Robert April 07, 2022 for Model Number SHU9955UC/12 The start button on the top of the door has broken and needs to be replaced. The small interior button works fine but the larger button depresses the start button that's below it. Can the button on the top of the door be replaced and if so what is the part number. Robert
1 Answer Robert, unfortunately, the push button pad 00184591 for the model provided has been discontinued by the manufacturer and is no longer available. Read More...
Sue June 07, 2021 for Model Number SHU6805 UC/12 (FD 8003-) I need to replace the Dispenser Assembly, as the soap door is very tricky to close, and the rinse dispenser section must be leaking out, as it is empty within days. The model on my Bosch dishwasher door is SHU6805 UC/UC12 What part number should I order? Thank you.
1 Answer Sue, Based on the model information provided the dispenser part number would be 00488964 Read More...
T. Morrow December 12, 2018 for Model Number Bosch Dishwasher SHV46C03 UC14 I bought and received the soap dispenser from you (Part Number: AP3195342) for Bosch Dishwasher SHV46C03 UC14. I've watched your video and other videos on replacing it; it looks pretty easy. Except I can't get it seated all the way in so the plastic tabs snap into place along the edge of that metal lip. I've tried everything and wrestled with it for 45 minutes, but it won't seat far enough in to snap into place. Do you have any ideas to try before I call an appliance repair person to get it in properly? I was trying to save this expense, but I'm not having much success getting it in myself. Thanks.
1 Answer T. Morrow, Aside from making sure that it is being installed right side up according to how the old one came out it may just be a matter of pushing on the dispenser while pushing the back part of the door to get it to lock in. The seal may be what is causing this and may just need to try to compress it more to allow the dispenser to snap in. Read More...
Vivian August 13, 2018 for Model Number Gaggenau dishwasher SHUGGE1UC/U12 The soap dispenser in my Gaggenau SHUGGE1UC/U12 dishwasher has started not opening the soap dispenser during the wash. Detergent pack goes into the slot, the door latches into place, but at the end of the cycle, the door is still closed and after manually opening the door, there is a partially used detergent pack inside. I see two replacement parts - the Dispenser ($90), and the Dispenser Assembly ($150). What is the difference and which one do I need?
1 Answer Nina, Normally a rinse aid dispenser will last 30 days and if it is having to be refilled more than that then the issue will most likely be a faulty dispenser which would need to be replaced. Read More...
Scott March 18, 2017 for Model Number SHE55m15uc My detergent dispenser leaks rinse aid, but don't see my model number listed on any of the dispensers you have, can you check for the correct number/
1 Answer Scott, The part number for the dispenser assembly on your unit will be 00490467. Read More...
Sherry July 07, 2016 for Model Number SHU43C02UC/47 I need to replace the detergent dispenser assembly in my Bosch dishwasher as neither the detergent or rinse agent doors will remain closed. Can you confirm the part # I need to order. Thx.
1 Answer Hello Sherry. You will need to order 00490467 for the dispenser assembly needed for the unit. Read More...
Wilton R. June 08, 2016 for Model Number SHV4303UC/U06 I ordered a new dispenser assembly, Part # 00490467 which apparently is a non-vented dispenser. My Bosh has a vented model (408 673). The new one has a connector on the left end that my installed one does not. Can I use the non-vented one in my dishwasher? What is the purpose of the venting. We notice some leaks on the floor that come from it. Thanks
1 Answer Wilton, You can use either or, but you need to expect to see water dripping on the floor. The correct "vented" dispenser is part number 00263088 00263088. it is in stock and available at this time. the connector is for attaching the door vent to the detergent dispenser, make sure it fits correctly. The vented dispenser helps to promote more efficient drying, and the vent tube acts like a condenser tube to eliminate the moisture. Read More...
Bill May 10, 2016 for Model Number SHV57C03UC/31 FD8604 00417 You have more then one dispenser listed for my Bosch dishwasher (SHV57C03UC/31 FD8604 00417). Which one is the replacement which should be used?
Rob February 05, 2016 for Model Number bosch shx33a dishwasher Hi The sliding door of the dispenser will not stay shut . It seems that the catch is not working. Do I need to replace the entire dispenser unit and if so which part number is it Thanks