Lg Dishwasher LDS6040ST Parts

Replace cracked or missing dishwasher protective cover to shield internal components from dust and debris. Restores secure enclosure for wiring and sensors.

Channels wastewater from your dishwasher to the household drain. Replace if cracked, kinked, clogged, or leaking to restore proper drainage during cycles.

This is a damper and sound shield assembly that attaches to the dishwasher tub to reduce noise and vibration during wash and drain cycles. It acts as an insulating barrier that absorbs sound energy from water spraying and motor operation. Replace this part if your dishwasher has become noticeably louder than usual or if the existing sound shield is damaged, warped, or has come loose.

Fixes inconsistent cleaning and improper cycle timing caused by inaccurate water clarity detection. Measures soil level in wash water for optimal performance.

Routes fresh water into the dishwasher during fill cycles. Replace this hose if cracked, kinked, leaking, or damaged to restore proper water flow.

This is a common fastening nut used to secure panels, trim, or components on compatible LG appliances. It provides a simple, reliable way to hold mating parts in place and restore proper fit and function. What it does

• Secures panels, brackets, or hardware to prevent movement or vibration
• Stops rattling or loose parts caused by a missing or worn nut
• Restores proper alignment when replacing damaged or stripped fasteners
• Works where a standard threaded nut is required for reassembly

• One common nut as pictured

• Disconnect power and water before servicing the appliance
• Use the properly sized wrench or socket to avoid rounding the nut
• Do not overtighten; tighten until snug and secure per OEM torque guidance
• Replace like-for-like—thread size and type match the original

Replace cracked or worn dishwasher leveling legs. This foot assembly installs at the base corners to restore proper height adjustment and stability.

This clamp secures hoses or wiring to the appliance chassis to prevent movement, chafing, and vibration-related wear. It helps keep connections stable so hoses and wires stay in place during normal use. What it does:

• Holds water, drain or vent hoses in position to reduce strain and prevent rubbing
• Keeps wiring harnesses routed and fastened to avoid chafing or accidental disconnection
• Reduces vibration-related noise caused by loose hoses or wires
• Helps prevent hose kinks and unintended movement that can lead to leaks or intermittent electrical issues

• One clamp

• Disconnect power to the appliance before servicing; shut off water supply if working with water lines
• Remove panels as needed to access the hose or wiring route, then replace the clamp in the same orientation
• Use appropriate pliers or a screwdriver if required; do not overtighten or deform the hose or wiring
• If the original clamp was secured with a fastener, retain and reuse it only if undamaged; replace any stripped or broken hardware

If your dishwasher won't advance through cycles or gets stuck mid-cycle, this cam switch controls cycle sequencing. Restores proper cycle selection.

Secures the dishwasher door to the cabinet and provides a stable pivot point. Replace if your bracket is cracked, broken, or missing to restore alignment.

This assembly includes the leveling leg adjuster components used to properly level and secure the dishwasher within its cabinet opening. It allows you to raise or lower the appliance so the door aligns correctly and the unit sits stable on uneven floors. Replace this kit if the dishwasher rocks, tilts, or if the existing leveling legs are stripped, broken, or no longer hold their position.

Direct-fit replacement dishwasher case assembly that secures and protects internal components. Replace your cracked, broken, or warped outer housing.

This packing seal provides a replacement sealing surface to help maintain an airtight, watertight closure and reduce leaks or drafts around the appliance opening. It restores the original sealing function for reliable performance. What it does

• Replaces worn or damaged packing to re-establish a secure seal
• Helps prevent water leaks and air infiltration at the door or panel seam
• Reduces moisture buildup and helps maintain proper internal temperatures
• Commonly used when a visible tear, deformation, or hardening is present

• One packing seal

• Inspect mating surfaces and clean thoroughly before installing the new packing
• Align the packing evenly and seat it fully into the channel or groove
• Use gentle, even pressure to avoid stretching or tearing the seal

Lower dish rack assembly for your dishwasher. Replaces a cracked, rusted, warped, or broken lower rack with damaged or missing tines and wheels.

This safety switch assembly replaces a failed door/interlock switch to restore the appliance's ability to detect and respond to door position, helping ensure cycles only run when the door is closed. Fits as a direct replacement for the original switch assembly. What it does:

• Detects door/lid position and prevents operation when the door is open
• Helps stop the motor or heating function if the door is opened mid-cycle
• Commonly replaces units that show no power to controls or won't start with the door closed
• Can address intermittent operation or machines that behave as if the door is open

• Disconnect power before servicing to avoid shock or injury
• Replacement requires access to the door/lid area; basic hand tools needed
• Verify proper wiring orientation and secure connectors before reassembly