Customer Questions and Answers for Outer Door by Bosch

Diana, Yes you can install the stainless steel door panel and handle. The parts needed are 00774391 / 00774391 Door Outer, and 12012913 / 12012913 Pocket Door Handle, Silver. The parts are in stock and available at this time. Replacing the panel will be somewhat simple, Remove power to the dishwasher, open the door, remove the six T20 torx screws (3 on each side) holding the panel to the inner door liner, close the door and slide the panel down . Install the handle using the original screws from the original panel, and reverse the procedure. Restore power and check the dishwasher operation. The Torx driver or torx tip kit is usually available at the local hardware store or home improvement center or local auto parts dealer. Thanks,

Hello Craig. You will need to order a custom panel from a cabinet maker or a cabinet shop. Thank you.

Hello Cathy, The outer door panel can be replaced with 00680002.

Sbarrytown, Unfortunately this unit was not manufactured in stainless steel and would not have a panel for this.

Hello Anita, we list part number 00689412 as the stainless steel door. We cannot guarantee a fit since this panel was not originally listed with your model number, slight modification might be needed to make it fit. Thanks!

Kathy, To change the unit to stainless you will want to get the fascia panel 00475225, program buttons 00601572, on/off button 00425565, and door panel 00478778.

Natasha, The part number for the outer door panel on this unit would be 00684157.

Hello KC, unfortunately the manufacturer did not release a stainless steel version of your model number. The closest match uses part number 00478778 for the outer door panel and control panel is part number 00665887. We cannot guarantee a fit of these parts are they were not originally listed with your model number, slight modification might be needed to make it fit. Thanks!

Liz, In order to change the unit to stainless you will need the fascia panel 00682918, on/off button 00616599. right program buttons 00623006, left program button 00623007, start button 00616598, door panel 00683615, toe panel 00668687, and screws 00603934.

Anne, To change the unit to stainless you would need the following parts: the fascia panel 00686740, on/off button 00616599, program buttons right 00627608, program buttons left 00627609, start button 00616598, Door panel 00770776, toe panel 00668687 and screws 00626649.