Kenmore Washer 970.-C40032-00 (970-C40032-00, 970 -C40032-00) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 131906700
$140.34
- Compare At:
-
$168.41
- You Save:
-
$28.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131906800
$8.90
- Compare At:
-
$9.17
- You Save:
-
$0.27
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131906900
$7.04
- Compare At:
-
$7.26
- You Save:
-
$0.22
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131907500
Wire harness that connects the dispenser assembly in your washer. Replace if wires are frayed, connectors are damaged, or the harness is broken or missing.
More
$50.66
- Compare At:
-
$60.29
- You Save:
-
$9.63
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131951300
$7.04
- Compare At:
-
$7.57
- You Save:
-
$0.53
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131979000
$7.88
- Compare At:
-
$8.43
- You Save:
-
$0.55
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134130000
$7.12
- Compare At:
-
$7.33
- You Save:
-
$0.21
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131763310
Washer door strike ensures proper door closure and sealing during wash cycles. Replace if door won't latch or seal. Verify fit with your model number.
This part fixes the following symptoms
-
Door latch failure
-
Door won't close
-
Lid or door won't close
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Door latch broke Paul C. • Sun City West , AZ • May 21, 2025
Ordered it, installed it.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131461200
The Washer Drain Hose is an OEM replacement part for Frigidaire washing machines. It is a flexible, 7 ½ ft plastic hose that connects the washer tub to the household drainage system. The drain hose removes water from the washer at the end of each cycle.
Symptoms of a faulty drain hose include:
- Water failing to fully drain or continuously draining
- Wet flooring around the washer due to leaks
- Excess water left standing in the washer tub after cycles
- Reduced washing performance due to inadequate drainage
Causes of a bad drain hose include kinks or bends that restrict water flow, cracks or holes from wear and tear, and blockages from accumulated debris. These issues can compromise the hose's ability to drain water properly.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaky drain hose Rocco S. • Rochester , NY • February 24, 2017
Simply open the top of the washer by inserting a putty knife (watch YouTube ) and then the front panel by removing two bottom philips head screws on the front. The whole front panel comes right off. Using pliers the spring clams holding each hose, they come off and each hose is replaced. The drain one was only leaking but since it has open I changed both and even the drive belt. Whole job less than 1 hour. BTW parts arrived next day!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134869400
This OEM replacement part is a drive motor for washers. The drive motor is the main engine that propels the washer tub to spin and perform its primary function of washing clothes. Over time, a drive motor can lose power or stop working altogether due to excessive wear and tear. If the washer is no longer spinning or not working as efficiently as it once did, the drive motor will need to be replaced. Thankfully, replacing this part is a relatively easy fix.To begin, start by unplugging the washer. Once unplugged, move the washer away from the wall to gain access to the back panel. Uninstall the back panel by removing the mounting screws. Once removed, gain access to the drive motor and remove the screws that attach it to the washer. After unthreading the screws, pull the drive motor out of its place and position the new motor in its original position. Fasten the mounting screws and make sure the motor is securely attached. This genuine replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore brand washers.
Do-It-Yourself Stories from Customers like You
Front load washer Marcos O. • Pasadena , TX • October 30, 2015
Unplug washer then took back panel off. Unplug wires from motor then removed four screws from the motor housing then took old motor off and replaced it with new motor
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131618500
Fix loud banging, grinding noises, or oil leaks during spin with this inner tub assembly. Includes spider and shaft. Advanced repair, 2-4 hours.
Do-It-Yourself Stories from Customers like You
The spider was completely disintegrated Molly H. • New York , NY • February 10, 2015
The biggest challenge was replacing the inner tub assembly (with spider and shaft) without full access to the top of the washer, only to the back. Due to space limitations, the matching stacking gas dryer could not be removed: it could only be elevated (using wood blocks) about 4 inches above the top of the washer. Removing the washer's hoses, motor, control panel, and rear weight, and releasing the shock absorbers, was fairly easy. But supporting the outer tub assembly, with its front-end...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131278700
Outer door panel that replaces a damaged or worn outer door surface, restoring the appliance's finished exterior and protecting inner door components. Ideal when the exterior is dented, scratched, or cosmetically damaged. What it does
- Provides the finished exterior surface for the appliance door and protects internal door components from damage.
- Restores appearance after dents, scratches, rust spots, or cracked paint.
- Re-establishes mounting surfaces and edge trim where tabs or attachment points are intact.
- Helps prevent further corrosion or moisture intrusion into the door assembly.
What's included One outer door panel. Install notes
- Disconnect power (and water, if applicable) and follow before starting; use proper PPE.
- Door removal and panel replacement often require basic hand tools; save and reuse original screws, handles, and trim unless replacements are supplied.
- Transfer any hardware, insulation, or inner-door pieces from the old door to the new panel as required.
- Large panels can be awkward—have a second person assist to avoid dropping or bending the panel.
Do-It-Yourself Stories from Customers like You
After 15 years the plastic door busted where the screws held the hinges on and leaked Joseph R. • Cerritos , CA • October 10, 2016
Purchased the door panels (both sides) and replaced them both. Not sure if spending $150 on door parts for a 15 year old washer was a great investment, but the parts worked great. Took maybe five minutes to put it all back together.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131749200
Genuine Frigidaire part
By: Frigidaire
Part Number: 131271910
Do-It-Yourself Stories from Customers like You
Dart on the despencer door broken Kathryn C. • Galesburg , IL • December 22, 2016
The lady that talked to Fred gave him great help. She told him how to take the front off to replace the part. It only took a couple of minutes to do the repair. Even though I work for Sears parts dept. he didn't think I knew what I was doing..
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131272000
Genuine Frigidaire part
By: Frigidaire
Part Number: 131883400