Pruner Filter

The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.

Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.

Symptoms of a bad fuel pick up assembly include:

• Engine not starting or hard to start
• Engine stalling or running inconsistently
• Reduced power or performance
•  Visible damage or clogging in the fuel line

This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.

The fuel filter is designed to clean the fuel before it enters the carburetor. This helps to catch dirt and debris that can get into the fuel line and build up over time, affecting the performance. When there is a clean fuel filter in place, the engine will run at peak performance. Over time, the filter will become dirty and clogged with debris and fuel residue, requiring replacement as a part of routine maintenance. This OEM replacement can get lawn and garden equipment back in shape in no time. Prior to the repair, make sure to disconnect the spark plug and drain the fuel. This genuine OEM fuel filter from Husqvarna is compatible with multiple models of engines. It can be used with chainsaws from Poulan, Jonsered, and Husqvarna, including more than 150 different models. This filter is sold as an individual unit.

This genuine Husqvarna filter holder can be used as a replacement part for string trimmers. The function of a filter holder, otherwise known as an air box, is to take in external air flow and channel it through a network of valves into the cylinder of the engine, which is where the fuel combusts and ignites the spark plugs.A filter holder might have to be replaced if it shows symptoms of disrepair or malfunction that prevent it from transferring air flow into the cylinder. These symptoms of damage could include an engine that won't start or misfires frequently, reduced fuel economy, or block smoke pouring out of the exhaust. Though these symptoms are not necessarily directly attributable to the filter holder, if a visual inspection shows that a damaged filter holder is indeed responsible, it should be replaced immediately. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This filter holder is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.

This air filter is a part of the air cleaning system on select lawn and garden engines. Combustion engines take in air and that is mixed with the fuel in the carburetor and then sent to the engine. The air filter is designed to catch particles and debris that come into the engine so that the air getting through is clean and pure. The filters naturally become clogged with regular use so replacing them is a part of routine maintenance that should be done every six to 12 months, depending on frequency of use. In some cases, the filter may become clogged in between maintenance, which would require an additional replacement. It may be helpful to keep an extra filter on hand. This OEM air filter is manufactured by Poulan to exact standards. It fits a variety of Poulan machines, as well as those from Weed Eater, AYP, and Husqvarna. It is used in various models of pruners and trimmers and does not require any tools for replacement. The air filter is made of durable foam material and designed to catch fine particles to ensure the cleanest air enters the engine. It is sold individually.

This foam air filter is a genuine replacement for select Husqvarna engines. The air filter is made from high-quality foam that allows it to capture particles and debris before they enter the carburetor to improve engine performance. The air filter naturally becomes clogged over time with regular use of the machine and will need to be changed regularly in order to prevent restricted airflow that could affect engine performance. It will require replacement as a part of routine maintenance, but intermittent repairs may come up, as well. It is often a good idea to keep an extra air filter on hand for emergency replacements. This genuine OEM part is the perfect fit for compatible engines. This genuine replacement air filter is designed for use with trimmers, pole saws, edgers, brushcutters, and other select models. This air filter comes pre-oiled and is able to be installed without any tools. Allow the engine to cool before changing the air filter or doing any other repairs. This air filter is sold as an individual unit.

The air filter on lawn machines protects from dirt and debris. Lawn equipment typically creates a substantial amount of dust and dirt, and the air filter is needed to ensure that dirt does not get into the engine and the carburetor. The air filters are designed to trap dirt, which means that they will eventually need to be replaced. The longer they are used, the more clogged they will become. This can prevent enough air from getting into the carburetor, which could result in issues with the engine misfiring and starting properly. Owners should regularly check the condition of the air filters and replace them when they become too dirty. This is a genuine OEM part sold individually that will replace air filters on trimmers, leaf blowers, and pole pruners. The part is compatible with a range of brands including Craftsman, Weed Eater, Poulan, and Husqvarna.

The genuine replacement air filter is made of foam and catches dust and debris from the air as it enters the engine on select lawn and garden equipment. Over time, filters will become clogged with regular use, which makes replacing them a part of routine maintenance on most engines. The air filter may also become clogged intermittently or due to excessive dust buildup between maintenance schedules, so it may be helpful to keep an extra filter on hand for emergency replacements. These filters cannot be cleaned and must be replaced when they become clogged. This genuine OEM filter is manufactured to exact standards by Husqvarna and is designed for use with hundreds of machines from Jonsered and Husqvarna, including blowers, trimmers, edgers, hedge trimmers, and saws. Replacing the air filter does not require any tools. Allow the engine to cool and simply remove the filter cover, take out the old filter, and replace the new filter. Then replace the cover. Always wear gloves when performing engine work. This filter is sold as a single unit and does not include the air filter cover or base assembly.

This is a quality air filter used with many types of gas powered string trimmers. The air filter plays an important part in the engine since it ensures the motor only has clean air available. The air filter is responsible for catching dirt, dust, and other debris and collecting it in one place before it can move into other components of the trimmer. The air filter needs to be inspected on a regular basis for damage or clogging. If either of these things occurs, the air filter needs to be replaced to ensure the engine gets clean air.No tools are needed to replace this string trimmer air filter. The bolt knob that secures the air filter cover will need to be removed first. Remove the original air filter and place the new one in the same location. Reassemble the parts and make sure to test the string trimmer before use.This air filter is compatible with various string trimmers manufactured by Poulan, Poulan Pro, and Craftsman. It is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer.

This is a quality inlet screen that can be used in many types of outdoor power equipment. The strainer is used in a variety of types of lawn and garden equipment. It is most commonly used in the fuel system of the carburetor for tools with small engines. If this part is damaged or broken, the carburetor may experience issues. With carburetor issues, the engine may not start even if the fuel tank is filled with gasoline. Testing for carburetor issues can be done by removing the air filter and inserting a small amount of fuel into the carburetor. If the engine turns on but then turns off again, one of the carburetor parts may have gone bad. If it is the inlet screen, the carburetor will need to be removed from the equipment and disassembled. The screen can be pried out of the carburetor so the new one can be installed in its place.This is an authentic OEM replacement part that is sourced directly from the manufacturer. This inlet screen is sold as an individual part. The screen is created to be compatible with string trimmers, leaf blowers, hedge trimmers, chainsaws, and pole pruners manufactured by Echo and Shindaiwa.

This is a foam pad rests next to the oil outlet pipe on several types of lawn and garden equipment. It acts as insulation and can prevent excess vibrations while the equipment is in use. Over time, this foam pad can start to break down, rip, or become damaged and may need to be replaced. Replacing the foam pad on a chainsaw or other machine will require a wrench. The equipment will need to be disassembled so that there is access to the foam pad and the oil outlet pipe. The old component can be removed and the new one can be installed in the same location. Once the part is installed, reassemble the other components before using the tool again. A pair of work gloves is useful for making a replacement to the foam pad.This foam pad is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The foam pad is made to be used with Echo string trimmers, pole pruners, and chainsaws. This part is sold individually.