Parts for Bosch WFVC544CUC/29: Pump Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This hose inlet connects the household water line to the appliance's fill system, restoring proper water delivery for normal cycles. It's a direct replacement for damaged, cracked, or leaking inlet hose assemblies. What it does

• Channels incoming water from the supply into the appliance's fill system.
• Prevents leaks at the supply connection when intact and properly installed.
• Commonly replaces hoses that are cracked, split, or worn and causing visible leaks.
• Can resolve issues with poor or no water fill when the hose is blocked or damaged.

• Disconnect power and shut off the water supply before starting.
• Inspect and replace any worn O-rings, ferrules, or clamps as needed.
• Hand-tighten fittings, then secure with recommended clamps; avoid overtightening.

This hose inlet is the dishwasher water-connection fitting that routes incoming water into the appliance. It provides a secure connection to help prevent leaks and ensure consistent water supply for normal wash cycles. What it does:

• Connects the household water supply to the dishwasher's internal water system
• Seals the inlet to help prevent drips or leaks at the connection point
• Ensures the appliance receives steady water flow for proper filling and operation
• Be replaced when the inlet is cracked, corroded, or leaking

• Disconnect power and shut off the water supply before starting any work
• Inspect and replace any worn O-rings or gaskets when installing the new inlet
• Hand-tighten fittings and then check for leaks; retorque per OEM guidance if available

The Cold Water Inlet Valve is an OEM part for Bosch washing machines. It is designed to regulate the flow of cold water into the washing machine during the wash cycle. This valve operates based on signals from the washing machine's control board, ensuring the right amount of cold water is provided.

Causes of a faulty cold water inlet valve can include wear and tear over time, clogs or blockages in the valve, electrical issues, or valve failure.

Symptoms of a bad cold water inlet valve may include:

• Insufficient or no cold water flow into the washing machine
• Leaking or dripping water from the valve during the wash cycle
• Inconsistent or inadequate water supply for washing clothes
• Error codes related to water supply or filling

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Note: For the Hot Water Valve, order part number 00422245.

The Hot Water Inlet Valve is an OEM part for Bosch washing machines. It regulates the entry of hot water into the machine, crucial for cycles requiring warm or hot washes. Activated by the machine's control system, this valve opens at the precise moment to allow the correct amount of hot water to mix with the cold, ensuring the selected temperature setting is accurately achieved. 

The causes behind issues with the hot water inlet valve often include sediment build-up from hard water, wear and tear from regular use, or electrical failures preventing the valve from operating.  

Symptoms of a malfunctioning Hot Water Inlet Valve include:

• Water that is too cold 
• No water entering the machine 
• Leaks around the valve area 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This hose inlet is the molded connection that routes incoming water into the appliance and provides a sealed mating point for the fill hose. It restores proper water flow and helps prevent leaks at the hose connection. What it does

• Directs incoming water from the fill hose into the appliance's water system.
• Provides a sealed connection to prevent drips or leaks at the hose attachment.
• Can cause no-fill or slow-fill symptoms when cracked, clogged, or loose.
• Works with the inlet hose and nearby fittings to maintain correct water supply.

• Turn off power to the appliance and shut off the water supply before starting.
• Inspect and replace any damaged gaskets or clamps when installing this part.
• Hand-tighten fittings, then snug with appropriate tools; avoid overtightening plastic fittings.
• After installation, restore water and power, run a short cycle, and check all connections for leaks.

This T-shaped water hose connector routes incoming water to separate internal hose lines, restoring proper water distribution inside the appliance. It replaces a worn or cracked hose tee to stop leaks and restore flow to internal components. What it does:

• Joins three water lines so water can be directed to multiple internal points
• Stops leaks caused by cracked or damaged tee fittings at hose junctions
• Restores reliable water flow to downstream parts that depend on the split connection
• Prevents hoses from separating at a failing junction

• Turn off and disconnect the appliance from the water supply before servicing
• Inspect hose ends and clamps; replace clamps or seals if worn
• Push hoses fully onto each barb and secure with appropriate clamps
• After installation, restore water and check all connections for leaks

The Hose Clamp is an OEM part for Bosch washers. This clamp secures connecting hoses to direct water flow where needed.

Causes of a bad hose clamp can be wear and tear over time, accidental damage from maintenance or repairs, or degradation of the clamp material from chemical exposure.

Symptoms of a bad hose clamp include:

• Leaks around hose connections
• Loose or detached hoses
• Disrupted water flow impacting cleaning performance

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This fastening ring secures mating appliance components by locking parts in place to prevent movement or separation during operation. It's a simple yet essential hardware piece that helps maintain proper alignment and reliable function. What it does

• Holds mating parts together to prevent wobble, vibration, or dislocation
• Keeps seals and assemblies properly seated to reduce noise and misalignment
• Helps maintain correct component spacing for smooth operation
• Commonly replaced when the original ring is bent, worn, or missing

• Designed for use with compatible OEM assemblies; follow for correct placement
• Inspect mating surfaces and replace any damaged clips, seals, or gaskets before reassembly
• Use proper tools to avoid deforming the ring during installation; do not force into place
• Disconnect power and follow safety procedures before servicing the appliance

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This dispenser top cover replaces the plastic lid that protects and conceals the dishwasher detergent dispenser, restoring proper appearance and function. It helps keep the dispenser mechanism clear and reduces detergent exposure. What it does:

• Replaces a cracked, warped or visibly damaged dispenser lid that won't close properly
• Protects the detergent compartment from moisture and debris during cycles
• Helps ensure the dispenser cover seals and opens as intended during wash cycles
• Visible cosmetic repair for chipped or faded dispenser trim

• Disconnect power and water to the appliance before beginning any repair
• Keep fasteners and clips organized during reassembly; do not overtighten plastic screws

This white dispenser tray replaces a damaged or stained refrigerator dispenser drip tray to keep the area under the dispenser clean and catch spills. Restores proper fit and appearance for an even, tidy look. What it does:

• Collects drips and spills from the dispenser to protect the cabinet and floor
• Provides a finished, easy-to-clean surface under the dispenser area
• Snaps into the dispenser opening and holds securely under normal use
• Helps reduce odors and build-up by catching liquids before they reach internal surfaces

• Unplug or power off the appliance before removing the old tray
• Remove any standing water and debris, then lift or slide out the old tray per the appliance's user manual
• Align the new tray's tabs/rails with the dispenser opening and press until it seats
• If any clips are damaged or the tray doesn't seat securely, inspect surrounding trim before forcing into place

This dispenser tray insert replaces the small plastic cup insert inside the dishwasher detergent dispenser, helping the dispenser hold and release detergent properly for each wash. It restores correct detergent positioning and flow. What it does

• Fits into the detergent dispenser cup to hold powder or tablets in place during loading and wash cycles
• Helps ensure detergent is exposed to water at the proper time for effective cleaning
• Common fix for cups that no longer hold tablets or where tablets fall out prematurely
• Prevents loose detergent pieces from blocking the dispenser latch or spray action

• Disconnect power to the dishwasher or turn off the circuit breaker before working on the dispenser
• Remove the top rack if needed to access the dispenser; clean the dispenser area before installing the insert
• Press the insert into the dispenser until it snaps into place; confirm it sits flush and the dispenser door operates freely

The Screw is an OEM part for Bosch gas cooktops and ranges. It anchors the surface burner head assembly onto the cooktop surface.

Causes can be stripped threads or overall wear from repeated heating/cooling cycles. Exposure to cooking spills or impacts may also deteriorate the screw head over time.

Symptoms of a bad burner head screw include:

• A burner detaching from the cooktop surface entirely
• Excess movement or instability of burner heads when in use
• Gas leaks reported around the burner head connection points

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.