Power Kraft Tractor

This replacement part is a hex screw. This part is small but important in many different kinds of equipment. Hex screws are able to work with other small parts such as washers or nuts to ensure that components are secure within the equipment.Overtightened screws might be stripped and could fall out or get stuck in place, necessitating replacement. Over time, exposure to the elements may lead to a screw becoming worn or corroded, which may cause it to break or get stuck.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement part is a hex nut. It is a small but important part of many different types of equipment. Hex nuts are able to work with other small parts such as washers or screws to ensure that pieces in the machine are held together properly and are secure during use.A new hex nut might be needed if the current one is unable to stay in place. If it has become stripped, it is possible that it can no longer perform the actions needed. It is not uncommon that nuts become worn down or lodged into place after years of normal use. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This listing is for an MTD left-hand lawnmower axle. The axle is a vital component in regard to the steering and movement of a lawnmower. The left-hand axle is also known as the left handle spindle or wheel spindle. These components attach to the wheel of the lawnmower, allowing the drive system to turn the wheel. A damaged axle can seriously affect the lawnmower's ability to move freely. When an axle becomes damaged, the wheels could have issues moving efficiently. If the problem persists, it's possible that the wheel could become permanently disconnected. Begin the installation by turning the mower on its back. Use a flat head screwdriver to pry the axle free from the retaining tabs. Unthread the mounting bolts securing the front axle cover. Unthread the bolts securing the wheel adjustment plate. Repeat these steps in reverse to install the new component.The axle is a genuine OEM replacement part sourced directly from MTD. This component is only available individually and is not included with any other components. This part is compatible with MTD, Troy Bilt, and Cub Cadet lawnmowers.

This amp fuse is a genuine MTD part, sold individually. This amp fuse can be used as a replacement part in a lawn mower. The purpose of the amp fuse in a lawn mower is to protect the lawn mower from potential voltage issues and failures that might occur during the general use of the appliance.The amp fuse in a lawn mower might need to be replaced if the component suffers damage or blows out after protecting the appliance from an electrical current voltage overload. If the amp fuse has blown or has suffered damage from general wear and tear with long-term use, the amp fuse should be removed and replaced by this genuine OEM replacement part in order to guarantee continued safe use of the lawn mower by the operator. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This amp fuse is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Troy-Bilt.

This replacement part is an insulator plate. It is a genuine replacement part made by MTD. This small part is important to the overall operation of many different machines. It helps to insulate other parts inside the machine as well as allow them space to operate. A new insulator plate might be needed if the current one is missing or damaged in any way including being dented, cracked, chipped, or bent. This can be due to normal wear and tear as it is common that parts become broken overtime. Be sure to refer to the correct owner's manual before attempting to replace this part. This part is a genuine OEM replacement part. This insulator plate is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This replacement part is a washer. This is a genuine replacement part made by MTD. This part is small but important in many different types of machinery and appliances. Washers work together with other small parts like screws to help keep pieces attached securely and safely. A new washer might be needed if the current one is missing or damaged. It is possible that over time washers can become worn down due to friction coming from the parts around them. If this is the case, it is recommended that it be replaced. Be sure to purchase the correct amount of washers as many appliances require more than one to operate effectively. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This part is a replacement washer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, lost, or defective flat washer in a variety of outdoor power equipment. Washers are a standard piece of hardware with a wide variety of uses. They can be used with various equipment components to ensure they are secured properly together by providing a greater surface bearing area for screws and bolts. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this washer, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this washer is suitable for use on several different models of line outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This is a thrust bearing. The thrust bearing is positioned between the lawn mower's spindle and front axle and serves to reduce friction during use. This part makes shifting between different speeds much easier. A worn-out thrust bearing will have more room between the rollers on the outside of the bearing. This movement will cause the bearing to move more than usual. When the bearing goes bad, the driver may notice rattling, squeaking, or other noises coming from the machine. These noises can be more prevalent when the clutch pedal is engaged. To replace the thrust bearing, first, the clutch must be removed from the lawn mower. On the bottom of the driveshaft, there is a bolt and washer that need to be removed. Wedge and move the clutch, allowing it to work its way down the driveshaft, then remove it. There is a bearing retainer clip and three bolts that will enable the thrust bearing to be removed. Repeat the steps in reverse after installing the new component.This product is a genuine OEM MTD part sourced directly from the manufacturer. The part is sold individually and not available with any other components. This product is compatible with MTD and Cub Cadet products.