Kathy Z. January 28, 2012 for Model Number SHY66C Detergent dispenser will not open to allow soap to release during entire cycle. What part do we need to order for replacement to resolve this problem? Thank you!
1 Answer Hi Kathy. You need to replace the complete dispenser assy. part # 00431413. It has a circuit board along with it that may be burnt out and giving you the issue. It is a contained unit and needs the whole assy. replaced. You will need the gasket assy. part # 00166637. also. Thank You. Read More...
Suzieq January 11, 2012 for Model Number Bosch dishwasher SHU4306UC/U06 I have the detergent lid to replace, but not sure how to attach it to the spring.
1 Answer Hi SuzieQ. The new detergent lid AP2802328 snaps into the dispenser assembly. Be careful when doing this not to break the tabs on the new lid. Thank You. Read More...
Lizz October 09, 2011 for Model Number SHU33A06UC The little door that slides shut no longer snaps shut it just moves back and forth, The part that takes the blue liquid works fine. It's just the sliding cover, What part do I need?
1 Answer Hi Lizz. The detergent lid has a finger- type lock holder that seems to have broken on yours. Part # is 00166621. Thank you. Read More...
Calley July 26, 2011 for Model Number SHY66C05UC/14 The cap cover for the dishwasher detergent holder has broken off on my dishwasher. I'd like to order a replacement cover but I want to make sure I have the right one that will fit my model before I place my order. Thanks for the help!
1 Answer Hello Calley, the only lid we show being sold separate is for the rinse aid dispenser 00182136, the detergent lid is sold complete with the detergent dispenser part number 00431413. Hope this helps! Read More...
John S. July 21, 2011 for Model Number Bosch 6800 SHU The spring which pushes the detergent lid open is broken. Can I get a replacement?
1 Answer Hello John. To get the spring for the door, you will need to order the dispenser assembly 00263088. Hope this helps. Read More...
Brett July 07, 2011 Bosh shu4306uc... Lid will latch but then pops open. Looks like 1 of the 4 protruding knobs on the underside of the lid that hold the lid in the sliding track of the dispenser is broken. It appears this is causing the lid to be loose enough that it slides free of the latch. Does this make sense and if so, how do I remove the old lid and replace it?
1 Answer Hello Brett. The new detergent lid 00166621 snaps into the dispenser assembly. Be careful when doing this not to break the tabs on the new lid. Hope this helps. Read More...
Jay June 07, 2011 for Model Number shu9912uc/uc11 Our Bosch dishwasher tripping device has broken. I cannot remove the old latch from the door panel. It is broken very close to the bottom of the latch. How can I remove this broken tripping device so I can replace it?
1 Answer Hello Jay. If you can provide your email address, we can send you the service manual to help you with the repair. Thanks. Read More...
Nerio C. March 04, 2011 I have a whirlpool built in dishwasher that works well. The only problem is the detergent door. I cannot close it. The latch won't grab it to hold it shut. Can the latch be replaced? If so, how?
1 Answer Nerio, on some dishwasher models the door is not available separate from the dispenser. May we have your model number to verify the install and part numbers please? Thanks! Read More...
Guest February 24, 2011 I have a Bosh Dishwasher model number SHX46A05UC/14 .The soap dispenser lid doesn't open during the wash cycle therefore the soap didn't empty. It is suppose to spring out when working,now it doesn't do that. My question is how do you remove the lid to see what is goin on? I will apreciate your help, if you tell me how i fix this problem. Thank you.
1 Answer You can remove the screws around the inner door panel, to access the detergent door assembly, and release the door. Read More...