Lg Range EXV1711B Parts

Genuine Lg part

Door Latch Hook

By: Lg

Part Number: 4026W2A015A

The Door Latch Hook is an OEM replacement part for LG microwaves. Located internally on the door frame, this metal hook secures firmly into the microwave's door latch bracket when closed. As a common wear point, the hook can experience minor warping over many years of use.

Causes of a bad door latch hook include normal wear and tear, loss of tension, or deformation from frequent door opening and closing cycles long-term.

Symptoms of a bad latch hook include:

Door that does not close fully or completely latch in place
Gaps forming in the door seal when shut
Inability to achieve a tight, solid seal around the perimeter
Latch hook failing to grasp the bracket securely

This OEM LG part is also compatible with Sears/Kenmore microwaves.

Do-It-Yourself Stories from Customers like You Glass fell out of its retainers and plastic clips holding the frame assembly to the door broke off Steve C. • Caledonia , WI • September 23, 2015

Careful placement of new screws into the inside of the outer door that now hold the frame assembly to the door secured the frame assembly to the outer door. All of the other parts I bought and replaced were a waste of money. I figured since I had them I might as well install them anyways. Easier than sending them back since I had the whole thing apart anyways. The part I really needed was no longer available, the outside door. The glass reinstalled into the retainers in the door without a... Read more

Genuine Lg part

Turntable Roller Ring (Rotating Ring Assembly)

5.0 (3)

By: Lg

Part Number: 5889W2A015A

This turntable roller ring sits beneath the glass tray and provides a smooth rolling track so the tray rotates consistently during cooking. Replacing a worn or cracked ring restores steady rotation for even heating and quieter operation.

Supports the glass turntable and allows it to roll around the center drive
Helps maintain smooth, level rotation for uniform cooking results
Wear or damage can cause the tray to stop turning, bind, wobble, or make grinding noises
Visible cracks, flat spots, or missing/damaged rollers indicate the ring should be replaced

What's included: One turntable roller ring assembly.

Disconnect power to the microwave before servicing
Open the door, remove the glass tray, and lift out the old ring; clean the track area
Place the new ring in the track with rollers facing down; reinstall the tray on the coupler
Run a brief test cycle to ensure smooth, stable rotation

This part fixes the following symptoms

Tray won't turn

Do-It-Yourself Stories from Customers like You One of the roller wheels on the turn table ring under the glass tray had broken off. Doug K. • Fullerton , CA • October 02, 2023

Bought a new rotating ring assembly that goes under the glass tray. Read more

Genuine Lg part

Cover,(Lamp Cover)

5.0 (2)

By: Lg

Part Number: 3550W2L001A

Do-It-Yourself Stories from Customers like You Light bulbs burn out and filters stop doing their job Charles E. • Lakeville , MN • November 15, 2014

I found the model number and did a search on Google. I found your website and became a member, quickly typed in my model number and within a few minutes had the parts ordered. Then it was a matter of a few days and the parts arrived as ordered. The repairs were easily done with a screwdriver and now the microwave has new bulbs, filter and bulb covers. Lights are working on lo and high setting and my wife is happy. Read more

Genuine Lg part

Holder, Cook Auxiliary

By: Lg

Part Number: 4930W1A027A

The holder is an OEM part for LG microwaves. It provides support and stability to the microwave's shelf or rack, allowing you to safely place and heat your food. It ensures that the shelf remains securely in place during operation, preventing any accidents or damage.

A bad shelf holder can occur due to wear and tear over time, accidental mishandling, or damage from excessive weight or impact. If the support becomes loose, cracked, or broken, it can compromise the stability of the microwave shelf, making it unsafe to use.

Symptoms of a bad holder include:

Unstable or wobbly microwave shelf.
Inability to properly secure the shelf in place.
Noticeable cracks or damage to the support.
Difficulty in placing or removing items from the shelf.

This OEM LG part can also be used on Kenmore/Sears appliances.

Genuine Lg part

Filter

5.0 (2)

By: Lg

Part Number: 5230W2A004A

Color: metallic. Measures about 15 inches wide by 8 inches deep.

Do-It-Yourself Stories from Customers like You Light bulbs burn out and filters stop doing their job Charles E. • Lakeville , MN • November 15, 2014

Genuine Lg part

Glass Tray

5.0 (11)

By: Lg

Part Number: 1B71018G

Do-It-Yourself Stories from Customers like You Broke the glass tray in microwave Cindi S. • St. Johns , FL • June 27, 2014

Ordered part and put new plate in microwave. Read more

Genuine Lg part

Plate,Mounting

By: Lg

Part Number: 3300W0A018A

Genuine Lg part

Base Plate Assembly

By: Lg

Part Number: 3303W1A061A

Genuine Lg part

Board,Latch

5.0 (1)

By: Lg

Part Number: 3500W1A028B

Do-It-Yourself Stories from Customers like You Open the door and the microwave would start up with the door open Frank Z. • St Cloud , FL • May 12, 2017

Take the top vent off by two screws & then one screw on the side & lifted her up and I could see the 3 switches I need to repair. Then unscrewed the housin to the 3 switches. Took the housin out , put the 3 switches in the new housing & put her in & plug them in . And plug the Nucor and she works like new. Highly recommended to deal with these people good people for the do-it-yourselfer. Read more

Genuine Lg part

Seal Tape

By: Lg

Part Number: 3536WRA001T

Genuine Lg part

Cover

By: Lg

Part Number: 3550W1A189A

Genuine Lg part

Cover,Stirrer Fan

By: Lg

Part Number: 3550W1A327A

Genuine Lg part

Cover

By: Lg

Part Number: 3550W3A084A

Genuine Lg part

Thermostat

5.0 (1)

By: Lg

Part Number: 3B72543Q

Do-It-Yourself Stories from Customers like You After a microwave fire there was no power to anything (display lights etc ) Daniel Y. • Pleasant Plain , OH • April 19, 2014

Replaced thermostat. Voltmeter showed no continuity so I knew it was dead. Microwave still stinks like burnt biscuit but it works! Took about a half hour to dismount the microwave and pull the casing off to expose the thermostat. It was extremely easy to do. I had to change the connectors as they were too small for the new part but that added all of 2 minutes to the project. In my case the fire didn't damage any other components. Total job time was less than an hour. Read more