Pruner Carburetor

Trimmers are found in many shapes and sizes, but they all do the same tough job. That is why so many use gas-powered engines that rely on a carburetor to send a proper blend of air and fuel into the cylinder. If an engine starts and dies, or fails to start even with a fresh tank of fuel, it is likely that a carburetor replacement is needed. This replacement carburetor assembly provides a full carburetor replacement on a more than 40 different hand-held trimmer models made by Craftsman or Husqvarna. This is an OEM replacement part that uses durable metal for the body and ships individually. It requires an Allen wrench, pliers and a screwdriver to do the installation.

This authentic OEM replacement carburetor assembly is a part for a gas-powered trimmer. The carburetor is an essential part of a small or medium sized gas-powered engine and is usually one of the first steps in an engine's mechanics. The carburetor receives fuel from the fuel line and mixes it with air to create a balanced mixture that is ready for combustion. This mixture has to be just right or the engine will not run properly. After a full season of use, a carburetor will usually need cleaning because they slowly build up gunk. If left uncleaned, it will degrade and may no longer allow enough fuel to pass into the engine. Should this happen, the engine will not produce enough power or may not start at all. Look for signs such as backfiring, hard starts, vibrations, or an engine that dies shortly after startup. Use a wrench set to access the carburetor, which is located behind the air filter housing. This replacement carburetor assembly is a quality part for Craftsman and Husqvarna trimmers. It comes sourced from the original manufacturer and includes a carburetor and fuel bulb.

The choke shutter is a trimmer part that restricts the amount of air that flows into the engine. The choke shutter rests inside the carburetor, and is designed to help with the mixture of air and fuel that causes the combustion that starts the engine.If the choke shutter is not opening or closing properly, then the engine will not be able to start. The carburetor's temperature allows the engine to run, and in order to control the temperature, you will need a working choke valve. To install a new choke shutter, start by opening the carburetor inside of the trimmer's engine. This part can be replaced with a screwdriver or bolt extractor depending on what is holding the carburetor together. The choke shutter can then be replaced and tested to make sure it opens and closes properly. This genuine OEM choke shutter is durable and easy to install. It is made from durable metal and is sold individually.

This is a Husqvarna carburetor kit intended for use with brush cutters and trimmers. The carburetor is what mixes air and fuel together before it is passed to the engine for ignition. Carburetors may become clogged, damaged or worn. Check for problems with idling, an engine that won't start, or smoke from the equipment. Without a functioning carburetor, the equipment will not work, so a replacement is necessary.If the device is full of fuel and its engine won't start, the carburetor may be faulty. To replace a carburetor, a screwdriver is required. Wear protective gloves. Make sure the machine and engine are cooled before beginning. It is a simple task to replace the carburetor in Husqvarna trimmers and edgers.This Husqvarna carburetor is a genuine OEM part. It is sourced directly from the Husqvarna manufacturer. The carburetor is sold as an individual unit. The replacement part is only compatible with Husqvarna brand trimmers and edgers. It is made of high-quality, durable materials.

This high speed needle valve is used in various types of lawn and garden equipment. It is a standard piece of hardware that may be used for different purposes based on the model of the unit that a user owns. In many cases, the high-speed needle valve fits into the carburetor block and helps the equipment run at top performance. In some cases, the high-speed needle valve will become damaged and need to be replaced. The needle valve is part of the float valve along with the float and seat. The needle sits inside of the seat and when it is forced in, it prevents fuel from going into the float bowl. The valve should be open when the carburetor is dry and closed when the fuel chamber is filled. When replacing this component, basic tools and work gloves will be needed.This high speed needle valve is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The needle valve is created to be compatible with string trimmers, hedge trimmers, leaf blowers, edgers, and pole pruners manufactured by Echo and Shindaiwa.