Samsung Washer WF220ANWXAC Parts

With the video that was made from appliance pro.Help me out one hundred percent to understand what I was dealing with Read more

Fairly simple fix. followed you tube video step by step..needed a set of extra hands (wife came in handy) when installing gasket..after several loads as a test, no leaks. Read more

This is an easy fix. Just remove the back panel, remove the hose clamp to pull out the old hose, put the new hose on, make sure the clamp is well centered onto the connection, and return the back panel. Make sure to insert the drain hose into the three plastic guides that prevent the hose from moving around. The Samsung factory did not do this on my original hose, which is why it failed, because it was rubbing against the tub support and it wore a hole into the hose. I am going to complain... Read more

We are moving soon. In checking, I found that a front loading washing machine tub must be stabilized using shipping bolts. I found the correct items on line at AppliancePartsPros.com. "Chris" of your staff was very helpful. He informed me that my washer required only 3 shipping bolt assemblies, instead of the four I expected to buy. The bolts were delivered two days after my order. Read more

Ordered new dispenser assembly and replaced it. Fixed the problem. Read more

When we first removed the drain filter from the washer, we noticed the O-ring had a slight defect which made removal hard and reinstallation almost a nightmare. Finally we ordered another filter when we ordered a water valve/thermistor for the mother-in-law's washer. Filter installed a lot easier than the original one. Should have ordered one way sooner! Now on to the washer. Read more

• Won't start

First I checked the breaker and outlet and both were good...then I unplugged the machine, took the top off, and removed the control panel. I check the wiring to see if there were any loose plug ins, etc...This is where I figured the panel was bad (or possibly the power cord) so I ordered both. The parts arrived the next day. (incredibly fast shipping) Since I wasn't expecting them til after the weekend I left everything disassembled and went on a mini vacation for a couple of days. Upon... Read more

• Shakes and moves

The front legs were slightly worn and the rubber coverings were missing from the rear feet. This allowed the washer to slide easily on the tile floor. I replaced all four feet. This only required a 12 mm open end wrench. After leveling the washer, things were improved, but I also took the opportunity to replace the four shock absorbers under the drum. The shock absorbers were 5+ years old and one was showing signs of wear / damage. This required removing the front and rear panels with a... Read more

Installed new drain pump DC31-00054A. Worked perfectly. Read more

• Shakes and moves

I looked up my model number on the site, and found my parts needed. J then watched a video from repair clinic on you tube. The video was sr sight forward, and made the repair easy. I have repaired washers and dryers for numerous people following the same process. Doing this has saved hundreds of dollars in labor charges. Read more

I watched the YouTube repair video from Appliance Parts Pros. The video was excellent and provided an accurate, step-by-step process on how to fix the problem. It was challenging since there were a lot of disassemblies required in order to get to the part that was needed to be repaired. The parts were ordered from AppliancePartsPros.com and received the next day. I was back watching the video for the reassembly and in no time the washer was back in position and running like a new machine and I... Read more