Lg Dryer TD-V10015G Parts
Genuine Lg part
By: Lg
Part Number: 4036EL3001A
Replace your dryer drum seal when clothes take longer to dry or you notice lint buildup. Maintains heat efficiency and prevents air leaks. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Lg dryer making loud noises Michael B. • Dublin , OH • January 07, 2017
From reading "troubleshooting" sites on the internet, originally thought I'd be replacing the front & rear drum rollers, so I ordered the rollers, and a new belt before I opened up the dryer, taking it out of use. When I opened it up the front rollers were "shot", and the front bulkhead was "totaled". Waited for parts to arrive (within 2 days), and successfully replaced front & rear rollers, bulkhead, drum seal. The on-line videos really helped me ensure I was keeping in the right order. My...
Read more
More
$43.95
- Compare At:
-
$51.86
- You Save:
-
$7.91
Genuine Lg part
By: Lg
Part Number: AGM30045804
Dryer not heating or overheating? The high limit thermostat shuts off heat at unsafe temperatures. Moderate difficulty repair requiring partial disassembly.
Do-It-Yourself Stories from Customers like You
Lg dryer no heat Jeffrey J. • Emerald Isle , NC • June 06, 2016
Checked and cleaned vent which was in need of cleaning, but not too bad (I do not consider this a primary causal detail, but can be a problem, so clean yours). Replaced Hi-Limit Thermostat (safety thermostat) after confirming the circuit was open with ohm meter. While I was in there, I completely cleaned the heater and ducting and internal workings of the dryer. Confirmed the heater coils were good via 20ohm, 20ohm, 40ohm readings (LG service manual has wrong readings). Two weeks later, same...
Read more
More
$95.95
- Compare At:
-
$114.18
- You Save:
-
$18.23
Genuine Lg part
By: Lg
Part Number: 5318EL3001A
Dryer won't heat or takes too long to dry? A faulty igniter often causes no heat in gas dryers. Moderate DIY repair with front panel removal required.
Do-It-Yourself Stories from Customers like You
No heat in my lg dlg5988w dryer Anthony C. • Barnegat , NJ • March 17, 2015
I first ordered a thermostat and ignitor and replaced and that did not work. I asked Appliance Parts Pros their opinion in the chat and they said it was the coils in the gas valve but you had to replace the entire valve as the coils are not sold individually. So i ordered the part and also replaced the thermistor and drum belt while i had the dryer apart anyway! And this fixed the problem! These guys are the absolute best and most helpful i have ever dealt with. This is the second time i...
Read more
More
$125.63
- Compare At:
-
$148.24
- You Save:
-
$22.61
Genuine Lg part
By: Lg
Part Number: 4560EL3001A
Idler pulley maintains tension on the dryer belt. Replace if worn, cracked, or causing belt slippage. Installs between motor and drum support system.
Do-It-Yourself Stories from Customers like You
Dryer was squeaking on start up and rumbling noise while running. Gene L. • Redmond , WA • December 01, 2020
I have an LG dryer purchased in 2007. Model: DLE9577SM. It was squeaking at start-up and rumbling a little. Not knowing what parts I would actually need, I ordered rollers with/without assemblies, tensioner pulley-only, new belt. After viewing this video a couple of times, I attacked my machine which is located in the comfort of my garage. Lots of room to spread out. Nice. This disassembly went OK however because, I suspect, my machine is 13 years old, the removal of the control panel was...
Read more
More
$30.54
- Compare At:
-
$36.65
- You Save:
-
$6.11
Genuine Lg part
By: Lg
Part Number: EBF61496102
This is a safety switch assembly that detects whether the dryer door is open or closed. It signals the control board to stop the drum and heating element when the door is opened during a cycle. Replace this switch if the dryer will not start, stops mid-cycle unexpectedly, or continues running with the door open.
Do-It-Yourself Stories from Customers like You
Dryer would not come on Leroy L. • San Francisco , CA • December 28, 2014
Bought a new switch assembly, watched the video, and replaced the switch. Thr dryer now runs fine. Replacement part matched esxactly.
Read more
More
$47.21
- Compare At:
-
$56.18
- You Save:
-
$8.97
Genuine Lg part
By: Lg
Part Number: 6501EL3001A
The Igniter Sensor is an OEM part for LG dryers. This sensor plays a critical role in the ignition process, ensuring that the gas ignites properly to produce the heat necessary for drying clothes efficiently. It helps monitor and regulate the ignition temperature.
Over time, the igniter sensor can become faulty due to regular use, exposure to high temperatures, or electrical issues. These factors can lead to a malfunction, resulting in the dryer not heating properly or failing to start.
Symptoms of a bad igniter sensor include:
- Dryer not heating up
- Long drying times
- Dryer not starting
- Unusual smells or noises during operation
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Dryer started gas line good won't heat early model no codes Timothy M. • Roaring Spring , PA • November 25, 2016
Used video and took apart dru, this was extremely helpful. I bypassed the belt and door switch. Tested gas valves (gas disconnected) with multimeter. Found that the igniter worked the first gas valve, but the second gas valve would not open and the igniter would stay on. Found a flow chart online that shows the flame detect turns on causing the gas to turn on and shuts off the igniter. I replaced it and tested again. Igniter turns on, shuts off, then power to the second gas valve turns...
Read more
More
$138.95
- Compare At:
-
$165.35
- You Save:
-
$26.40
Genuine Lg part
By: Lg
Part Number: 5835EL1002A
Fix loud banging, grinding noise, or poor drying performance with a new dryer blower wheel. Restores proper airflow through drum and exhaust vent.
This part fixes the following symptoms
-
Too hot
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer would start then quit after about 5 seconds. No error codes-timer running nasal burnt smell. Larry T. • Morristown , TN • December 10, 2017
I replaced the dryer motor. I followed the repair video on the Appliance Parts Pro site, with a few modifications to the procedure. I loosened the control panel and flipped it forward to improve access to the wiring connectors. I also loosened the front panel and tipped it forward before disconnecting the door switch as there wasn't enough space to disconnect the switch otherwise. Removal of the blower assembly required the use of penetrating lubricant as the assembly was stuck on the motor...
Read more
More
$84.95
- Compare At:
-
$101.09
- You Save:
-
$16.14
Genuine Lg part
By: Lg
Part Number: 6323EL2001B
The Dryer Thermistor is an OEM part for LG dryers, designed to monitor and help regulate the temperature within the dryer by providing feedback to the control board about the temperature inside the drum. This allows the dryer to adjust its heat settings accordingly, preventing overheating and ensuring clothes are dried evenly and safely.
Symptoms of a bad Dryer Thermistor include:
- Clothes not drying properly or taking longer than usual to dry.
- The dryer repeatedly stopping during a cycle.
- Error messages appearing on the dryer's display panel.
- The dryer getting too hot or not heating enough.
Causes of a bad Dryer Thermistor can include a buildup of lint and debris affecting its ability to accurately sense temperature, wear and tear over time, or electrical issues within the dryer's circuitry.
This OEM LG part can also be used on Kenmore/Sears appliances.
More
$53.21
- Compare At:
-
$63.85
- You Save:
-
$10.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Lg part
By: Lg
Part Number: 4027EL2001A
Note: May be able to use Whirlpool latch kit# 279570.
Do-It-Yourself Stories from Customers like You
Broken door latch Eric W. • Calabasas , CA • April 20, 2018
Great service parts came faster than expected and online video was perfect!
Read more
More
Genuine Lg part
By: Lg
Part Number: 4026EL3001A