Kenmore Refrigerator 795.58814900 (79558814900, 795 58814900) Parts

A replacement tempered glass shelf that provides a sturdy, easy-to-clean surface for organizing food and containers in your refrigerator. Restores usable shelf space and helps keep items level. What it does:

• Replaces a cracked, chipped or missing refrigerator shelf
• Provides a stable surface for storing food, bowls and containers
• Resists spills and is simple to wipe clean
• Helps maintain proper organization and airflow on the shelf level

• Remove all food and items from the shelf area before installing
• Slide shelf into the support rails until it seats evenly on both sides
• Handle with care — tempered glass can break if dropped or struck
• If shelf supports or rails are damaged, replace or secure them before use

This harness joint is a wiring connector that links two sections of an appliance wiring harness, restoring electrical continuity and reliable signal/power transfer. Use it to replace a damaged, loose, or corroded harness connection. What it does:

• Joins wiring harnesses so power and control signals pass between components
• Restores intermittent or lost electrical connections caused by broken or corroded terminals
• Helps eliminate symptoms like no power to a module, intermittent operation, or communication failures
• Maintains proper routing and strain relief where harness sections meet

• Disconnect power (unplug or shut off breaker) before inspecting or replacing wiring
• Match connector shape and terminal arrangement before installation; secure firmly until it clicks or seats
• Avoid forcing pins; inspect adjacent wires and insulation for damage and replace if needed

This replacement fan assembly restores airflow in your appliance's cooling system to help maintain proper temperature and circulation. It's a direct-fit replacement designed to stop airflow-related issues and reduce noise from a failing fan. What it does:

• Circulates air across evaporator/condenser coils to support proper cooling and defrost cycles
• Replaces a worn or failed fan that can cause warm compartments or poor cooling
• Helps eliminate unusual humming, grinding, or rattling caused by a damaged fan blade or motor
• Supports even temperature distribution and can reduce frost buildup when fan operation is restored

• Disconnect power before starting; work on powered appliances can cause shock or injury
• Handle the fan blade carefully to avoid bending blades or damaging the motor
• Secure mounting fasteners to prevent vibration

This fan assembly moves air through the appliance to help maintain proper cooling and airflow. It replaces a worn or noisy fan to restore efficient air circulation and temperature consistency. What it does:

• Circulates air across evaporator or condenser coils to support proper cooling
• Helps reduce temperature fluctuations and frost buildup when functioning correctly
• Stops or slows excessive noise caused by a damaged or unbalanced fan
• Restores airflow when a failed fan motor or blade prevents circulation

• One fan assembly (motor and blade housing)

• Disconnect power before starting any repair to avoid shock or injury
• Handle the fan blades and motor carefully to avoid bending blades or damaging wiring

This guide is the replacement drawer slide guide that supports and aligns a refrigerator drawer for smooth, stable opening and closing. Restore proper drawer travel and help prevent binding, sagging, or uneven movement. What it does:

• Supports the drawer on its track and keeps it aligned.
• Guides the drawer during opening and closing for smooth travel.
• Prevents the drawer from binding, sagging, or coming off the track.
• Reduces noise and wobble caused by worn or broken guides.

• Always unplug the appliance or turn off power at the breaker before starting repairs.
• Remove the drawer to access the guide.
• Inspect the mating track and adjacent guides; replace any damaged parts to ensure proper fit.
• Tighten fasteners securely but avoid over-tightening to prevent damage.

This lamp cover protects and diffuses the appliance interior light for safer, even illumination. It restores proper light distribution while shielding the bulb from spills, bumps, and debris. What it does:

• Covers and protects the interior lamp assembly to prevent direct contact with the bulb
• Diffuses light for more even illumination inside the compartment
• Helps prevent dirt, moisture, and food particles from reaching the lamp
• Commonly replaced when cracked, discolored, or missing, which can cause glare or uneven lighting

• One lamp cover only

• Disconnect power to the appliance before servicing to avoid shock
• Handle the cover carefully to avoid cracking; use gloves to keep it clean
• Reinstall using the existing clips or screws; ensure correct orientation and secure fit
• If lamp or mounting hardware is damaged, replace those components as well

This vegetable tray assembly provides a durable storage surface for fresh produce in the refrigerator crisper area, helping keep fruits and vegetables organized and easier to access. It restores proper storage function when the original tray is damaged. What it does:

• Supports and organizes fruits and vegetables inside the crisper compartment
• Replaces cracked, warped or missing trays that hinder storage and cleaning
• Helps maintain airflow and containment in the crisper area for consistent use
• Fits into the refrigerator's crisper framework as the shelved tray surface

• Install by sliding the tray into the crisper rails until it seats; handle gently to avoid cracking
• Clean with mild soap and warm water before first use; do not use abrasive cleaners or sharp scrapers
• Disconnect power or avoid working near moving components if removal requires accessing other fridge parts

This drip tray is the replacement pan that collects defrost and condensate water beneath the refrigerator, helping keep floor and cabinet areas dry. It restores the appliance's normal water drainage path. What it does:

• Catches defrost and condensate water from the freezer/refrigerator evaporator
• Directs collected water to the evaporator/heat source or drain area to allow evaporation
• Helps stop water pooling under or around the appliance that can cause floor damage
• Fits into the cabinet under the unit and works with existing drain and mounting features

• One drip tray

• Disconnect power to the appliance before attempting any service
• Pull the appliance away from the wall and remove the kick plate or front access panel as needed to access the tray
• Replace the tray in the cabinet, ensuring it seats and aligns with existing clips, slots, or drain tube
• If you see additional damage (cracked supports, clogged drain tube), inspect and replace those parts separately

This fan guide directs airflow from the evaporator fan to improve cold-air circulation in the fresh food/freezer compartment. It restores proper air routing for more even cooling and reduces direct fan contact with other components. What it does:

• Channels cold air from the evaporator fan into the cabinet for consistent temperature distribution
• Keeps the fan blade aligned and prevents rubbing or contact with other parts
• Helps reduce noise caused by misdirected airflow or loose fan components
• Commonly replaced when cracked, broken, or warped from impact or age

• Disconnect power before servicing the appliance to avoid electrical shock
• Replacement typically requires removing the evaporator cover or inner liner to access the fan area
• Inspect surrounding mounts and fasteners; replace any damaged clips to ensure secure fit
• Handle plastic guide carefully to avoid cracking during installation

This refrigerator door gasket creates a tight seal around the door to help keep cold air in and warm air out, preserving food freshness and improving cooling efficiency. Fits as a direct replacement for a damaged or worn seal. What it does:

• Seals the door edge to maintain proper internal temperature and reduce energy loss
• Helps prevent frost build-up and moisture accumulation inside the compartment
• Reduces compressor run time by improving cabinet insulation
• Restores proper closing and latching when the original gasket is torn, warped, or compressed

• One door gasket

• Disconnect power before starting any repairs and remove food from the affected compartment
• Peel out the old gasket and clean the door frame; align new gasket with the door channel and press into place
• Some installations may require warming the gasket slightly or loosening hinge/retaining screws for proper fit; tighten screws and check seal
• Inspect the seal all the way around the door and adjust as needed; avoid using sharp tools that could damage the new gasket