Poulan Lawn Mower Belt

This is a genuine OEM replacement drive V-belt for a riding lawn mower. The drive V-belt attaches to the drive pulley and transfers rotational motion from the transmission to the mower blade. This causes the blade to then spin and cut grass. By using a belt to transfer motion, the engine does not have to work as hard to spin multiple parts, meaning that it runs more efficiently. Drive V-belts are made of a rubber composite material that will begin to fray and stretch over time. Due to continuous motion, these belts absorb a lot of wear and tear, and if left for too long, they can eventually snap and leave the mower blade non-functional. Therefore, it is wise to check the condition of a V-belt during regular maintenance. As soon as it appears to be wearing away, replace it with a new part using a nut driver and screwdriver. When detaching the lower deck, be sure not to lose the bolt clips, as they are required for reassembly. As a high-quality replacement part, this drive V-belt is directly sourced from its original manufacturer. It is compatible with riding lawn mowers made by Husqvarna, Poulan, Craftsman, and Jonsered. This part ships individually.

A V-belt is responsible for transmitting energy. It is made from a thick and sturdy rubber material. It features grooves for improved traction and measures ½ x 95-1/2. A worn-down v-belt can lead to inefficient energy loss, and therefore poor performance. Installing this v-belt requires pliers and a wrench. First, the spark plug wire needs to be removed. Then, position the mower deck to the lowest possible level. Move the machine's blade engagement level to OFF. Remove the belt found from the engine pulley. Don't forget to take out the bow-tie pins and blade engagement cable as well. Remove the bolt from the pulley cover and loosen the nuts found at the idler pulley. Put the new belt and then tighten the nuts on the idler pulleys. The deck can now be re-assembled to its original position. This Husqvarna 532144959 V-Belt OEM Replacement can help keep a lawnmower in top condition. This genuine Husqvarna made V-belt is specifically for driving the blades on a lawnmower. It is compatible with Ariens, Craftsman, Poulan Pro, Dixon, and Husqvarna mowers. This V-belt is sold individually.

The v-belt is a replacement part used on mowers and lawn tractors. The v-belt works with the pulley assemblies in the machine to transfer power from the engine to the mower blades so that it can properly cut the grass. The v-belt is made from flexible rubber, and over time, the belt can be prone to wear and tear. Owners should check their belts occasionally to ensure they are not wearing out. This could cause the belt to become cracked and brittle, which would require a replacement. If the belt is not working properly, or if it is broken, it will not be possible to transfer power from the engine to the blades. This is a genuine OEM part that is sold individually. This pulley will work for a range of lawn mowers and lawn tractors. The v-belt is compatible with many brands including Craftsman, Husqvarna, Ariens, Dixon, and Poulan. It is important for buyers to make sure they are getting the proper v-belt, including the size, when they are buying their replacement part.

Ground drive V-belts are most commonly used on riding lawn mowers and garden tractors. This component connects the transaxle pulley to the engine crankshaft in order to drive the rear wheels. It's possible for this V-belt to break, become worn, or get stretched out to the point where the lawn mower will no longer run. A visual inspection will give an indication of whether the V-belt has issues and needs to be replaced. The first thing that needs to be done is disconnecting the spark plug when replacing the V-belt. Wear work gloves through the process of removing the mower deck and taking off the ground drive belt. Once the original V-belt is gone, the new one can be installed over the transaxle pulley and the mower deck can be placed back on. After reconnecting the spark plug and adding fuel to the V-belt, the lawn mower will be ready for use. This is a genuine OEM replacement component that comes straight from the manufacturer. It is made for use with Husqvarna, Ryobi, Poulan, Weed Eater, Jonsered, and Craftsman lawn mowers. This V-belt is sold individually and will need a screwdriver and wrench for its installation.

This replacement part is a V-belt. It is a genuine replacement part made by Husqvarna. This specific belt is typically found near the engine of many types of lawnmowers. V-belts work together with the transmission of the machine.A new V-belt might be needed if the user hears unusual noises coming from inside the machine. This can mean that the belt is stretched out or torn from years of normal use. It is also possible that the belt is damaged in other ways and is unable to perform the movements needed. As this part is close to the engine, be sure the appliance is completely turned off before starting this repair. This belt is a genuine OEM replacement part. Note that it is sourced directly from the manufacturer and is also sold individually.

This is a genuine replacement drive belt that is manufactured for use in select riding lawn mowers that feature double idler pulleys. This belt is specifically used on models that feature a 38- or 42-inch deck. Its job is to use the pulleys to engage and drive the cutting blades on the mower deck. Belts are subject to repetitive motion and high heat, which can cause them to crack or corrode, or even snap entirely. Replacing belts is typically considered a part of lawn mower maintenance, but some owners choose to keep an extra belt on hand in case of emergencies. Belts can also become stretched with excessive use, causing them to slip and lead to poor cutting performance. This is a genuine OEM drive belt from Husqvarna. It is compatible with select mowers from Poulan, Craftsman, and Husqvarna and fits more than 150 different models. It is made of durable rubber and will require a screwdriver or pry bar to install. Always be sure to disengage the engine and allow it to cool before performing any repairs. It is a good idea to secure the mower wheels when working under the deck, as well. This belt is sold as an individual unit and does not include any additional components.

This genuine Husqvarna replacement part is a zinc coated drive belt for use with rear wheel drive lawn mowers. It is also called a mower belt, ground drive belt, or V belt.A properly functioning drive belt is essential for the safe and reliable use of a lawn mower. The drive belt works to drive the transmission, which in turn allows the mower wheels to turn. The drive belt may become worn out or damaged due to extended use, requiring a replacement. Remember to check the drive belt periodically to spot any wear or damage. This part is an identical replacement for a drive belt that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. Please note: original part number 532406557 is now obsolete, and manufacturer has replaced the original part number with this part.

This replacement v-belt is designed for use in select high-wheeled trimmers. The belt is responsible for driving the cutter head, and is sometimes called the drive belt or trimmer drive belt. It attaches to the axle and the cutter and as the belt rotates, it turns the cutter head so that it can do the trimming. Over time, this belt can become worn, stretched, or twisted. This will require a replacement in order to ensure peak performance of the trimmer. With this OEM trimmer v-belt replacement, it will be easy to get back to work. This genuine OEM v-belt is designed for use in trimmers from Husqvarna, Poulan, Craftsman, Roper, and Weed Eater. It is made of durable composite rubber material and includes a one-year warranty from the manufacturer against defects. Replacing the belt requires a screwdriver and pliers. Always allow the engine to cool completely and wear gloves for hand protection. Beware of pinching or crushing injuries when replacing belts and other tensioned parts. This belt is sold individually and does not include any hardware or additional components.

This is a replacement V-belt that is supplied directly from the manufacturer. The V-belt connects the drive pulley to the transmission pulley. This allows the mower to move forward efficiently. The V-belt is made from rubber. Belts of any type will need to be replaced due to wear from regular use. All belts should be inspected prior to each mowing season for any tears or holes. Shine and flatness are also telltale signs of a belt in need of replacement. The mower may also not propel as well as it used to. The process of replacing the belt will differ slightly between each model. It can be accessed under the mower deck when it has been completely lowered on riding mowers. On older self-propelled mowers, the mower deck may need to be removed to access the location of the belt. New models may offer access to the belt when the cutting deck is lowered.The belt is a genuine OEM replacement part and is designed to be used with machines from the brands: Husqvarna, AYP, Craftsman, Jonsered, McCulloch, Poulan, RedMax, and Weed Eater.

The snowblower belt is used to spin the auger, which is what causes the snow to be thrown when using the blower. The belt will start to wear down and become brittle over time. It can break, which means the machine will no longer be capable of throwing snow since it will not spin the auger. Additionally, owners might notice that there are squeals and other strange sounds that occur when using the blower, even though it might still be working. The belt could slip, particularly after it has become stretched after a lot of use. Owners should inspect the belts regularly. When these problems occur, the owner will want to replace the belt right away. This genuine OEM snowblower v-belt is sold individually and is for use specifically with snowblowers. Compatible brands include Jonsered, Husqvarna, Poulan, Poulan Pro, and Craftsman. The owners should always check their manuals to be sure they are choosing the correct belts to replace for their snowblowers.

This v-belt is a genuine Husqvarna part, sold individually. This v-belt can be used as a replacement part for outdoor appliances with small engines such as lawnmowers and lawn tractors. This v-belt facilitates rotation so that the small engine can be powered on. The v-belt might have to be replaced at some point within the standard lifespan of the appliance if it can no longer serve its function. This could be as a result of general wear and tear or due to a direct impact with a hard object that could permanently warp the component beyond functionality. If this occurs and the damage is visible in the form of rips, punctures, or erosion, the v-belt should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This genuine Husqvarna replacement traction drive attaches the engine of the snowblower to the wheels of the snowblower, allowing the engine to move the wheels and keep the snowblower in motion.Though traction drive belts are known for their durability and resistance to damage, they might have to be occasionally replaced due to inclement weather, hard impact, and deterioration from overuse and exposure. Signs of a deteriorating traction drive belt can include reduced fuel economy, breakdown of power steering, an overheating engine, or visible cracks, piercings, or erosion . If any of these symptoms appear, the traction drive belt should be checked and replaced immediately if needed, as the snowblower cannot function without it in place. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This traction drive belt is compatible with the following brands: Husqvarna and Poulan. Part sold individually.