Thermador Range MEMW301ES Parts

Fix an oven that won't reach set temperature or shows inaccurate readings. This temperature sensor monitors heat levels for proper cooking performance.

The Control Board is an OEM part for Bosch wall ovens. It serves as the main control center for the oven, managing and regulating all the functions, including temperature settings, cooking modes, timers, and the operation of the heating elements. 

Causes of a bad Control Board can include electrical surges, wear and tear from prolonged use, exposure to heat, and moisture or grease buildup that can damage electronic components.

Symptoms of a bad Control Board include:

• The oven not powering on or failing to respond to control inputs
• Display errors or malfunctioning display screen
• Inaccurate temperature regulation or inability to maintain set temperatures
• The oven not completing cooking cycles or shutting off unexpectedly

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Bulb is an OEM part for Bosch ovens. This component provides illumination inside the oven, allowing you to easily monitor the cooking process without opening the door and losing heat.

Causes of a bad bulb can include filament burnout due to extended use, electrical issues that cause power surges, or physical damage from accidental impacts. 

Symptoms of a bad bulb include:

• The oven light not turning on
• Flickering light inside the oven
• Dim or uneven lighting
• The bulb appearing visibly damaged or burnt out

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replace your worn oven door gasket to restore a tight seal, prevent heat loss, and maintain consistent baking temperatures. Confirm fit with your model number.

Fix a burned out or non-working heating element in your wall oven. This replacement element restores proper temperatures. DIY-friendly, takes about 20 minutes.

Replace a cracked, broken, or worn microwave turntable ring. This roller ring sits beneath the glass tray, using small wheels to support smooth rotation.

Microwave won't power on? A blown fuse is often the culprit. This protective component prevents electrical damage from power surges. DIY repair in 1-2 hours.

This meat probe sensor is a temperature-sensing device that inserts into food while it cooks in the oven, allowing the oven to monitor the internal temperature and automatically stop cooking when the target temperature is reached. It connects to a jack inside the oven cavity via a heat-resistant cable. Replace this probe if your oven no longer reads the food temperature accurately, displays a probe error code, or if the cable or tip is visibly damaged.

Seals the oven door to retain heat and improve efficiency. Replace if you notice heat escaping or uneven cooking. Verify fit with your model number.

Light not coming on when door opens or during cooking? This interior light bulb restores visibility inside your microwave or oven cavity.

This is a cooling fan assembly used in wall ovens and ranges to circulate air and prevent overheating of internal components and surrounding cabinetry. It helps dissipate heat from the oven cavity and electronics during and after cooking cycles. Replace this fan if you notice excessive heat on the outer surfaces of the oven, the fan runs noisily or intermittently, or the oven displays overheating error codes.

Replacement inner door glass panel for wall ovens. Installs between door layers to restore protection when original glass is cracked or shattered.

Uneven baking or slow heating in convection mode? A failed convection fan motor stops hot air circulation. Moderate DIY repair restores even cooking.

This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.

A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging. 

Symptoms of a defective Terminal Box may include:

• Inconsistent power supply to the oven
• Non-functional heating elements
• Sparks or electrical arcing within the terminal box area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is a door interlock switch that detects whether the microwave door is properly closed before allowing the unit to operate. It is a critical safety component that prevents the microwave from running with the door open. Replace this switch if the microwave does not start when the door is shut, stops mid-cycle, or blows a fuse when the door is closed.

This electrical switch restores reliable on/off signaling for a specific function in your appliance. Replacing a worn or burned switch helps ensure consistent activation and dependable operation of the affected feature. What it does

• Opens and closes an electrical circuit when actuated to start/stop a function
• Sends a clear signal to the control or power circuit for the selected operation
• Failure symptoms include the function not engaging, intermittent operation, or no response when actuated
• Visual clues can include darkened, melted, or loose terminals and an inconsistent click/feel

• 1 switch

• Disconnect power to the appliance before servicing; shut off water or gas if applicable
• Note wire positions and transfer connectors one at a time to the correct terminals
• Seat terminals fully and secure the switch without overtightening; avoid bending the actuator
• Test operation before final reassembly to ensure proper engagement