was pretty much spot on. I user a single edged razor blade to carefully go around the edge of the overlay and remove it...
Read more
More
$7.95
- Compare At:
-
$12.43
- You Save:
-
$4.48
Genuine Frigidaire part
By: Frigidaire
Part Number: 316220729
The Range Overlay is an OEM part for Frigidaire ranges. This part serves as a protective and decorative cover for the control panel, providing clear markings for the various buttons and settings. It's essential for ensuring users can accurately select and monitor cooking settings, contributing to the usability and functionality of the range.
Causes of damage to the range overlay can range from excessive cleaning, use of harsh chemicals, to simple wear and tear over time.
Symptoms of a bad Range Overlay include:
- Fading or wear of the markings, making it difficult to read settings.
- Peeling or bubbling of the overlay material.
- Damage or tears that interfere with the function or aesthetics of the control panel.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bake element and broil element did not heat Larry H. • Kansas City , MO • November 25, 2016
I first felt along each heating element (bake and broil) hoping to find a rough or blistered place on them. But they were both smooth with no irregular places. (replacing the elements would have been the easiest and cheapest repair.
Pulled the back off the range (unplugged, of course) - checked wiring. There were no loose connections or burned wiring. I disconnected the elements and checked them with a ohmmeter (VOM) and both had continuity. Discovered that both elements used the same...
Read more
More
$32.95
- Compare At:
-
$38.88
- You Save:
-
$5.93
Genuine Frigidaire part
By: Frigidaire
Part Number: 316225001
The Oven Baking Element is an OEM part for Frigidaire ovens. It is responsible for providing the necessary heat for baking and roasting by converting electrical energy into heat within the oven cavity. The baking element measures approximately 19.4 x 18.5 inches.
You should replace this baking element if it stops functioning properly, which can occur due to wear and tear over time, electrical malfunctions, or physical damage to the element.
Symptoms of a bad oven baking element include:
- The oven not heating up properly or at all
- Uneven baking or roasting results
- Visible damage such as breaks or burn marks on the element
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Broken element Ted C. • Gloucester , MA • May 09, 2014
Replaced with new
Read more
More
$120.95
- Compare At:
-
$143.93
- You Save:
-
$22.98
Genuine Frigidaire part
By: Frigidaire
Part Number: 316203200
The Broil Element is an OEM replacement part for Frigidaire ovens. It is located at the top of the oven cavity and is responsible for providing the high heat required for broiling. This element heats up quickly and evenly to cook food from above, giving it a crisp and browned finish.
Over time, the broil element can degrade due to the high temperatures it operates under, as well as normal wear and tear from repeated use. Electrical surges or physical damage from cleaning or moving oven racks can also cause the element to fail. These factors can lead to the element no longer heating up properly or becoming completely non-functional.
Symptoms of a bad broil element include:
- The broiler not heating up or heating unevenly
- Visible signs of damage such as burns, blisters, or breaks in the element
- Sparking or unusual noises when attempting to use the broiler
- The oven taking longer to broil food or not achieving the desired browning effect
- The element not glowing red-hot during operation
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven wouldn't heat up Danielle B. • Virginia Beach , VA • March 17, 2015
Removed the bake element and broil element. Tested them with a multi meter. They failed. Ordered new elements. Received them in 2 days. Installed new elements. Oven works great. Entire fix took 10 minutes to remove and test elements, 10 minutes to install the new elements. It was my first time working on an appliance, the instruction videos were great!
Read more
More
$117.95
- Compare At:
-
$140.36
- You Save:
-
$22.41
Genuine Frigidaire part
By: Frigidaire
Part Number: 318372211
The Coil Burner Element is an OEM replacement part for Frigidaire cooktops and ranges. The 6-inch coil burner element typically consists of a spiral-shaped metal resistance wire or rod that glows red-hot when electricity passes through it. This heat is then transferred to the cooktop surface, allowing it to reach the desired temperature for various cooking tasks, such as boiling, simmering, or sautéing.
Symptoms of a bad coil burner element:
- Burner not heating up properly or failing to reach the desired temperature
- Uneven heating or hot spots on the cooktop surface
- Visible damage or breaks in the coil wire
- Unusual smells or burning odors emanating from the burner area
Causes of a bad coil burner element can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore cooktops and ranges.
Do-It-Yourself Stories from Customers like You
Needed new burners and drip pans John V. • Houston , TX • February 22, 2016
Ordered on Wed, received on Fri. Took less than 5 minutes to replace all 4. No tools needed.
Read more
More
$40.44
- Compare At:
-
$48.12
- You Save:
-
$7.68
Genuine Frigidaire part
By: Frigidaire
Part Number: 316433300
The Handle Mounting Screw is an OEM part for Frigidaire ranges. This screw secures the handle to the oven door, ensuring it remains firmly attached and allows for easy opening and closing of the oven.
Causes of a bad handle mounting screw can include wear and tear from frequent use, over-tightening, or accidental impact that damages the threads or head of the screw.
Symptoms of a bad handle mounting screw include:
- The oven handle feeling loose or wobbly
- Difficulty in opening or closing the oven door
- The handle detaching from the door
- Visible damage or wear to the screw
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven door handle falling off (model #79096114408) Anne M. • Hummelstown , PA • August 22, 2015
I purchased two screws (316433300) and the handle (316443602). Screws and handle are exact replacements of old parts that wore out. I was hoping the screw would be longer, but so far it works perfectly. I will keep you posted if it wears out again in the near future. Thanks ApplicancePartsPros.com — this was an easy fix!
Read more
More
$19.95
- Compare At:
-
$23.54
- You Save:
-
$3.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 316239700
The Oven Door Seal is an OEM part for Frigidaire wall ovens and ranges. Located around the outer perimeter of the oven door, this silicone seal forms a tight insulation barrier when closed. Maintaining appropriate interior temperatures relies on an intact door seal.
Causes of a bad oven door seal can include cracking, crumbling or compression from repeated use over many years. Food debris or residue left on the seal surface may also degrade sealing ability.
Symptoms of a bad oven door seal include:
- Difficulty closing or sealing the oven door tightly
- Visible gaps around the door allowing heat escape
- Higher energy bills from the oven running excessively
- Uneven or unreliable cooking temperatures
This OEM Frigidaire oven door seal is also compatible with some Electrolux, Gibson, Kelvinator and Kenmore wall oven models.
Do-It-Yourself Stories from Customers like You
I needed to replace the rubber seal on my oven door Cheryl R. • St Martinville , LA • October 18, 2014
First i called sears parts direct to order this part, because that is where i purchased my electric range. they had an outrageous price of $98. unbelievable to think that such a small piece of rubber could cost that much. i also called a few other parts dealers on other websites. they also had high prices. when i called appliance parts pros they cut the cost by 50%. i am not sure if i could have found a better price because i stopped there. it is exhausting and time consuming to have to compare...
Read more
More
$98.95
- Compare At:
-
$117.75
- You Save:
-
$18.80