Kenmore Range 790.96424401 (79096424401, 790 96424401) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508926
Burner won't turn off or element light stays on? This range burner control switch regulates temperature and power. Moderate DIY repair, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
The control knob was orginal equipment but the switch installed by a sears tech was not and the knob eventually would not work the switch Kevin W. • Yucca Valley , CA • December 19, 2016
I went on your website found the parts needed to make the repairs. I watched the short video on installation. The parts arrived just a few days after I placed the order. I finished the repair in less than an hour and had to wait a few minutes to test the switch since the power was off and on due to a wind storm. Simple easy to do repair and I saved $90.00 on service fee for a tech to do the repair.
Read more
More
$64.70
- Compare At:
-
$76.35
- You Save:
-
$11.65
Genuine Frigidaire part
By: Frigidaire
Part Number: 316008401
Size: 3/4 inch od x 1/4 inch id.
Do-It-Yourself Stories from Customers like You
Replaced screws on oven handle and door Jason D. • Bowling Green , KY • February 14, 2016
Secured the inner and outer door together and screwed handle back in place.
Read more
More
$8.56
- Compare At:
-
$10.19
- You Save:
-
$1.63
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935238
If your range has no power or burnt plastic smell, the terminal block may be melted. This kit restores secure power connections. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Terminal block had melted due to loose connections Brandon P. • Durant , OK • June 29, 2014
Replaced the terminal block.
Read more
More
$74.74
- Compare At:
-
$89.69
- You Save:
-
$14.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303288565
This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.
- Fastens the switch body to a bracket or chassis panel
- Helps keep the switch aligned for consistent actuation
- Replaces stripped, corroded, or missing mounting hardware
- Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area
What's included: 1 truss-head machine screw (#8-32 x 3/16) Install notes:
- Disconnect power to the appliance before servicing
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Verify thread size and length match the original hardware
- If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
$7.48
- Compare At:
-
$12.93
- You Save:
-
$5.45
Genuine Frigidaire part
By: Frigidaire
Part Number: 139091300
Graphic label overlay for your electric range control panel. Replaces worn, peeling, or cracked original to restore clear button legends and a clean finish.
Do-It-Yourself Stories from Customers like You
Cracked control panel overlay. Bob W. • Feasterville , PA • January 25, 2024
Replaced the overlay with the new part.
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304445529
Replaces worn or broken range oven door hinges that cause sagging, misalignment, or improper door closure. Restores smooth opening and proper support.
Do-It-Yourself Stories from Customers like You
Oven door wouldn't close all the way Richard M. • Durham , NC • March 08, 2015
I replaced the hinges and hinge mounts. Upon inspection of the mounts, it seems that they had become slightly deformed on the lower portion, where the heel of the hinge applies pressure to the frame. Probably didn't need new springs, just the mounts, but I just kept em in anyway. Easy fix, anybody can do it, good instructions in the kit. Very pleased with appliancepartspro speed of delivery.
Read more
More
$135.22
- Compare At:
-
$159.56
- You Save:
-
$24.34
Genuine Frigidaire part
By: Frigidaire
Part Number: 316021109
Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.
Do-It-Yourself Stories from Customers like You
Everything went great! Tiffanie H. • Ortonville , MI • January 12, 2016
Husband installed the glass and trim it looks great!
Read more
More
$10.70
- Compare At:
-
$12.73
- You Save:
-
$2.03
Genuine Frigidaire part
By: Frigidaire
Part Number: 316429301
Oven won't heat, wrong element activates, or temperature swings wildly? This control board regulates heating circuits and display. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Front left burner was not working on my glass top range Danelle P. • Stratham , NH • March 07, 2015
1. I ordered a new burner. It didn't fix it.
2. I ordered a new burner switch. It didn't fix it. But still needed to be replaced because I cold see itt had burned out.
3. I checked the wires to the burner, then to the switch, they were all fine. I probably should have done this first. My last possible solution was the simmer switch board. I couldn't visually see any points of failure but it really was my last resort before calling a repair man or buying a new stove. 4. I ordered new...
Read more
More
$154.51
- Compare At:
-
$183.87
- You Save:
-
$29.36
Genuine Frigidaire part
By: Frigidaire
Part Number: 316445500
Oven light stays on or won't turn on when door opens? This door-activated switch restores automatic light control. Easy 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Oven door wouldn't lock & oven light stayed on Michael B. • Dubois , PA • November 26, 2015
Replaced light switch
Read more
More
$52.68
- Compare At:
-
$63.22
- You Save:
-
$10.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 316272900
This factory screw secures panels, brackets, and other components in your cooking appliance. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and keep parts properly aligned during use.
- Fastens components to maintain proper alignment and stability
- Helps prevent vibration, rattling, and loose parts during operation
- Replace if threads are stripped, the head is damaged, or the screw is missing
- Commonly used to mount internal or exterior parts in ranges and wall ovens
Includes: 1 screw Installation notes:
- Disconnect power and allow the appliance to cool; shut off gas supply if applicable
- Use the correct driver bit to avoid stripping the screw head
- Install in the original location and do not overtighten
- If the receiving threads are damaged, repair or replace the mating part before installation
Do-It-Yourself Stories from Customers like You
We ordered a new leg, we thought we needed one. Anna H. • Centralia , WA • October 11, 2018
When we went to put it on, there was one there. We just needed pliers to loosen it.
Read more
More
$19.50
- Compare At:
-
$23.20
- You Save:
-
$3.70
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303285179
Size: 8-32t x 0.500 inch. Color: Black.
Do-It-Yourself Stories from Customers like You
Needed to replace bottom panel in Fridgedaire electric oven Sharon T. • Monroe Township , NJ • July 31, 2018
Went on site, read the reviews to see how difficult it would be or if any problems. Then ordered it And received it the next day!!!
The 2 screws were a bit hard to remove. Found the right screwdriver by using the 2 new screws I ordered.
Once I got them out, lifted the old panel out. Pushed down on one corner so could get a grip on opposite corner to lift out.
Once out, put in new one. Put in new screws and good to go!
Will certainly NOT line with foil ever again!!!
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Frigidaire part
By: Frigidaire
Part Number: 316405800
Fix an oven door that won't lock during self-clean or clean cycle errors. This door latch assembly secures the door and reports lock status to the control.
More
$44.62
- Compare At:
-
$53.10
- You Save:
-
$8.48
Genuine Frigidaire part
By: Frigidaire
Part Number: 316087500
Secures the glass light cover to your range oven cavity. Replace if the retainer is cracked, broken, or missing to keep the lens firmly in place.
Do-It-Yourself Stories from Customers like You
Missing lens on oven light Gary S. • Richland , WA • February 22, 2015
I installed a lens I ordered from you.
Read more
More
$58.43
- Compare At:
-
$69.53
- You Save:
-
$11.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 316418900
Replacement screw secures panels, trim, and internal components in your appliance. Needed when original fastener is missing, stripped, or damaged.
More
$10.70
- Compare At:
-
$12.73
- You Save:
-
$2.03
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303321321
Touch-up paint for appliances to cover scratches, chips, and worn areas on exterior surfaces. Restores appearance of refrigerators, ranges, and more.
Do-It-Yourself Stories from Customers like You
Handle broke on refrigerator Angela C. • Colfax , WI • July 18, 2015
Easy fix. Removed two screws and slip the old one off and replaced it with the new one.
Read more
More
$31.59
- Compare At:
-
$37.28
- You Save:
-
$5.69
Genuine Frigidaire part
By: Frigidaire
Part Number: 316464301
A replacement motor latch that secures the motor assembly to the appliance chassis, helping keep the motor stable during operation for smoother performance and reduced vibration. Fits specific Frigidaire/WCI motor assemblies. What it does:
- Secures and positions the motor assembly to prevent excessive movement
- Helps reduce vibration and rattling caused by a loose motor mount
- Restores proper alignment between motor and drive components
- Can eliminate intermittent contact-related noise from a shifting motor
What's included: One motor latch Install notes:
- Disconnect power (unplug or switch off breaker) before starting any repair
- Installation typically requires accessing the motor area—expect to remove panels or the cabinet
- Keep track of mounting hardware; replace any damaged fasteners
- Test operation after reassembly; stop and recheck if noises or vibration persist
Do-It-Yourself Stories from Customers like You
A part got damaged to where the clock and oven stopped working Auther C. • Saint Louis , MO • March 14, 2016
I replaced the part with the new one you sent to me.
Read more
More
$116.95
- Compare At:
-
$139.17
- You Save:
-
$22.22