Poulan Lawn Mower Blade

This genuine OEM replacement part is the most useful part of a riding lawn mower, as it's responsible for actually cutting the grass. The blade attaches to the lower deck of a mower and rotates at high speeds to cut an even path as the operator rides across a lawn. Lawn tractor blades slowly become worn down after repeated use, causing the blade to dull. If an operator regularly mows over rough terrain, they may also mow over rocks or sticks that can further dull the blade. A dull blade can sometimes be sharpened; however, if the blade is quite old, it would be better to replace it. If a blade is damaged, it can create vibration throughout the mower and will also not create an uniform mowing pattern. When this happens, the blade should be replaced. This part is sourced from its original manufacturer and is designed to be used on Craftsman and Husqvarna riding lawn mowers or lawn tractors. It ships separate of any additional hardware, but you will need a socket wrench and pair of pliers to make the repair.

This adapter attaches the blade to the motor shaft and can ensure a secure fit for the size of the blade that you need. The adapter will hold the blade in place and allow it to rotate appropriately. Although this piece is made of metal, it can wear down with regular use over time and may need to be replaced. It could also become damaged, which would require a more immediate replacement. Either way, this genuine OEM blade adapter can provide a solution for compatible mowers. This blade adapter is reasonably simple to install, but always disconnect the spark plug before doing any work. The Craftsman blade adapter can be used as a replacement part on compatible lawnmowers models from Craftsman, Husqvarna, Poulan and Poulan Pro, Weed Eater, EHP, Yard Pro, Sears, Rally, and Roper.

The blades for a lawn mower are attached to the blade adapter and the spindle. It ensures that the blades are securely in place and that they will stay in place when mowing. It is not safe or effective to use a mower if there are issues with the adapter. Over time, many things could happen to the blade adapter that would require a replacement. In some cases, the adapter could be stripped, which would mean that the blades would then stop rotating properly. Damage from use and misuse can happen in some cases. Normal wear and tear will occur, as well, which can cause a blade to start vibrating and will cause problems with mowing. This metal replacement blade adapter is a genuine OEM part that will work for lawn mowers from several different brands. Compatible brands include Husqvarna, Jonsered, and Craftsman. Replacing the blade adapter will require a wrench.

This 50-inch blade is made for use with riding lawn mowers by Craftsman and Husqvarna. The blade is the component that is responsible for cutting grass or other foliage when the lawnmower is in use. The blade can become worn over time and will leave grass with frayed edges. If the blade is worn out, it will need to be replaced to create a healthier-looking lawn. Replacing the blade will create a clean cutting edge after regular use of a lawnmower.If the mower blade needs to be replaced, a pair of pliers, a socket set, and a wrench set will be required. Place the lawnmower on a stable surface and pull up the blade deck for better access to the 50-inch blade. Take out the blades and the sheared pins before replacing them with new components. Reassemble the deck and test the lawnmower before use.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as a single part. The 50-inch blade is made to be used in several lawn mowers and lawn tractors manufactured by Husqvarna and Craftsman.

This type of lawnmower blade is characterized by deeper curves on the ends, which create enough suction to circulate and expel the grass clippings into a bagger. It is designed to improve the way clippings are ejected out of the discharge chute. It also has larger wind wings that increase airflow. This helps prevent clogging when mowing wet or tall grass. Without a bagger, these blades put excess load on the engine and don't expel clippings as efficiently as low lift blades.  The wear and tear on a high lift blade are considerable, so there's a risk of using a dull blade without regular replacement. Blade erosion can happen over time due to debris, and the mower may offer noticeably less efficient performance when cutting grass. It is time to replace the blade if it has nicks and dents. For the average homeowner, a good rule of thumb is to replace the mower blades annually.  This part is compatible with specific models from Ariens, Craftsman, Husqvarna, Poulan, and Murray. It is an OEM part sourced directly from the manufacturer and is sold individually.

This mulching blade is a genuine Husqvarna part, sold individually. This mulching blade can be used as a replacement part in a lawn mower. The purpose of the mulching blade in a lawn mower is to mulch grass clippings and eventually disperse them across the lawn to keep the soil healthy.The mulching blade in a lawn mower might need to be replaced at some point within the standard lifespan of the appliance if the mulching blade is dented, cracked, punctured, eroded, or otherwise damaged. If the mulching blade cannot finely chop the grass clippings collected during the operation of the lawn mower, the mulching blade should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This mulching blade is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Murray, and Poulan.

This is a genuine OEM mulching blade sourced directly from the manufacturer; it is used on push mowers and riding lawn mowers. A mulching blade is used in place of a regular cutting blade to cut grass clippings finer so that the grass falls back onto the lawn and decomposes. Mulching is beneficial to lawns in many ways. It keeps the soil cooler and reduces water evaporation, meaning the lawn needs less water to stay green. Grass clippings can contain over 70 percent water. Mulching also provides added nutrients to the soil. Mulching blades are also time savers. There are no grass clippings to rake and dispose of after mowing the lawn.A wrench is needed to remove the cutting blade and install the mulching blade. The mower should be on a flat surface with wheel chocks to prevent rolling. Lift the mower deck with a jack to access the cutting blades. Wear gloves to protect the hands. Remove the cutting blade. Install the mulching blade. Lower the mower and remove the chocks. This 46-inch mulching blade is made of metal and sold as an individual unit. It is compatible with push lawn mowers and riding lawn mowers manufactured by Craftsman, Husqvarna, and Poulan

This mulching blade is a 3-in-1 blade. It can cut, discharge, and bag grass clippings. This versatility is due to its curved surface design, which promotes an increased cutting edge. When this mulching blade is in action, the grass clippings will be transferred to the deck and cut once more. Once it falls back to the ground, the clippings are smaller. Smaller clipperings are suitable for mulching because they decompose faster. A mulching blade is made from sturdy metal, but prolonged use can make its edges dull. A dull mulching blade will result in undesirable fraying and tearing cuts. A mulching blade replacement takes 30 minutes or more. Start by disconnecting the spark plug and turn the machine on its side. Then, remove the old blade. Insert the replacement into the blade spindle and use a ratchet for a secure fit. This original Husqvarna mulching blade replacement is a perfect choice. It is made explicitly for lawnmowers from Husqvarna, Murray, Craftsman, Weed Eater, Ariens, Ryobi, and Poulan. It measures 22 and comes in solid metal construction. It is sold individually.

This genuine Husqvarna replacement part is a blade for use with lawn mowers. It is also known as a rotor blade or bagger blade.The lawn mower blade is used to cut grass, and a bagger blade is designed to help lift clippings after cutting, helping them to more easily be directed into the lawn mower bag. A properly functioning blade is essential for the safe and reliable use of a lawn mower. The blade may become worn out or damaged due to extended use, requiring a replacement. Remember to check the blade periodically to spot any wear or damage. This part is an identical replacement for a blade that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. It is made of high-quality durable metal. This part is compatible with Husqvarna, Craftsman, and other lawn mowers. Please note: original part number 581101102 is now obsolete, and manufacturer has replaced the original part number with this part.

Note: This is ONE blade.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

This blade is a genuine Husqvarna part that fits various Husqvarna models. This blade can be used as a replacement part for lawn edgers, which are used to edge the areas of a lawn that are surrounded by or touching pavement.If the blade has made contact with the sidewalk, driveway, patio, garden, or other surface by which the lawn edger is passing, there is a chance that the blade will need to be replaced. Look for damage on the surfaces with which the lawn edger blades have made contact. Additionally, use the lawn edger and check if it its trimming and edging ability has declined or if there is a strange sensation in the feel and experience of trimming, such as a vibration coming from the equipment. If this is the case, the blade might have to be individually replaced. The appliance should not be used again until this replacement has occurred. Remember to always wear gloves when handling, repairing, and operating outdoor equipment such as lawn edgers.This blade is compatible with the brands Husqvarna, Weed Eater, and Poulan.

This part is the mulching blade. This mulching blade is designed to be used on riding lawnmowers and tractors. Mulching blades circulate the grass longer when clipping so that the clippings are smaller. These smaller grass clippings are perfect for mulching because their smaller size lends them to faster decomposing, which in turn puts the nutrients into the soil faster.A new mulching blade may be needed if the blade has been broken or damaged in any way. Mulching blades can be sharpened when they become dull, but it is recommended that they be replaced about approximately 100-200 hours of mowing time. Replacing mulching blades is an easier alternative to sharpening dull ones.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer and it is sold individually. This mulching blade is compatible with riding lawn mowers and lawn tractors manufactured by either Husqvarna or Poulan.