Lg Dishwasher LDS6040ST Parts

Fix dishwasher leaks from the bottom or poor spray action with a new sump and motor assembly. Includes circulation motor, drain pump, and gasket.

The Micro Switch is an OEM part for LG dishwashers. It plays a crucial role in detecting when the door is securely closed prior to starting a cycle. This important safety feature prevents accidental exposure to hot water, detergent, and chemicals. 

Causes of a bad micro switch include degradation from years of repeated use, debris interfering with mechanisms, or damage from attempts to force or slam the dishwasher door closed.

Symptoms of a bad micro switch include:

• Cycles failing to start despite a closed door
• Hot water or steam visible escaping when running 
• The dishwasher not detecting the closed door position
• Error codes displayed related to door position sensors

This OEM LG part is also compatible with Sears/Kenmore. Replacing only when truly faulty helps ensure safe and reliable dishwasher function.
 

Connects household water supply to your dishwasher. Replace if hose is kinked, cracked, dry-rotted, or leaking at connections. Installs at bottom.

Mounts over the dishwasher's drying fan vent opening to shield the blower and direct airflow into the tub. Replace if cracked, damaged, or missing.

This small clip attaches to the dishwasher rack and holds the tine rows in position. It allows you to fold or reposition tines to accommodate different dish sizes and shapes. Replace this clip if tine rows are loose, fall flat during wash cycles, or no longer stay in their adjusted positions.

This is a safety switch assembly that helps ensure the dishwasher operates only under safe conditions, such as when the door is properly latched or water pressure is adequate. It sends a signal to the control board to allow or interrupt the wash cycle. Replace this switch if the dishwasher will not start, stops mid-cycle unexpectedly, or fails to fill with water properly.

Channels wastewater from your dishwasher to the household drain. Replace if cracked, kinked, clogged, or leaking to restore proper drainage during cycles.

This is a damper and sound shield assembly that attaches to the dishwasher tub to reduce noise and vibration during wash and drain cycles. It acts as an insulating barrier that absorbs sound energy from water spraying and motor operation. Replace this part if your dishwasher has become noticeably louder than usual or if the existing sound shield is damaged, warped, or has come loose.

Replace cracked or missing dishwasher protective cover to shield internal components from dust and debris. Restores secure enclosure for wiring and sensors.

This is a slide rail and roller assembly that mounts on the right side of the dishwasher tub to support and guide the cutlery or dishrack as it slides in and out. The rollers allow the rack to move smoothly along the track. Replace this assembly if the rack is difficult to slide, feels wobbly, or the rollers are cracked, worn, or no longer turning freely.

Mounting bracket that secures dishrack components in place inside your dishwasher. Replace if cracked, broken, or missing to restore stability.

Replacement dishwasher holder secures internal components in proper position. Needed when original is cracked, broken, or missing causing rattling.

Replacement rack roller wheel for dishwasher lower or upper rack assemblies. Install when original wheels are cracked, broken, or worn causing rough rolling.

Stopper roller guides and cushions dishwasher panels for smooth, quiet operation. Replace if door binds, rubs, or moves unevenly. Confirm fit with your model.

Replacement rack rail assembly for dishwashers. Guides and supports dish racks for smooth sliding. Needed when rails are cracked, broken, or worn.

Secures and pivots the dishwasher door for smooth opening and proper alignment. Replace if your hinge is broken, cracked, or worn to restore stability.